 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
handainc(at)madisoncounty
Guest
|
 Posted: Thu Mar 10, 2016 8:56 am Post subject: Weekend classes |
 |
|
Bob -
Do you have a schedule for classes that are coming up this year? I would be interested in attending if possible.
M. Haught
Sent from my iPad
On Mar 9, 2016, at 10:46 PM, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:
| Quote: | At 10:13 PM 3/9/2016, you wrote:
| Quote: | Crimping is faster, and if using subD connectors, allows mods and correcting mistakes in wiring. But it's a lot more expensive. If you have the skills to solder, it will work just as well as crimping. A good solder joint is better than a bad crimp, and bad crimps can happen, just like soldering. And soldered in-line splices are a lot more compact than a butt splice.
Charlie
On 3/9/2016 9:06 AM, Robert Reed wrote:
| Quote: | Art,
You have just gone and opened up a whole new can of worms considering that most, if not all, of the advice I have seen on this forum recommends CRIMPING over soldering in almost all cases. |
|
I don't know that this is true. Certainly, crimping
is faster, lower risk for damage to some components
and takes less skill to get repeatable joints. At
the same time, not everyone is going to invest in
some of the more expensive crimp tools just to build
one airplane.
One set of joints I ALWAYS solder it to put terminals
on fat wires
http://tinyurl.com/gm8lqxo
I seldom need to do this and just never found it
attractive to go buy the hydraulic tool and matching
die sets. I bought a hydraulic tool from Harbor
Freight a few years ago . . . worked good . . .
was a fine "masher". Problem was that the dies
provided did not always produce the void-free/
gas-tight joint on the combinations of wires and
terminals in my inventory. Sold the hydraulic
tool on eBay.
Bob . . .
|
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
nuckolls.bob(at)aeroelect
Guest
|
| Posted: Thu Mar 10, 2016 11:24 am Post subject: Weekend classes |
|
|
At 10:53 AM 3/10/2016, you wrote:
| Quote: | Bob -
Do you have a schedule for classes that are coming up this year? I would be interested in attending if possible |
I do them by invitation. If an EAA chapter
wants to host one and has the facilities, I
work with them to fill out the class roster.
I've not done one for and EAA chapter in some
time . . . the last two were for clients . . .
but "have program . . . will travel" . . .
Bob . . .
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
Norm Biron
Joined: 04 Feb 2009
Posts: 7
|
| Posted: Thu Mar 10, 2016 11:54 am Post subject: Weekend classes |
|
|
Hi Bob,
I'm president of EAA Chapter 168 in Dallas. We would be interested in hosting a class.
Please contact me by email normbiron(at)msn.com (normbiron(at)msn.com) to work out the details. We meet on the first Tuesday of the month at the Farmers Branch Library.
Norm Biron
Sent from my iPad
On Mar 10, 2016, at 1:38 PM, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:
| Quote: | At 10:53 AM 3/10/2016, you wrote:
| Quote: | Bob -
Do you have a schedule for classes that are coming up this year? I would be interested in attending if possible |
I do them by invitation. If an EAA chapter
wants to host one and has the facilities, I
work with them to fill out the class roster.
I've not done one for and EAA chapter in some
time . . . the last two were for clients . . .
but "have program . . . will travel" . . .
Bob . . .
|
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
handainc(at)madisoncounty
Guest
|
| Posted: Thu Mar 10, 2016 11:58 am Post subject: Weekend classes |
|
|
I am working on the Pacer Project that is certified and will be for sale. And I am doing research and gathering parts for the Wagabond we discussed on the phone awhile back with the extended baggage area. It will be my “keeper” airplane and Light Sport. So if you have any classes anywhere, I will try to make one. I know I can make things work using the “Connection”, reading and working out the details, but it does shorten the learning curve a lot to get some instruction!
M. Haught | Quote: | On Mar 10, 2016, at 1:22 PM, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:
At 10:53 AM 3/10/2016, you wrote: | Quote: | | Bob - Do you have a schedule for classes that are coming up this year? I would be interested in attending if possible |
I do them by invitation. If an EAA chapter wants to host one and has the facilities, I work with them to fill out the class roster. I've not done one for and EAA chapter in some time . . . the last two were for clients . . . but "have program . . . will travel" . . .
Bob . . .
|
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
handainc(at)madisoncounty
Guest
|
| Posted: Mon Mar 14, 2016 1:25 pm Post subject: Weekend classes |
|
|
Normand -
If you put something together on the classes, please let me know.
M. Haught
On 3/10/2016 1:52 PM, Normand Biron wrote:
| Quote: | Hi Bob,
I'm president of EAA Chapter 168 in Dallas. We would be interested in hosting a class.
Please contact me by email [url=mailto:normbiron(at)msn.com]normbiron(at)msn.com (normbiron(at)msn.com)[/url] to work out the details. We meet on the first Tuesday of the month at the Farmers Branch Library.
Norm Biron
Sent from my iPad
On Mar 10, 2016, at 1:38 PM, Robert L. Nuckolls, III <[url=mailto:nuckolls.bob(at)aeroelectric.com]nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)[/url]> wrote:
| Quote: | At 10:53 AM 3/10/2016, you wrote:
| Quote: | Bob -
Do you have a schedule for classes that are coming up this year? I would be interested in attending if possible |
I do them by invitation. If an EAA chapter
wants to host one and has the facilities, I
work with them to fill out the class roster.
I've not done one for and EAA chapter in some
time . . . the last two were for clients . . .
but "have program . . . will travel" . . .
Bob . . .
|
|
 This email is safe. www.avast.com
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
