 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
tmckeon79(at)hotmail.com
Guest
|
 Posted: Sat Jul 18, 2015 1:35 pm Post subject: CJ-6 Primer issues |
 |
|
I am looking for some advice. The primer handel in my CJ was twisted to the side and moved up and down as normal to prime the engine. However it will not twist back to the off position. Any advice on how to fix this would be appreciated. Getting a look under the panel is quite difficult with all the wiring in the way. The Maintenance manuals I have don't shed much light on the subject.
Thanks,
Tom
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
 |
av8ter
Joined: 25 Apr 2015
Posts: 27
|
| Posted: Sat Jul 18, 2015 2:30 pm Post subject: Re: CJ-6 Primer issues |
|
|
sounds like a loose screw on top of the handle.
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
dsavarese0812(at)bellsout
Guest
|
| Posted: Sun Jul 19, 2015 5:50 am Post subject: CJ-6 Primer issues |
|
|
If the knurled nut is too loose, the plunger will not return to the center position. So first make sure the knurled nut is tight. If the knurled nut is tight and the plunger won't return to the center position, loosen the knurled nut and remove the plunger pump section. Look inside for anything that may be obstructing the plunger pump. On the end of the plunger there should be a small pin. If the pin is not there, it may have become lodged inside the pump thus preventing the plunger section from moving back to the "off"/center position. You would need to remove the entire assembly to disassemble it.
Dennis
From: Thomas McKeon <tmckeon79(at)hotmail.com>
To: "yak-list(at)matronics.com" <yak-list(at)matronics.com>
Sent: Saturday, July 18, 2015 4:31 PM
Subject: CJ-6 Primer issues
I am looking for some advice. The primer handel in my CJ was twisted to the side and moved up and down as normal to prime the engine. However it will not twist back to the off position. Any advice on how to fix this would be appreciated. Getting a look under the panel is quite difficult with all the wiring in the way. The Maintenance manuals I have don't shed much light on the subject.
Thanks,
Tom
| Quote: |
ronics.com/Navigator?Yak-List">http://www.matronics.com/Navigator?Yak-List
matronics.com/">http://forums.matronics.com
ronics.com/contribution">http://www.matronics.com/contribution
|
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
av8ter
Joined: 25 Apr 2015
Posts: 27
|
| Posted: Sun Jul 19, 2015 7:55 am Post subject: Re: CJ-6 Primer issues |
|
|
It there a screw that locks than handle down through the knurled nut? I've never look closely at mine but I adjust cap tightness with a screw (for what its worth)
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
av8ter
Joined: 25 Apr 2015
Posts: 27
|
| Posted: Sun Jul 19, 2015 7:59 am Post subject: Re: CJ-6 Primer issues |
|
|
schematic
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
145.85 KB |
| Viewed: |
3681 Time(s) |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
