Matronics Email Lists :: View topic - Building a buss bar for my wood and fabric biplane

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Building a buss bar for my wood and fabric biplane

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

efraim.otero(at)gmail.com
Guest

Posted: Thu Aug 20, 2015 11:25 am Post subject: Building a buss bar for my wood and fabric biplane

Dear All:

I have purchased and read Bob Nuckoll’s Aeroelectics book. I am a newbie in this matter and want to instal an electrical system on my plane. It is a fisher Celbrity powered by a Continental O200.



I bought a B&C Specialety BCh433 alternator which I plan to instal and get enough power generation to charge my battery and power a Sandia STX transponder and a flightline Fl760 Comms radio.



How do I go about constructing the Buss bar to hook my “avionics” up? I purchased some brass sheet bars but do not have a clue as to how to mount them, drill them and attach them to the firewall.



Any ideas? Pictures? Suggestions?



Thank you in advance for your input!

Cheers

Ephraim

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

donvansanten(at)gmail.com
Guest

Posted: Thu Aug 20, 2015 12:23 pm Post subject: Building a buss bar for my wood and fabric biplane

B and C fuse holders make great "bus" bars. On Aug 20, 2015 12:31 PM, "Efraim Otero Leongomez" <efraim.otero(at)gmail.com (efraim.otero(at)gmail.com)> wrote:[quote]--> AeroElectric-List message posted by: Efraim Otero Leongomez <efraim.otero(at)gmail.com (efraim.otero(at)gmail.com)>

 

 Dear All:

 I have purchased and read Bob Nuckoll’s Aeroelectics book. I am a newbie in this matter and want to instal an electrical system on my plane. It is a fisher Celbrity powered by a Continental O200.

 

 I bought a B&C Specialety BCh433 alternator which I plan to instal and get enough power generation to charge my battery and power a Sandia STX transponder and a flightline Fl760 Comms radio.

 

 How do I go about constructing the Buss bar to hook my “avionics” up? I purchased some brass sheet bars but do not have a clue as to how to mount them, drill them and attach them to the firewall.

 

 Any ideas? Pictures? Suggestions?

 

 Thank you in advance for your input!

 Cheers

 Ephraim

 

 ===========

  -

 Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List

 ===========

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ===========

 

 

 

 [b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

kjashton(at)vnet.net
Guest

Posted: Thu Aug 20, 2015 1:08 pm Post subject: Building a buss bar for my wood and fabric biplane

The cheapest and easiest way, IMO, is to use a Cooper Bussman fuse block for ATC blade fuses.  Power comes to the block, then through the fuses to the various systems.  Many versions here

http://www.cooperindustries.com/content/public/en/bussmann/transportation/products/power_distribution/fuse_panels.html



When I have wanted an essential bus, I take the fuse block apart, cut the large center conductor, solder on an extra mounting tab on the other end of it, and get two buses out of it.



You can mount them on the panel or out-of-the-way.

-Kent



 	  Quote: 	
		   On Aug 20, 2015, at 3:23 PM, Efraim Otero Leongomez <efraim.otero(at)gmail.com> wrote:

 

 

 

 Dear All:

 I have purchased and read Bob Nuckoll’s Aeroelectics book. I am a newbie in this matter and want to instal an electrical system on my plane. It is a fisher Celbrity powered by a Continental O200.

 

 I bought a B&C Specialety BCh433 alternator which I plan to instal and get enough power generation to charge my battery and power a Sandia STX transponder and a flightline Fl760 Comms radio.

 

 How do I go about constructing the Buss bar to hook my “avionics” up? I purchased some brass sheet bars but do not have a clue as to how to mount them, drill them and attach them to the firewall.

 

 Any ideas? Pictures? Suggestions?

 

 Thank you in advance for your input!

 Cheers

 Ephraim

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

user9253

Joined: 28 Mar 2008
Posts: 1920
Location: Riley TWP Michigan

Posted: Thu Aug 20, 2015 1:09 pm Post subject: Re: Building a buss bar for my wood and fabric biplane

A fuse block will be less expensive and might be easier to install.

The type sold by B&C has the output terminals on the front, but they can be bent backwards somewhat.  It is not designed to be mounted on the instrument panel, although it could be with some ingenuity.



http://www.bandc.biz/fuseholder12-slot.aspx



http://home.earthlink.net/~dswartzendruber/id13.html



The Bussman SERIES 15710 Looks like it is intended to be panel mounted.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Joe Gores

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum