 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
nuckolls.bob(at)aeroelect
Guest
|
 Posted: Sun Mar 19, 2017 11:44 am Post subject: Garmin magnetometer installation. |
 |
|
At 10:12 AM 3/17/2017, you wrote:
| Quote: | Thank you Stein for the reference to the wiring diagram, I hadn't seen it, had only looked in the magnetometer section. I figured it would require shielded wiring. The twisted pairs I was referring to are for the other wiring in the same wing, a Whelen LED position/strobe unit and a Facet fuel transfer pump. Whelen wants 20 ga wire for their unit and I need 16 gauge wire for the pump. I would buy twisted pair wire for these but I only see 22 ga twisted pair wire on your website. Maybe the best option is to use shielded wire for both.
Bob, thanks for your offer on shielded wire. I would need 50' total for the two runs to the magnetometer.
|
I've sent you a paypal invoice for shipping
Bob . . .
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
stein(at)steinair.com
Guest
|
| Posted: Sun Mar 19, 2017 1:41 pm Post subject: Garmin magnetometer installation. |
|
|
For the facet pump I wouldn’t worry too much if it were me (it’s only a periodic load anyway). For the strobes, we usually see (and stock) 3 conductor x AWG20 or AWG18 depending on what the mfgr spec’s.
Cheers,
Stein
From: owner-aeroelectric-list-server(at)matronics.com [mailto:owner-aeroelectric-list-server(at)matronics.com] On Behalf Of Robert L. Nuckolls, III
Sent: Sunday, March 19, 2017 2:41 PM
To: aeroelectric-list(at)matronics.com
Subject: Re: Garmin magnetometer installation.
At 10:12 AM 3/17/2017, you wrote:
| Quote: |
Thank you Stein for the reference to the wiring diagram, I hadn't seen it, had only looked in the magnetometer section. I figured it would require shielded wiring. The twisted pairs I was referring to are for the other wiring in the same wing, a Whelen LED position/strobe unit and a Facet fuel transfer pump. Whelen wants 20 ga wire for their unit and I need 16 gauge wire for the pump. I would buy twisted pair wire for these but I only see 22 ga twisted pair wire on your website. Maybe the best option is to use shielded wire for both.
Bob, thanks for your offer on shielded wire. I would need 50' total for the two runs to the magnetometer. |
I've sent you a paypal invoice for shipping
Bob . . .
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
