 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Dee One
Joined: 29 Jun 2015
Posts: 48
|
 Posted: Sat Oct 03, 2015 12:39 pm Post subject: Center-of-Gravity for Mark 3 |
 |
|
I just completed the weight-and-balance for my newly rebuilt Mark3 (see attached file). I don’t have a manual for this plane. Can anyone tell me what the acceptable center-of-gravity range is for a Mk3 (as a distance from the leading edge)? Per my calculations, I’m getting numbers that show a substantially aft center-of-gravity. I’m getting, depending on loading condition COG ranging from 21.94” to 29.34”. One entry on the matronics website indicate that the range should be from 16.5” to 23.1” from the leading edge???
Thanks for your help, Dee LeBlanc
leblancds(at)cox.net (leblancds(at)cox.net)
cell 225-802-1038
~~~~~~~~~~~~~~~~
The Past is History
The Future is a Mystery
Today is a Gift
That’s Why They Call it the Present
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
Download |
| Filename: |
COG_Calculations.xlsx |
| Filesize: |
53.15 KB |
| Downloaded: |
298 Time(s) |
_________________
The Past is History
The Future is a Mystery
Today is a Gift
That’s Why They Call it the Present |
|
| Back to top |
|
 |
Richard Pike
Joined: 09 Jan 2006
Posts: 1671
Location: Blountville, Tennessee
|
| Posted: Sat Oct 03, 2015 1:53 pm Post subject: Re: Center-of-Gravity for Mark 3 |
|
|
According to the original manual, the cg is determined as a percentage of the chord, rather than a specific number of inches.
http://oh2fly.net/oldpoops/Lexan%20rear%20enclosure.html
Go to page 40 on the link, it is on 3 pages total, 40-43.
Looking at your figures, I realize that my answer is not exactly what you need, sort of an apples and oranges thing - here is how I did mine using the manual; see attachment.
Looking at my figures, my most forward CG is 12.91" from the LE, and the most rearward is 23.65", but your results may vary.
Note - when landing with a very forward CG, suggest not using flaps unless you have gap sealed the elevator to the stab, and the underside of the stab has VG's. Even then you will notice reduced control authority from the elevator.
Hope this helps.
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
85.99 KB |
| Viewed: |
5065 Time(s) |
|
_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0
Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing. |
|
| Back to top |
|
|
Larlaeb
Joined: 02 Apr 2013
Posts: 75
Location: League City, Texas United States
|
| Posted: Sat Oct 03, 2015 6:04 pm Post subject: Re: Center-of-Gravity for Mark 3 |
|
|
The range I use for my MkIII is:
Aft CG Limit is 23.1" or 35% of wing chord
Forward CG Limit is 16.5" or 25% of wing chord
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
pipercolt
Joined: 08 Jan 2012
Posts: 46
Location: Randolph New York
|
| Posted: Sun Oct 04, 2015 2:26 pm Post subject: Center-of-Gravity for Mark 3 |
|
|
Hi Dee
My Mark 3 Builders Manual show the same numbers as you have, 16.5" to 23.1". I hope that helps.
Bob
On Saturday, October 3, 2015 4:54 PM, Dee LeBlanc <leblancds(at)cox.net> wrote:
I just completed the weight-and-balance for my newly rebuilt Mark3 (see attached file). I don’t have a manual for this plane. Can anyone tell me what the acceptable center-of-gravity range is for a Mk3 (as a distance from the leading edge)? Per my calculations, I’m getting numbers that show a substantially aft center-of-gravity. I’m getting, depending on loading condition COG ranging from 21.94” to 29.34”. One entry on the matronics website indicate that the range should be from 16.5” to 23.1” from the leading edge???
Thanks for your help, Dee LeBlanc
leblancds(at)cox.net (leblancds(at)cox.net)
cell 225-802-1038
~~~~~~~~~~~~~~~~
The Past is History
The Future is a Mystery
Today is a Gift
That’s Why They Call it the Present
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
Dee One
Joined: 29 Jun 2015
Posts: 48
|
| Posted: Thu Oct 08, 2015 8:59 am Post subject: Re: Center-of-Gravity for Mark 3 |
|
|
Just completed the weight and balance utilizing a more accurate digital scale. The results seem to be reasonable with no nose balanced required. Attached are the results if you'd like to see them. Thanks for everyone's help.
Dee
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
Download |
| Filename: |
Weight & Balance (final)1.xlsx |
| Filesize: |
48.75 KB |
| Downloaded: |
335 Time(s) |
| Description: |
|
Download |
| Filename: |
Weight & Balance (final)1.xlsx |
| Filesize: |
48.75 KB |
| Downloaded: |
276 Time(s) |
_________________
The Past is History
The Future is a Mystery
Today is a Gift
That’s Why They Call it the Present |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
