 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
digidocs
Joined: 04 Dec 2013
Posts: 59
|
 Posted: Wed Apr 19, 2017 10:38 am Post subject: Inlet baffling very baffling |
 |
|
Hi list,
Does anyone have pictures or other good pointers on how baffling should work around the sides of the inlet ramps?
I understand how the lower portion of the inlet ramp baffling is supposed to work, but the ramp upper/side portions have me stumped---in particular the outboard ramp edges. It almost seems like the plans say "put some baffle material on the edge of the ramp and then just stuff it up into the front of the cowl". If possible, I'd like to make it work better than that.
Your insight would be greatly appreciated.
David
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
mdaniell
Joined: 07 Nov 2009
Posts: 7
|
| Posted: Wed Apr 19, 2017 1:32 pm Post subject: Re: Inlet baffling very baffling |
|
|
I also wrestled with this. Fortunately my cowl lined up pretty close to the inlet ramps so I didn't attach any baffling material to the cowl. For the sides I pretty much followed the plans with the baffling stuffed behind the cowl. I'm getting cruise temps around 325 to 345 depending on conditions. I did get very CHTs on the first few flights, however these have settled down without any modification.
Regards
Martin
Aerosport IO540. Plasma iii and 1 magneto.[/quote]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Wedig435
Joined: 11 Oct 2016
Posts: 3
|
| Posted: Wed Apr 19, 2017 2:20 pm Post subject: Inlet baffling very baffling |
|
|
I used 4" scat ducting.
Attach it with pop rivets to the air cleaner.
I Compress it with some tie wire against the air cleaner when the lower cowling is off.
Just need one wire to hold it back while installing the lower cowling.
Install lower cowling, cut the tie wire, release the scat hose.
It compresses great against the lower cowling flange.
Air tight and easy.
402 hours RV 10 no problems.
Thanks, Jim Villani
Broker, Salesman
Great Real Estate
Mammoth Creek Excavation
702.379.5524
Jim(at)Sold702.com
-------- Original message --------
From: mdaniell <martin.daniell(at)bigpond.com>
Date: 2017/04/19 2:40 PM (GMT-08:00)
To: rv10-list(at)matronics.com
Subject: RV10-List: Re: Inlet baffling very baffling
--> RV10-List message posted by: "mdaniell" <martin.daniell(at)bigpond.com>
I also wrestled with this. Fortunately my cowl lined up pretty close to the inlet ramps so I didn't attach any baffling material to the cowl. For the sides I pretty much followed the plans with the baffling stuffed behind the cowl. I'm getting cruise temps around 325 to 345 depending on conditions. I did get very CHTs on the first few flights, however these have settled down without any modification.
Regards
Martin
Aerosport IO540. Plasma iii and 1 magneto.[/quote]
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=468617#468617
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
954.22 KB |
| Viewed: |
3705 Time(s) |
|
| Description: |
|
| Filesize: |
1018.46 KB |
| Viewed: |
3705 Time(s) |
|
| Description: |
|
| Filesize: |
1.1 MB |
| Viewed: |
3705 Time(s) |
|
| Description: |
|
| Filesize: |
1.51 MB |
| Viewed: |
3705 Time(s) |
|
_________________
Jim V |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
