Matronics Email Lists :: View topic - Wing Root Fuel Filters

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Wing Root Fuel Filters

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

kearney

Joined: 20 Sep 2008
Posts: 563

Posted: Mon Jun 12, 2017 7:39 am Post subject: Wing Root Fuel Filters

Hi



I have had a few PMs asking for pix of my wing root fuel filters. See the pix below.



Also, here is a link to the filters I used: https://www.summitracing.com/int/parts/ear-230206erl/overview/



There is one in each wing root so that there is redundancy. Also, as the filters are light, I didn't tie them off to anything else. They seem quite happy inline with the -6 al tubing.



Cheers



Les



C-GCWZ flying

C-GROK some assembly required.

2013-05-23 13.36.11.jpg

Description:

Filesize:

1.29 MB

Viewed:

11049 Time(s)

dilsonfrota(at)gmail.com
Guest

Posted: Mon Jun 12, 2017 10:19 am Post subject: Wing Root Fuel Filters

Thank you Les

       

       Nice spot, as you said much easier to access.

       

       I'm wondering to change mine

       

       Regards

       

       Dilson

       

     

     Em 12/06/2017 12:39, kearney escreveu:

     

      	  Quote: 	
		          	  Quote: 	
		  --> RV10-List message posted by: "kearney" <kearney(at)shaw.ca> (kearney(at)shaw.ca)



Hi



I have had a few PMs asking for pix of my wing root fuel filters. See the pix below.



Also, here is a link to the filters I used: https://www.summitracing.com/int/parts/ear-230206erl/overview/



There is one in each wing root so that there is redundancy. Also, as the filters are light, I didn't tie them off to anything else. They seem quite happy inline with the -6 al tubing.



Cheers



Les



C-GCWZ flying

C-GROK some assembly required.





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=469997#469997





Attachments: 



http://forums.matronics.com//files/2013_05_23_133611_234.jpg

jump2(at)sbcglobal.net
Guest

Posted: Mon Jun 12, 2017 11:26 am Post subject: Wing Root Fuel Filters

I would just be worried  of vibrations over long term. 

My thoughts



Sent from my iPad



On Jun 12, 2017, at 1:18 PM, Dilson <dilsonfrota(at)gmail.com (dilsonfrota(at)gmail.com)> wrote:

 	  Quote: 	
		                     Thank you Les

       

       Nice spot, as you said much easier to access.

       

       I'm wondering to change mine

       

       Regards

       

       Dilson

       

     

     Em 12/06/2017 12:39, kearney escreveu:

     

      	  Quote: 	
		          	  Quote: 	
		  --> RV10-List message posted by: "kearney" <kearney(at)shaw.ca> (kearney(at)shaw.ca)



Hi



I have had a few PMs asking for pix of my wing root fuel filters. See the pix below.



Also, here is a link to the filters I used: https://www.summitracing.com/int/parts/ear-230206erl/overview/



There is one in each wing root so that there is redundancy. Also, as the filters are light, I didn't tie them off to anything else. They seem quite happy inline with the -6 al tubing.



Cheers



Les



C-GCWZ flying

C-GROK some assembly required.





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=469997#469997





Attachments: 



http://forums.matronics.com//files/2013_05_23_133611_234.jpg

kearney

Joined: 20 Sep 2008
Posts: 563

Posted: Mon Jun 12, 2017 12:43 pm Post subject: Re: Wing Root Fuel Filters

Hi 



The vibration question is one that I considered. The filter is very light and so weight is not really a factor. The bends in the tubing allow movement so that should be okay. Between the B-Nut / filter / B-Nut there is nothing for vibration to affect. 



I don't really see how the filter is that much different from an install without the filter. At least from a vibration perspective. 



Cheers



Les

C-GCWZ flying

C-GROK some assembly required

flying-nut(at)cfl.rr.com
Guest

Posted: Mon Jun 12, 2017 12:50 pm Post subject: Wing Root Fuel Filters

My filter is in the tunnel, plumbed and       sealed.  There hasn't been any fuel or contamination in it (still       building).  I don't think it's wise to remove it and possibly       alter the integrity of the system.  I'll just add the filters in       the wing root and know I have a second filter for fuel to pass       through.

       Linn

       

       On 6/12/2017 2:18 PM, Dilson wrote:

     

      	  Quote: 	
		                Thank you Les

         

         Nice spot, as you said much easier to access.

         

         I'm wondering to change mine

         

         Regards

         

         Dilson

         

       

       Em 12/06/2017 12:39, kearney         escreveu:

       

        	  Quote: 	
		            	  Quote: 	
		  --> RV10-List message posted by: "kearney" <kearney(at)shaw.ca> (kearney(at)shaw.ca)



Hi



I have had a few PMs asking for pix of my wing root fuel filters. See the pix below.



Also, here is a link to the filters I used: https://www.summitracing.com/int/parts/ear-230206erl/overview/



There is one in each wing root so that there is redundancy. Also, as the filters are light, I didn't tie them off to anything else. They seem quite happy inline with the -6 al tubing.



Cheers



Les



C-GCWZ flying

C-GROK some assembly required.





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=469997#469997





Attachments: 



http://forums.matronics.com//files/2013_05_23_133611_234.jpg

	
       	
       

       

No virus         found in this message.

         Checked by AVG - www.avg.com

         Date: 06/12/17

civengpe

Joined: 14 Feb 2011
Posts: 105

Posted: Mon Jun 12, 2017 1:01 pm Post subject: Wing Root Fuel Filters

I think I'm going to do this exact thing during my condition inspection in September. Â 



Shannon

On Mon, Jun 12, 2017 at 3:49 PM, Linn Walters <flying-nut(at)cfl.rr.com (flying-nut(at)cfl.rr.com)> wrote:

 	  Quote: 	
		                     My filter is in the tunnel, plumbed and       sealed.Â  There hasn't been any fuel or contamination in it (still       building).Â  I don't think it's wise to remove it and possibly       alter the integrity of the system.Â  I'll just add the filters in       the wing root and know I have a second filter for fuel to pass       through.

       Linn

       

       On 6/12/2017 2:18 PM, Dilson wrote:

     

      	  Quote: 	
		                Thank you Les

         

         Nice spot, as you said much easier to access.

         

         I'm wondering to change mine

         

         Regards

         

         Dilson

         

       

       Em 12/06/2017 12:39, kearney         escreveu:

       

        	  Quote: 	
		            	  Quote: 	
		  --> RV10-List message posted by: "kearney" <kearney(at)shaw.ca> (kearney(at)shaw.ca)



Hi



I have had a few PMs asking for pix of my wing root fuel filters. See the pix below.



Also, here is a link to the filters I used: https://www.summitracing.com/int/parts/ear-230206erl/overview/



There is one in each wing root so that there is redundancy. Also, as the filters are light, I didn't tie them off to anything else. They seem quite happy inline with the -6 al tubing.



Cheers



Les



C-GCWZ flying

C-GROK some assembly required.





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=469997#469997





Attachments: 



http://forums.matronics.com//files/2013_05_23_133611_234.jpg

	
       	
       

       

No virus         found in this message.

         Checked by AVG - www.avg.com

         Date: 06/12/17

civengpe

Joined: 14 Feb 2011
Posts: 105

Posted: Mon Jun 12, 2017 1:04 pm Post subject: Wing Root Fuel Filters

Les,what was the reasoning for going with the 85 micron vs the 35 micron?

Shannon

On Mon, Jun 12, 2017 at 10:39 AM, kearney <kearney(at)shaw.ca (kearney(at)shaw.ca)> wrote:

 	  Quote: 	
		  --> RV10-List message posted by: "kearney" <kearney(at)shaw.ca (kearney(at)shaw.ca)>

 

 Hi

 

 I have had a few PMs asking for pix of my wing root fuel filters. See the pix below.

 

 Also, here is a link to the filters I used: https://www.summitracing.com/int/parts/ear-230206erl/overview/

 

 There is one in each wing root so that there is redundancy. Also, as the filters are light, I didn't tie them off to anything else. They seem quite happy inline with the -6 al tubing.

