Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Fuel level calibration

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
west1m



Joined: 19 Apr 2014
Posts: 155
Location: Hastings, MN

PostPosted: Sun Sep 17, 2017 9:11 pm    Post subject: Fuel level calibration Reply with quote

My Firefly has an EIS panel that I added. To that I have added a fuel level sender. After initial install (I may have had to cut the probe, can't remember) and calibration the EIS Shows full at 200 empty at 0. The 200 seems odd but quite usable.
Recently it has lost calibration. I think it shows full at 50% and more. I haven't had time to try and recalibrate yet but my question is, with the power off etc, how does it maintain calibration? Is the calibration maintained in the sender or EIS? anyone else had trouble with this?


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
West1m
Hastings, MN
Back to top
View user's profile Send private message
lcottrell



Joined: 29 May 2006
Posts: 1494
Location: Jordan Valley, Or

PostPosted: Mon Sep 18, 2017 6:09 am    Post subject: Fuel level calibration Reply with quote

I believe I have a Princeton sender on mine. I called EIS and Sandy, who worked there at that time, told me the setting on the eis to use. Mine registers 5 gallons when full and the alarm is set to go off at 1. Nothing should change when the power is off. Its been so long ago, that of course I cannot remember the setting, so you might call them. I will try to see if I can find the documentation today.Larry
On Sun, Sep 17, 2017 at 11:11 PM, west1m <west1m(at)hotmail.com (west1m(at)hotmail.com)> wrote:
Quote:
--> Kolb-List message posted by: "west1m" <west1m(at)hotmail.com (west1m(at)hotmail.com)>

My Firefly has an EIS panel that I added. To that I have added a fuel level sender. After initial install (I may have had to cut the probe, can't remember) and calibration the EIS  Shows full at 200 empty at 0. The 200 seems odd but quite usable.
 Recently it has lost calibration. I think it shows full at 50% and more. I haven't had time to try and recalibrate yet but my question is, with the power off etc, how does it maintain calibration? Is the calibration maintained in the sender or EIS? anyone else had trouble with this?

--------
West1m
Hastings, MN




Read this topic online here:

http://forums.matronics.com/viewtopic.php?p=472972#472972






====================================
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Kolb-List
====================================
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
====================================
WIKI -
errer" target="_blank">http://wiki.matronics.com
====================================
b Site -
          -Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
====================================





--
The older I get, the less tolerant I am of those who are intolerant of others.


If you forward this email, or any part of it, please remove my email address before sending.


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
do not archive
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group