 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
bob88
Joined: 24 Feb 2013
Posts: 99
|
 Posted: Fri Jun 19, 2015 11:00 am Post subject: More on the red cube... |
 |
|
Has anyone with experience mounting the red cube between the servo and spider hanging free inline (no bracket, just suspended in the hose line)? This looks like it will take 45 deg fittings on the cube and it will hang at about a 45 deg uphill flow position. Seems like this is simplest way to go...
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
flying-nut(at)cfl.rr.com
Guest
|
| Posted: Fri Jun 19, 2015 11:21 am Post subject: More on the red cube... |
|
|
I'd be worried about engine vibration on an unsupported hose assembly
making the readings inaccurate.
Just thinking out loud.
Linn
On 6/19/2015 3:00 PM, bob88 wrote:
| Quote: |
Has anyone with experience mounting the red cube between the servo and spider hanging free inline (no bracket, just suspended in the hose line)? This looks like it will take 45 deg fittings on the cube and it will hang at about a 45 deg uphill flow position. Seems like this is simplest way to go...
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=443816#443816
-----
No virus found in this message.
Checked by AVG - www.avg.com
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Dave Saylor
Joined: 11 Jan 2015
Posts: 209
Location: GILROY, CA
|
| Posted: Fri Jun 19, 2015 1:19 pm Post subject: More on the red cube... |
|
|
I initially had mine like you're describing. Accuracy was fine but after a premature failure (400 hrs?) I mounted it to a bracket and it's been good for 1000+. I believe there's a note about orienting the wires upwards, not sure if that means straight up or mainly up.
FWIW, EI replaced my cube no questions asked.
- D
On Friday, June 19, 2015, bob88 <marty.crooks(at)comcast.net (marty.crooks(at)comcast.net)> wrote:
[quote]--> RV10-List message posted by: "bob88" <[url=javascript:;]marty.crooks(at)comcast.net[/url]>
Has anyone with experience mounting the red cube between the servo and spider hanging free inline (no bracket, just suspended in the hose line)? This looks like it will take 45 deg fittings on the cube and it will hang at about a 45 deg uphill flow position. Seems like this is simplest way to go...
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=443816#443816
===========
-List" target="_blank">http://www.matronics.com/Navigator?RV10-List
===========
FORUMS -
_blank">http://forums.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
target="_blank">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
--Dave
KWVI |
|
| Back to top |
|
|
rv10rob(at)gmail.com
Guest
|
| Posted: Fri Jun 19, 2015 2:16 pm Post subject: More on the red cube... |
|
|
The simplest way to go is to mount it in the tunnel, per plans. Perfectly accurate there (at least with my IO-540 w/ a standard FI system).
-Rob
On Fri, Jun 19, 2015 at 12:00 PM, bob88 <marty.crooks(at)comcast.net (marty.crooks(at)comcast.net)> wrote:
| Quote: | --> RV10-List message posted by: "bob88" <marty.crooks(at)comcast.net (marty.crooks(at)comcast.net)>
Has anyone with experience mounting the red cube between the servo and spider hanging free inline (no bracket, just suspended in the hose line)? This looks like it will take 45 deg fittings on the cube and it will hang at about a 45 deg uphill flow position. Seems like this is simplest way to go...
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=443816#443816
===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========
|
--
Rob Kochman
RV-10 Flying since March 2011
Woodinville, WA
http://kochman.net/N819K
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
kdb.rv10(at)gmail.com
Guest
|
| Posted: Fri Jun 19, 2015 2:21 pm Post subject: More on the red cube... |
|
|
I did that with a Floscan sensor. Put a 45 degree fitting in the fuel servo and wrapped the sensor and fuel line with fire sleeve. Works great. It should stay cooler than if mounted to the engine.
Kevin Belue
Sent from my iPhone
On Jun 19, 2015, at 2:00 PM, "bob88" <marty.crooks(at)comcast.net> wrote:
| Quote: |
Has anyone with experience mounting the red cube between the servo and spider hanging free inline (no bracket, just suspended in the hose line)? This looks like it will take 45 deg fittings on the cube and it will hang at about a 45 deg uphill flow position. Seems like this is simplest way to go...