 

 Cheers

 

 Les

 

 C-GCWZ flying

 C-GROK some assembly required.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=469997#469997

 

 

 

 

 Attachments:

 

 http://forums.matronics.com//files/2013_05_23_133611_234.jpg

 

 

 

 ====================================

 -List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List

 ====================================

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ====================================

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ====================================

 b Site -

 Â  Â  Â  Â  Â  -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ====================================

tgmeyerster(at)gmail.com
Guest

Posted: Mon Jun 12, 2017 1:22 pm Post subject: Wing Root Fuel Filters

Did you weigh the fuel filters empty or with fuel in them?



Sent from my iPhone



 	  Quote: 	
		   On Jun 12, 2017, at 10:39 AM, kearney <kearney(at)shaw.ca> wrote:

 

 

 

 Hi

 

 I have had a few PMs asking for pix of my wing root fuel filters. See the pix below.

 

 Also, here is a link to the filters I used: https://www.summitracing.com/int/parts/ear-230206erl/overview/

 

 There is one in each wing root so that there is redundancy. Also, as the filters are light, I didn't tie them off to anything else. They seem quite happy inline with the -6 al tubing.

 

 Cheers

 

 Les

 

 C-GCWZ flying

 C-GROK some assembly required.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=469997#469997

 

 

 

 

 Attachments: 

 

 http://forums.matronics.com//files/2013_05_23_133611_234.jpg

dilsonfrota(at)gmail.com
Guest

Posted: Mon Jun 12, 2017 3:48 pm Post subject: Wing Root Fuel Filters

Good idea, Linn 

          Dilson

     

     Em 12/06/2017 17:49, Linn Walters       escreveu:

     

      	  Quote: 	
		                My filter is in the tunnel, plumbed         and sealed.  There hasn't been any fuel or contamination in it         (still building).  I don't think it's wise to remove it and         possibly alter the integrity of the system.  I'll just add the         filters in the wing root and know I have a second filter for         fuel to pass through.

         Linn

         

         On 6/12/2017 2:18 PM, Dilson wrote:

       

        	  Quote: 	
		                    Thank you Les

           

           Nice spot, as you said much easier to access.

           

           I'm wondering to change mine

           

           Regards

           

           Dilson

           

         

         Em 12/06/2017 12:39, kearney           escreveu:

         

          	  Quote: 	
		              	  Quote: 	
		  --> RV10-List message posted by: "kearney" <kearney(at)shaw.ca> (kearney(at)shaw.ca)



Hi



I have had a few PMs asking for pix of my wing root fuel filters. See the pix below.



Also, here is a link to the filters I used: https://www.summitracing.com/int/parts/ear-230206erl/overview/



There is one in each wing root so that there is redundancy. Also, as the filters are light, I didn't tie them off to anything else. They seem quite happy inline with the -6 al tubing.



Cheers



Les



C-GCWZ flying

C-GROK some assembly required.





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=469997#469997





Attachments: 



http://forums.matronics.com//files/2013_05_23_133611_234.jpg

	
         	
         

         

No virus           found in this message.

           Checked by AVG - www.avg.com

           Date: 06/12/17

Albert Gardner

Joined: 10 Jan 2006
Posts: 455
Location: Yuma, AZ

Posted: Mon Jun 12, 2017 4:40 pm Post subject: Wing Root Fuel Filters

The original installation has the filter clamped to the floor.

Albert Gardner

RV-10 N991RV

Yuma, AZ



--

_________________
RV-9A N872RV
RV-10 N991RV

kearney

Joined: 20 Sep 2008
Posts: 563

Posted: Mon Jun 12, 2017 6:07 pm Post subject: Re: Wing Root Fuel Filters

Shannon



I used the wrong ling link in my earlier post. I do use the 35 micron filters. The correct link is:



https://www.summitracing.com/int/parts/ear-230106erl/overview/



Cheers



Les



C-GCWZ Flying

C-GROK some assembly required

kearney

Joined: 20 Sep 2008
Posts: 563

Posted: Mon Jun 12, 2017 6:13 pm Post subject: Re: Wing Root Fuel Filters

Albert



You are quite right about the original location and the filters being attached to the floor.



All I can say is the filters / location / setup works for me. The tunnel location is difficult to access while the roots are easy to access. That makes more frequent checks / cleaning easier and therefore (IMHO) more likely.



Obviously I like my setup, otherwise I wouldn't do it this way. Others may not.



Cheers



Les



C-GCWZ Flying

C-GROK Some assembly required

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum