Matronics Email Lists :: View topic - Archer Antenna in RV4

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Archer Antenna in RV4

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

noms1reqd(at)yahoo.com
Guest

Posted: Tue Jun 27, 2017 5:40 am Post subject: Archer Antenna in RV4

Does anyone have experience installing an Archer Comm antenna in an RV4 wingtip?

I'm considering the Archer Model 1A and have concerns that it will fit properly.

ARCHER SPORT AIRCRAFT COM ANTENNA MODEL 1A



        <![endif]-->    <![endif]-->       

    <![endif]-->              ARCHER SPORT AIRCRAFT COM ANTENNA MODEL 1A  ARCHER SPORT AIRCRAFT COM ANTENNA MODEL 1A These antennas have been designed by Bob Archer from Torrance, CA uti...

             

Thanks.

Jeff Bertsch

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

stuart(at)stuarthutchison
Guest

Posted: Tue Jun 27, 2017 6:06 am Post subject: Archer Antenna in RV4

I bought one each side for the wing tips of my Rocket Jeff, then learned that only one was practical.  In the end, neither was used due to building tip tanks, so both are available for sale.

Usually US$100+ each I believe, but I will part with one or other for US$60 each plus shipping.

Cheers, Stu

 	  Quote: 	
		  On 27 Jun 2017, at 23:36, Jeff Bertsch <noms1reqd(at)yahoo.com (noms1reqd(at)yahoo.com)> wrote:

96<![endif]--> Does anyone have experience installing an Archer Comm antenna in an RV4 wingtip?

I'm considering the Archer Model 1A and have concerns that it will fit properly.



ARCHER SPORT AIRCRAFT COM ANTENNA MODEL 1A

        <![endif]-->    <![endif]-->       

    <![endif]-->              ARCHER SPORT AIRCRAFT COM ANTENNA MODEL 1A  ARCHER SPORT AIRCRAFT COM ANTENNA MODEL 1A These antennas have been designed by Bob Archer from Torrance, CA uti...

             



Thanks.



Jeff Bertsch

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

jdubner

Joined: 17 Jul 2012
Posts: 35
Location: Independence, OR

Posted: Tue Jun 27, 2017 1:40 pm Post subject: Re: Archer Antenna in RV4

 	  Quote: 	
		  Does anyone have experience installing an Archer Comm antenna in an RV4 wingtip?

I'm considering the Archer Model 1A and have concerns that it will fit properly. 	


Jeff, I have the Archer NAV antenna mounted in my RV-8A's wingtip, which I believe is similar if not identical to that of the RV-4.  So taking your question literally, I would say it will fit OK.



However . . . you didn't ask but I advise against it because of the performance hit of the mostly horizontally-oriented antenna while VHF com requires vertical polarization.



When I ran out of space for vertically-polarized antennas on the bottom of my '8A, I mounted one on the bottom of a wing.  The ground plane is larger and there's plenty of separation for multiple antennas.



--

Joe

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Independence, OR

Kellym

Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ

Posted: Tue Jun 27, 2017 5:52 pm Post subject: Archer Antenna in RV4

I would agree. I have one Archer Nav antenna in each wing tip to serve 2 

navcoms. Performance is okay. While my -10 has big enough wing tips to 

do a vertical com, I wouldn't. A friend put one in -7 wingtip and it was 

good for maybe 20 miles until he had the plane painted with a metallic 

paint. Performance dropped to under 10 miles, so he abandoned and put 

antenna on a convenient wing inspection plate.

On 6/27/2017 2:40 PM, jdubner wrote:

 	  Quote: 	

> Does anyone have experience installing an Archer Comm antenna in an RV4 wingtip?

> I'm considering the Archer Model 1A and have concerns that it will fit properly.

 Jeff, I have the Archer NAVantenna mounted in my RV-8A's wingtip, which I believe is similar if not identical to that of the RV-4.  So taking your question literally, I would say it will fit OK.

 However . . . you didn't ask but I advise against it because of the performance hit of the mostly horizontally-oriented antenna while VHF com requires vertical polarization.

 When I ran out of space for vertically-polarized antennas on the bottom of my '8A, I mounted one on the bottom of a wing.  The ground plane is larger and there's plenty of separation for multiple antennas.

 --

 Joe

 --------

 RV-8A

 Independence, OR

 Read this topic online here:

 http://forums.matronics.com/viewtopic.php?p=470531#470531

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum