Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Cessna OV protection + DIODE across ALT side of Master Swi

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
nuckolls.bob(at)aeroelect
Guest





PostPosted: Sun Dec 27, 2015 3:28 pm    Post subject: Cessna OV protection + DIODE across ALT side of Master Swi Reply with quote

At 07:35 AM 12/26/2015, you wrote:
Quote:
--> AeroElectric-List message posted by: "racerjerry" <gnking2(at)verizon.net>

Does anyone have any info regarding the internal circuitry of the Cessna over-voltage sensor? I am wondering if this sensor's internal transistorized circuit contains the equivalent of the removed diode and therefore a separate diode is no longer needed for arc suppression at the ALT side of the master switch. Hmmm.

I proposed a latching ov sensor circuit
to Cessna about 1970 with a schematic like
this

http://tinyurl.com/7g7mn6l

I never manufactured any and was not involved
in the qualification so I don't KNOW that
the drawing cited above exactly matches what
went into the airplanes . . . but a technician
who once worked for Electro-Mech and manufactured
the device after Hopkins lost the job says it's
"real close."

The diode is not included in any of my drawings
because it is assumed that the REGULATOR already
has the usual diode from F to ground.

The diode was part of the original Cessna installations
because the alternator switch actually controlled the
field relay inside the electro-mechanical regulators

http://tinyurl.com/d7ln4mt

This relay was not fitted with the recommended
diode. When the electro-mechanical regulators
were replaced with solid state . . . the diode
became part of the regulator and no longer
necessary at the switch.


Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
racerjerry



Joined: 15 Dec 2009
Posts: 202
Location: Deer Park, NY

PostPosted: Mon Dec 28, 2015 6:10 pm    Post subject: Re: Cessna OV protection + DIODE across ALT side of Master Reply with quote

Thank you very much, Bob. That was precisely the info that I needed.

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Jerry King
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group