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=443816#443816
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Kelly McMullen
Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ
|
| Posted: Fri Jun 19, 2015 3:34 pm Post subject: More on the red cube... |
|
|
Remaining cool is not an issue with fuel flow sending units. The negative to mounting in the tunnel is that you are between fuel pumps, and with the boost pump off, the fuel is being sucked under negative pressure to the mechanical pump. The sending units are designed to operate under positive pressure. Best locations are either between mechanical pump and servo or between servo and spider. The former is required by the STC for type certificated aircraft, the latter most common on experimental. The unit is best suspended on a bracket attached to the engine, so that vibrations are in sync with the engine. If you are concerned about heat, mount it under the intake manifold, and cover it with fireshield.
On Fri, Jun 19, 2015 at 3:12 PM, Kevin Belue <kdb.rv10(at)gmail.com (kdb.rv10(at)gmail.com)> wrote:
[quote]--> RV10-List message posted by: Kevin Belue <kdb.rv10(at)gmail.com (kdb.rv10(at)gmail.com)>
I did that with a Floscan sensor. Put a 45 degree fitting in the fuel servo and wrapped the sensor and fuel line with fire sleeve. Works great. It should stay cooler than if mounted to the engine.
Kevin Belue
Sent from my iPhone
On Jun 19, 2015, at 2:00 PM, "bob88" <marty.crooks(at)comcast.net (marty.crooks(at)comcast.net)> wrote:
> --> RV10-List message posted by: "bob88" <marty.crooks(at)comcast.net (marty.crooks(at)comcast.net)>
>
> Has anyone with experience mounting the red cube between the servo and spider hanging free inline (no bracket, just suspended in the hose line)? This looks like it will take 45 deg fittings on the cube and it will hang at about a 45 deg uphill flow position. Seems like this is simplest way to go...
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=443816#443816
>
>
>
>
>
>
>
>
>
>
==
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD |
|
| Back to top |
|
|
rv10flyer
Joined: 25 Aug 2009
Posts: 364
|
| Posted: Fri Jun 19, 2015 6:18 pm Post subject: Re: More on the red cube... |
|
|
Same here Rob, have not been off more than .5 gallon.
[quote="rv10rob(at)gmail.com"]The simplest way to go is to mount it in the tunnel, per plans. Perfectly accurate there (at least with my IO-540 w/ a standard FI system).
-Rob
On Fri, Jun 19, 2015 at 12:00 PM, bob88 <marty> wrote:
| Quote: | --> RV10-List message posted by: "bob88" <marty>
Has anyone with experience mounting the red cube between the servo and spider hanging free inline (no bracket, just suspended in the hose line)? This looks like it will take 45 deg fittings on the cube and it will hang at about a 45 deg uphill flow position. Seems like this is simplest way to go...
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=443816#443816
===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========
|
--
Rob Kochman
RV-10 Flying since March 2011
Woodinville, WA
http://kochman.net/N819K
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Wayne G. |
|
| Back to top |
|
|
Albert Gardner
Joined: 10 Jan 2006
Posts: 455
Location: Yuma, AZ
|
| Posted: Sat Jun 20, 2015 5:48 am Post subject: More on the red cube... |
|
|
I have the unit mounted in the tunnel as per Vans. No problems with accuracy
although variations in filling the tanks
can cause variations between calculated and actual amounts. In any case I'm
well satisfied with that location. I have a bottom cover into the tunnel
so I can quickly inspect the tunnel for leaks as well as clean the filter.
980 hours.
Albert Gardner
RV-10 N991RV
Yuma, AZ
(Little warm here but it's a dry heat)
--
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
RV-9A N872RV
RV-10 N991RV |
|
| Back to top |
|
|
larkrv10(at)gmail.com
Guest
|
| Posted: Sat Jun 20, 2015 5:50 pm Post subject: More on the red cube... |
|
|
Bob88, I mounted mine on a piece of .050" thick SS plate just above the fuel servo. I copied Ivan Kristensen's example.
