Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

battery charger vs power supply

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
arcticarrow(at)gmail.com
Guest





PostPosted: Sat Feb 11, 2017 9:01 am    Post subject: battery charger vs power supply Reply with quote

My aircraft maintenance manual recommends using a power supply when swinging the electric motor powered landing gear because the battery will loose power over time and slow the retraction time hiding problems with the mechanism. What is the difference between a battery charger and a power supply in this application? Will leaving a power supply connected without a load damage the battery or other electronics? What happens if the electrical load is greater than the output of the power supply?

Would appreciate you thoughts!
Bernie Willis


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
user9253



Joined: 28 Mar 2008
Posts: 1927
Location: Riley TWP Michigan

PostPosted: Sat Feb 11, 2017 9:37 am    Post subject: Re: battery charger vs power supply Reply with quote

The difference is both voltage and current capacity. The battery definitely has a greater current output capacity. The power supply might have a greater initial voltage. But that voltage could drop if the load is too great. If the power supply voltage drops below battery voltage, then the battery will supply the load. If you elect to test the landing gear using battery only, make sure that the battery is fully charged.
A power supply will not damage a battery or electronics provided that the polarity is correct and the voltage is not too high, less than 14.5
Although a battery could be damaged if a charger with a voltage much greater than 13 is left connected for an extended period of time, i.e., more than 24 hours.
Smart chargers are available that automatically reduce the voltage to a maintenance level once the battery is fully charged.


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Joe Gores
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group