|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
nuckolls.bob(at)aeroelect Guest
|
Posted: Thu Jun 15, 2017 4:53 am Post subject: Question about Z19RB and OVP/Beaker and size wire |
|
|
At 10:17 AM 6/14/2017, you wrote:
Quote: | --> AeroElectric-List message posted by: "Achille" <mickael.t(at)live.fr>
Thank you Bob for your response.
How could I check if my alternator is compatible with en external OVP before wiring it ? (it is not wired anymore)
It was wired like the picture attached in this message. (drawn by constructeur)
Thank you.
Mickaël |
The last drawing is the 'magic' data. It shows that
your alternator is externally regulated -AND- that
the alternator control switch does indeed carry field
excitation current. Here's an exemplar application of
the crowbar ov module to your project.
[img]cid:7.1.0.9.0.20170615075025.0209e7b0(at)aeroelectric.com.0[/img]
Bob . . .
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
Description: |
|
Filesize: |
110.06 KB |
Viewed: |
4540 Time(s) |
|
|
|
Back to top |
|
|
Achille
Joined: 12 Jun 2017 Posts: 25 Location: Europe
|
Posted: Sat Jun 17, 2017 4:40 am Post subject: Re: Question about Z19RB and OVP/Beaker and size wire |
|
|
Many thanks !
Mickaël
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
Achille
Joined: 12 Jun 2017 Posts: 25 Location: Europe
|
Posted: Fri Jun 23, 2017 6:11 am Post subject: Re: Question about Z19RB and OVP/Beaker and size wire |
|
|
Hello again,
Just to ask a question about this OVP wiring.
I have a filter with it (b&c complet OVP system) for the relay I didn't put it to wire it like the diagram, but the filter have to be add or not in my system ?
What is his fonction ?
Mickaël
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
nuckolls.bob(at)aeroelect Guest
|
Posted: Fri Jun 23, 2017 8:45 am Post subject: Question about Z19RB and OVP/Beaker and size wire |
|
|
At 09:11 AM 6/23/2017, you wrote:
Quote: | --> AeroElectric-List message posted by: "Achille" <mickael.t(at)live.fr>
Hello again,
Just to ask a question about this OVP wiring.
I have a filter with it (b&c complet OVP system) for the relay I didn't put it to wire it like the diagram, but the filter have to be add or not in my system ?
What is his fonction ? |
The OVP system was configured for use with
a permanent magnet alternator. The filter
is only used with these machines. Your
internally regulated alternator only needs
the OV protection module.
Bob . . .
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|