Rick
#40956
Southampton, Ont
On Fri, Jun 19, 2015 at 3:00 PM, bob88 <marty.crooks(at)comcast.net (marty.crooks(at)comcast.net)> wrote:
[quote]--> RV10-List message posted by: "bob88" <marty.crooks(at)comcast.net (marty.crooks(at)comcast.net)>
Has anyone with experience mounting the red cube between the servo and spider hanging free inline (no bracket, just suspended in the hose line)? This looks like it will take 45 deg fittings on the cube and it will hang at about a 45 deg uphill flow position. Seems like this is simplest way to go...
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=443816#443816
===========
-List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?RV10-List
===========
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
chazking
Joined: 03 Jun 2011
Posts: 8
Location: NorthEast US
|
| Posted: Sun Jun 28, 2015 5:48 am Post subject: Red Cube - Floscan |
|
|
Initially, the floscan was in the tunnel & I was experiencing FF flucuations of 0.5 GPH, which made injector tuning "impossible!" After removing the floscan and replacing it with a red cube between the servo & distributor those fluctuations stopped & a good nozzle tune ensued!
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
1.86 MB |
| Viewed: |
15352 Time(s) |
|
| Description: |
|
| Filesize: |
1.86 MB |
| Viewed: |
15352 Time(s) |
|
|
|
| Back to top |
|
|
Lenny Iszak
Joined: 23 Mar 2008
Posts: 270
|
| Posted: Mon Jun 29, 2015 2:18 pm Post subject: Re: More on the red cube... |
|
|
Does anyone have the lengths of the two hoses required to move the redcube between the servo and spider?
Lenny
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Kelly McMullen
Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ
|
| Posted: Mon Jun 29, 2015 5:00 pm Post subject: More on the red cube... |
|
|
I used about 4.5 inches and maybe 24", with the cube mounted to a fab'd bracket under the #1 intake tube.
On Mon, Jun 29, 2015 at 3:18 PM, Lenny Iszak <lenard(at)rapiddecision.com (lenard(at)rapiddecision.com)> wrote:
[quote]--> RV10-List message posted by: "Lenny Iszak" <lenard(at)rapiddecision.com (lenard(at)rapiddecision.com)>
Does anyone have the lengths of the two hoses required to move the redcube between the servo and spider?
Lenny
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=444195#444195
===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD |
|
| Back to top |
|
|
larkrv10(at)gmail.com
Guest
|
| Posted: Mon Jun 29, 2015 7:41 pm Post subject: More on the red cube... |
|
|
Lenny, Steve from Aircraft Specialty made all my oil and fuel hoses (great to deal with btw), my servo to red cube hose is 12", the red cube to spider is 21". Of course it kind of depends on the location of the flow transducer. Mine is on a SS bracket just under the case, almost identical to what Ivan Kristensen did.
Rick
On Mon, Jun 29, 2015 at 6:18 PM, Lenny Iszak <lenard(at)rapiddecision.com (lenard(at)rapiddecision.com)> wrote:
[quote]--> RV10-List message posted by: "Lenny Iszak" <lenard(at)rapiddecision.com (lenard(at)rapiddecision.com)>
Does anyone have the lengths of the two hoses required to move the redcube between the servo and spider?
Lenny
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=444195#444195
===========
-List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?RV10-List
===========
FORUMS -
_blank" rel="noreferrer">http://forums.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
target="_blank" rel="noreferrer">http://www.matronics.com/contribution
===========
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
TimRVator(at)comcast.net
Guest
|
| Posted: Tue Jun 30, 2015 5:03 am Post subject: More on the red cube... |
|
|
I recently moved mine to that location to improve fuel flow accuracy and
to try to improve a hot idle issue. AFP recommended the location
(suspended in the fuel line, not attached to engine). EI (the red cube
manufacturer) shows that mounting method (straight fittings, between
servo and spider, not attached directly to engine) on page 20 of the
install manual, buy-ei.com/wp-content/uploads/2013/06/*II*-*FP*-*5*.*pdf
*
I like the improved flow accuracy at the new location.
--
Tim Lewis -- HEF (Manassas, VA)
A&P
RV-6A N47TD -- 1104 hrs - sold
RV-10 N31TD -- 650 hrs
bob88 wrote on 6/19/2015 3:00 PM:
| Quote: |
Has anyone with experience mounting the red cube between the servo and spider hanging free inline (no bracket, just suspended in the hose line)? This looks like it will take 45 deg fittings on the cube and it will hang at about a 45 deg uphill flow position. Seems like this is simplest way to go...
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=443816#443816
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
EdKranz
Joined: 29 Dec 2010
Posts: 132
Location: Hastings, MN
|
| Posted: Tue Jun 30, 2015 5:46 am Post subject: More on the red cube... |
|
|
Lenny,
I just marked where on that fuel line I wanted the RedCube and sent the original line to TSFlightLines. Tom put the fittings I needed on the original line. It fits great, and it was pretty cheap too. The only downside is that you're obviously not going to be flying when he has your fuel line!
Ed
On Mon, Jun 29, 2015 at 10:36 PM, Rick Lark <larkrv10(at)gmail.com (larkrv10(at)gmail.com)> wrote:
[quote]Lenny, Steve from Aircraft Specialty made all my oil and fuel hoses (great to deal with btw), my servo to red cube hose is 12", the red cube to spider is 21". Of course it kind of depends on the location of the flow transducer. Mine is on a SS bracket just under the case, almost identical to what Ivan Kristensen did.
Rick
On Mon, Jun 29, 2015 at 6:18 PM, Lenny Iszak <lenard(at)rapiddecision.com (lenard(at)rapiddecision.com)> wrote:
| Quote: |
get="_blank">http://www.matronics.com/Navigator?RV10-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Ed Kranz
RV10
Finishing
www.edandcolleen.com |
|
| Back to top |
|
|
kearney
Joined: 20 Sep 2008
Posts: 563
|
| Posted: Tue Jun 30, 2015 6:48 am Post subject: More on the red cube... |
|
|
Hi
It is very easy to make your own fuel lines (braided steel) and put on fire sleeve. You can get all the kit you need at a local speed shop.
Cheers
Les
Sent from my iPhone
On Jun 30, 2015, at 07:43, Ed Kranz <ed.kranz(at)gmail.com (ed.kranz(at)gmail.com)> wrote:
[quote]Lenny,
I just marked where on that fuel line I wanted the RedCube and sent the original line to TSFlightLines. Tom put the fittings I needed on the original line. It fits great, and it was pretty cheap too. The only downside is that you're obviously not going to be flying when he has your fuel line!
Ed
On Mon, Jun 29, 2015 at 10:36 PM, Rick Lark <larkrv10(at)gmail.com (larkrv10(at)gmail.com)> wrote:
| Quote: | Lenny, Steve from Aircraft Specialty made all my oil and fuel hoses (great to deal with btw), my servo to red cube hose is 12", the red cube to spider is 21". Of course it kind of depends on the location of the flow transducer. Mine is on a SS bracket just under the case, almost identical to what Ivan Kristensen did.
Rick
On Mon, Jun 29, 2015 at 6:18 PM, Lenny Iszak <lenard(at)rapiddecision.com (lenard(at)rapiddecision.com)> wrote:
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
List"">http://www.matronics.com/Navigator?RV10-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
|
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Lenny Iszak
Joined: 23 Mar 2008
Posts: 270
|
| Posted: Thu Jul 02, 2015 12:25 pm Post subject: Re: More on the red cube... |
|
|
Thanks for the lengths. Saves me from pulling my fancy plenum to take measurements...
I have the floscan in the tunnel and it's pretty accurate for calculating the fuel used, but it's bouncing around a lot for precise LOP adjustments.
Lenny
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Lenny Iszak
Palm City, FL
2014 RV-10, N311LZ - 500 hrs |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
