Matronics Email Lists :: View topic - Flap/Fuse Interference

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Flap/Fuse Interference

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

philperry9

Joined: 23 Nov 2011
Posts: 381

Posted: Wed Jan 27, 2016 11:30 am Post subject: Flap/Fuse Interference

I'm in the process of rigging the ailerons, etc.  In the process of setting the ailerons, you have to set the flap first. 



In the process of setting the flap, I noticed that I have interference between the inboard section of the flap and the fuselage side skin.  (Photo attached)



Obviously I'm going to have to file down the edge of the flap to be able to get the full range of motion without interference.  



However, my question is 'how much'?  



When the flaps are fully retracted. (Inboard nose of the flap solidly against the rear spar doubler, how much of a gap do you have exposed to the naked eye?   



Thanks,

Phil



Sent from my iPhone

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

philperry9

Joined: 23 Nov 2011
Posts: 381

Posted: Wed Jan 27, 2016 11:33 am Post subject: Flap/Fuse Interference

With attachment this time...





Sent from my iPhone



 	  Quote: 	
		   On Jan 27, 2016, at 1:26 PM, Phillip Perry <philperry9(at)gmail.com> wrote:

 

 I'm in the process of rigging the ailerons, etc.  In the process of setting the ailerons, you have to set the flap first. 

 

 In the process of setting the flap, I noticed that I have interference between the inboard section of the flap and the fuselage side skin.  (Photo attached)

 

 Obviously I'm going to have to file down the edge of the flap to be able to get the full range of motion without interference.  

 

 However, my question is 'how much'?  

 

 When the flaps are fully retracted. (Inboard nose of the flap solidly against the rear spar doubler, how much of a gap do you have exposed to the naked eye?   

 

 Thanks,

 Phil

 

 Sent from my iPhone

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

image1.JPG

Description:

Filesize:

77.05 KB

Viewed:

2832 Time(s)

carl.froehlich(at)verizon
Guest

Posted: Wed Jan 27, 2016 12:19 pm Post subject: Flap/Fuse Interference

Yep - file as needed.  You don't need much clearance, say 1/16" or so.  That

way it will still clear after paint.



Carl



--

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

speckter(at)comcast.net
Guest

Posted: Wed Jan 27, 2016 12:29 pm Post subject: Flap/Fuse Interference

It doesn't need to be much. Just enough to allow you to paint and still have clearance. I would leave 3/16 before paint. 



Gary SPECKETER



 	  Quote: 	
		   On Jan 27, 2016, at 2:26 PM, Phillip Perry <philperry9(at)gmail.com> wrote:

 

 

 

 I'm in the process of rigging the ailerons, etc.  In the process of setting the ailerons, you have to set the flap first. 

 

 In the process of setting the flap, I noticed that I have interference between the inboard section of the flap and the fuselage side skin.  (Photo attached)

 

 Obviously I'm going to have to file down the edge of the flap to be able to get the full range of motion without interference.  

 

 However, my question is 'how much'?  

 

 When the flaps are fully retracted. (Inboard nose of the flap solidly against the rear spar doubler, how much of a gap do you have exposed to the naked eye?   

 

 Thanks,

 Phil

 

 Sent from my iPhone

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

rv10(at)texasrv10.com
Guest

Posted: Wed Jan 27, 2016 12:32 pm Post subject: Flap/Fuse Interference

File away.... 



Gaylon Koenning

 	  Quote: 	
		   On Jan 27, 2016, at 13:29, Phillip Perry <philperry9(at)gmail.com> wrote:

 

 With attachment this time...

 

 <image1.JPG>

 

 

 Sent from my iPhone

 

> On Jan 27, 2016, at 1:26 PM, Phillip Perry <philperry9(at)gmail.com> wrote:

> 

> I'm in the process of rigging the ailerons, etc.  In the process of setting the ailerons, you have to set the flap first. 

> 

> In the process of setting the flap, I noticed that I have interference between the inboard section of the flap and the fuselage side skin.  (Photo attached)

> 

> Obviously I'm going to have to file down the edge of the flap to be able to get the full range of motion without interference.  

> 

> However, my question is 'how much'?  

> 

> When the flaps are fully retracted. (Inboard nose of the flap solidly against the rear spar doubler, how much of a gap do you have exposed to the naked eye?   

> 

> Thanks,

> Phil

> 

> Sent from my iPhone

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

larkrv10(at)gmail.com
Guest

Posted: Wed Jan 27, 2016 4:54 pm Post subject: Flap/Fuse Interference

Phil, I filed off more than an 1/8" from both flaps and am glad I did.  Once the paint goes on your gap narrows.  I was also concerned with a little sideways movement of the flaps and their hinge supports too, so as I said, I had an 1/8" (before paint).

Rick

#40956

Southampton, Ont

RV10 completed but not test flying until April

On Wed, Jan 27, 2016 at 1:26 PM, Phillip Perry <philperry9(at)gmail.com (philperry9(at)gmail.com)> wrote:

 	  Quote: 	
		  --> RV10-List message posted by: Phillip Perry <philperry9(at)gmail.com (philperry9(at)gmail.com)>

 

 I'm in the process of rigging the ailerons, etc.  In the process of setting the ailerons, you have to set the flap first.

 

 In the process of setting the flap, I noticed that I have interference between the inboard section of the flap and the fuselage side skin.  (Photo attached)

 

 Obviously I'm going to have to file down the edge of the flap to be able to get the full range of motion without interference.

 

 However, my question is 'how much'?

 

 When the flaps are fully retracted. (Inboard nose of the flap solidly against the rear spar doubler, how much of a gap do you have exposed to the naked eye?

 

 Thanks,

 Phil

 

 Sent from my iPhone

 

 ===========

 br> fts!)

 r> > w.buildersbooks.com" target="_blank" rel="noreferrer">www.buildersbooks.com

 target="_blank" rel="noreferrer">http://www.matronics.com/contribution

           -Matt Dralle, List Admin.

 ===========

 -List" target="_blank" rel="noreferrer">http://www.matronics.com/Navigator?RV10-List

 ===========

  FORUMS -

 _blank" rel="noreferrer">http://forums.matronics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 target="_blank" rel="noreferrer">http://www.matronics.com/contribution

 ===========

- The Matronics RV10-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum