Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Sand Paper

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
Idea Innovations



Joined: 28 Jul 2015
Posts: 5
Location: Camden and Southern NJ

PostPosted: Sun Feb 28, 2016 7:06 am    Post subject: Sand Paper Reply with quote

The Camden Youth Aviation Program has Europa A189 which we will be building with inner city youth grades 8 to 12 at LEAP Academy in Camden, NJ, USA.

We are getting ready to go out to get donations for the materials that we will need to build the Europa. One item on our shopping list is sandpaper. Could the group please advise us on what type, grits and amount of sandpaper that we would need for the construction of the Europa.

Any other advice on what we would need would be greatly appreciated.

We are also looking for a supplier for a Rotax engine. Any recommendations would be appreciated. Also, if someone used something other than a standard firewall forward installation, we are looking for that also.

Thank You for your time and sharing your knowledge

All The Best

Ira

Ira Weissman Co-Founder
Camden Youth Aviation Program
856-354-0173 or 856-220-6918 (c)
camdenyouthaviation(at)live.com
www.camdenyap.org
Giving Youth The Dream Of Flight - Serving The Youth Of Camden And All Of Southern New Jersey


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Giving The Youth Of Camden And Southern New Jersey The Dream Of Flight
Back to top
View user's profile Send private message Visit poster's website
Idea Innovations



Joined: 28 Jul 2015
Posts: 5
Location: Camden and Southern NJ

PostPosted: Sun Feb 28, 2016 7:23 am    Post subject: Re: Sand Paper Reply with quote

Just a clarification. We are looking for a standard firewall forward kit.

Thanks again

Ira

Ira Weissman Co-Founder
Camden Youth Aviation Program
856-354-0173 or 856-220-6918 (c)
camdenyouthaviation(at)live.com
www.camdenyap.org
Giving Youth The Dream Of Flight - Serving The Youth Of Camden And All Of Southern New Jersey


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Giving The Youth Of Camden And Southern New Jersey The Dream Of Flight
Back to top
View user's profile Send private message Visit poster's website
h&jeuropa



Joined: 07 Nov 2006
Posts: 645

PostPosted: Tue Mar 01, 2016 1:12 pm    Post subject: Re: Sand Paper Reply with quote

Ira,

For the construction of the Europa you mostly need sandpaper to scuff sand mating surfaces prior to bonding. You also need to scuff sand prior to applying reinforcement BID fiberglass in areas like the wing ribs. For all this 80 grit is sufficient. You are trying to get the sheen off the surfaces prior to bonding. When you get to final filling and sanding the manual calls out 80 grit, followed by 180 grit and finally 360 (we used 320) grit. In all cases we found purchasing quality sandpaper from a supplier of automotive finishes was worth the extra cost. Most of our sandpaper is 3M or Norton. When you get to the final filling and sanding you will need sanding blocks, again available at the auto supply store. We used 2 3/4" wide adhesive backed rolls of sandpaper. One roll of each will probably suffice.

You also will find that PermaGrit tools are fantastic. Buy the kit because you will use all the different shapes. We also have several of the bars, 6", 12" and 24". The 24" will work well for final finishing and the adhesive sandpaper will stick to it.

Jim & Heather


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group