Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

TruTrak Gemini ADI

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

Remi Guerner

Joined: 14 Dec 2010
Posts: 284

Posted: Sun Apr 17, 2016 5:19 am Post subject: TruTrak Gemini ADI

I am planning to replace my mechanical gyro instruments and get rid of the vacuum system. I am not contemplating a big screen PFD but would install a 3-1/4"  electronic AI. The TruTrak Gemini ADI would have my preference, but I am puzzled by the singularity of the pitch display which is not actual pitch attitude. My question to those who are using this instrument is: how easy is it to use it in simulated or actual IMC?

Remi Guerner

F-PGKL

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Dave Disney

Joined: 16 Aug 2010
Posts: 54
Location: Weston-Super-Mare

Posted: Wed Apr 20, 2016 12:16 pm Post subject: Re: TruTrak Gemini ADI

Remi,



Have you considered the new Garmin G5? There are some interesting details about it on the Vans forum here http://www.vansairforce.com/community/showthread.php?t=136282

This could possibly be a better bet than a Dynon D10 or Tru Trak.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

graeme bird

Joined: 15 Jul 2010
Posts: 434

Posted: Thu Apr 21, 2016 11:35 am Post subject: Re: TruTrak Gemini ADI

I have just fitted and tested out the Gemini AP which uses the same technology. I was sceptical about how it would be compared to steam but have been very impressed. I have used it for simulated IMC (holds and let downs and general) and its very usable.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

_________________
Graeme Bird
kit4 (Wagstaff) TBD
Kit3 G-CLXU (Gregory) mono 914 xs Woodcomp
Kit2 G-PATS - (kesterton) Mono Classic 912 warpdrive
Kit 1 G-UMPY - Mono Classic/XS 912S, Woodcomp G(@)gdbmk.co.uk

Remi Guerner

Joined: 14 Dec 2010
Posts: 284

Posted: Thu Apr 21, 2016 11:57 pm Post subject: TruTrak Gemini ADI

Thanks to those who have responded to my question. It seems only two Europas are fitted with the Gemini. Raimo Toivo says his Gemini (an early model AI only ) never worked properly while Graeme Bird says his (recently installed auto pilot version) works perfectly. That is not enough to make statistics!  Personally I am very satisfied with my experience with the TruTrak Pictorial pilot I installed 5 years ago, so I will probably go ahead with the Gemini ADI.



Remi Guerner

F-PGKL

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

pete(at)lawless.info
Guest

Posted: Fri Apr 22, 2016 12:09 am Post subject: TruTrak Gemini ADI

Hi Remi



I was looking at the information on th Gemini, just out of interest, and 

spotted a response on a forum suggesting ordinary attitude information 

was about to be available as an option.  May be worth asking TruTrak.



Regards



Pete

G-RMAC

On 22/04/16 08:56, Guerner Remi wrote:

 	  Quote: 	
		   



 Thanks to those who have responded to my question. It seems only two Europas are fitted with the Gemini. Raimo Toivo says his Gemini (an early model AI only ) never worked properly while Graeme Bird says his (recently installed auto pilot version) works perfectly. That is not enough to make statistics!  Personally I am very satisfied with my experience with the TruTrak Pictorial pilot I installed 5 years ago, so I will probably go ahead with the Gemini ADI.



 Remi Guerner

 F-PGKL

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

JonathanMilbank

Joined: 14 Apr 2012
Posts: 388
Location: Aberdeen area

Posted: Sat Apr 23, 2016 9:13 am Post subject: Re: TruTrak Gemini ADI

I've had no trouble with my little Dynon D6. It fits perfectly into the hole for the old AI and the square sides of the EFIS just touch the edges of the ASI and Altimeter. The compass remote sensing unit in the rear fuselage gives an accurate read-out across the top of the display.



Recently I replaced the balance ball, which is duplicated in the EFIS, with the VSI and the Airmaster prop controller now occupies the hole where the VSI was. A "slimline" balance ball now sits close under the D6.

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Airmaster6.jpg

Description:

Filesize:

2.19 MB

Viewed:

5605 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum