 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Mauledriver(at)nc.rr.com
Guest
|
 Posted: Mon Oct 10, 2016 2:00 pm Post subject: Anyone have a B&C LR3b Voltage Regulator handy? |
 |
|
I have 2 LR3bs installed on the firewall of my RV10 and need help. The
voltage output regulator screw is under a plastic cap on the unit. I
need the diameter of that brass screw's head.
The problem is that I need to adjust the voltage on one of the units but
I can't get a screwdriver on the head of this tiny screw because of
where the units are located. My solution is to fashion a screw driver
with a piece of brass tubing slightly larger than the screw to help
guide the screw into the slot.
My guess is that the screw's head is about 1/8" in diameter but that is
only a guess. Plus/minus 1/32" would do the trick. Thanks in advance!
Bill Watson
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
wgreenley
Joined: 09 Jan 2010
Posts: 100
Location: Dowagiac, MI
|
| Posted: Mon Oct 10, 2016 2:54 pm Post subject: Anyone have a B&C LR3b Voltage Regulator handy? |
|
|
I have one out I can check this evening.
On Mon, Oct 10, 2016 at 5:58 PM, Bill Watson <Mauledriver(at)nc.rr.com (Mauledriver(at)nc.rr.com)> wrote:
| Quote: | --> AeroElectric-List message posted by: Bill Watson <Mauledriver(at)nc.rr.com (Mauledriver(at)nc.rr.com)>
I have 2 LR3bs installed on the firewall of my RV10 and need help. The voltage output regulator screw is under a plastic cap on the unit. I need the diameter of that brass screw's head.
The problem is that I need to adjust the voltage on one of the units but I can't get a screwdriver on the head of this tiny screw because of where the units are located. My solution is to fashion a screw driver with a piece of brass tubing slightly larger than the screw to help guide the screw into the slot.
My guess is that the screw's head is about 1/8" in diameter but that is only a guess. Plus/minus 1/32" would do the trick. Thanks in advance!
Bill Watson
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
====================================
-
Electric-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================
|
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
