|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
ward.t(at)xtra.co.nz Guest
|
Posted: Sun Dec 17, 2017 12:23 pm Post subject: Aluminium Elbow |
|
|
EUROPA ALUMINIUM FUEL FILLER PIPE
*Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.
*The Aluminium pipe is bent to 55 degrees
*The pipe is supplied with added length so it can be cut to the desired length.
*Clean inside of pipe with a mild solvent or Motor gas.
*Cut fuel resistant rubber hose to join at both ends with Hose clamps.
Supplied by Tim Ward.
12 Waiwetu Street
Fendalton
Christchurch
New Zealand
Phone 0064 3 3515166
ward.t(at)xtra.co.nz
[img]cid:BD0E2CFA2D8B4A2F978FE2D6B20BF094(at)WaiwetuFamily[/img][img]cid:C185E8288DED4CA89CDFDCA98FF10D47(at)WaiwetuFamily[/img]
2 Hose Clamps
[img]cid:4B920650CC6A4CAEAB0134504314DD0E(at)WaiwetuFamily[/img]
Rubber Hose
2 Hose Clamps
[img]cid:9244B8C5AC6B4DD281DACBEB0AA68131(at)WaiwetuFamily[/img][img]cid:0A7D7EF6ED1045FD9467E74A39B5C2B1(at)WaiwetuFamily[/img][img]cid:968A9B8A7B5A456AAB703230DDF3536A(at)WaiwetuFamily[/img]
Fuel Tank inlet
[img]cid:AE0DC9DDE6D1473398290A179082550F(at)WaiwetuFamily[/img]
Aluminium Pipe
[img]cid:E0FF51E32E3244E8A3756F76E1650295(at)WaiwetuFamily[/img][img]cid:B39E5B6A1C9D4245AD5E8E878C3D68EE(at)WaiwetuFamily[/img][img]cid:A20B8644FB964A7B9478FBD9409BEFEA(at)WaiwetuFamily[/img][img]cid:5D3799F50E9F4E398273992882BA51BA(at)WaiwetuFamily[/img][img]cid:84B7D865E7714286A462657F8AC91C44(at)WaiwetuFamily[/img]
Fuel Tank
[img]cid:F6A2D93BAD2740258D5898FEE9FB3297(at)WaiwetuFamily[/img][img]cid:66E37AC3941C40E3864A38CAF92C37AF(at)WaiwetuFamily[/img][img]cid:AE0C13E531224BB7B8470078D62F8743(at)WaiwetuFamily[/img][img]cid:78D2A0E263614D9693F406FB7AAC7910(at)WaiwetuFamily[/img][img]cid:6E90D1CC31ED4131A866788C4E47CE2F(at)WaiwetuFamily[/img][img]cid:847F99BDC928462E8A67A9292CC6FEDB(at)WaiwetuFamily[/img][img]cid:298EDCBCF6DC44668A7C494235BD2AA8(at)WaiwetuFamily[/img] Plastic Fuel Filler
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
Description: |
|
Filesize: |
180 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
174 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
209 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
269 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
199 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
251 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
280 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
273 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
278 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
312 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
310 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
183 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
445 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
454 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
461 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
1.04 KB |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
393 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
740 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Filesize: |
980 Bytes |
Viewed: |
16401 Time(s) |
|
Description: |
|
Download |
Filename: |
Wardery.vcf |
Filesize: |
85 Bytes |
Downloaded: |
518 Time(s) |
|
|
Back to top |
|
|
peterz(at)zutrasoft.com Guest
|
Posted: Sun Dec 17, 2017 2:07 pm Post subject: Aluminium Elbow |
|
|
I'm in, although being in canada, I guess mailing it USPS would be the best way.
Please let me know the cost, and ill forward you my addess etc.
Cheers and thx,
Pete
A239
On Dec 17, 2017, at 3:22 PM, Tim Ward <ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)> wrote:
Quote: |
EUROPA ALUMINIUM FUEL FILLER PIPE
*Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.
*The Aluminium pipe is bent to 55 degrees
*The pipe is supplied with added length so it can be cut to the desired length.
*Clean inside of pipe with a mild solvent or Motor gas.
*Cut fuel resistant rubber hose to join at both ends with Hose clamps.
Supplied by Tim Ward.
12 Waiwetu Street
Fendalton
Christchurch
New Zealand
Phone 0064 3 3515166
ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)
<clip_image001[2].gif><clip_image002[2].gif>
2 Hose Clamps
<clip_image004[2].gif>
Rubber Hose
2 Hose Clamps
<clip_image005[2].gif><clip_image006[2].gif><clip_image007[2].gif>
Fuel Tank inlet
<clip_image008[2].gif>
Aluminium Pipe
<clip_image009[2].gif><clip_image010[2].gif><clip_image011[2].gif><clip_image012[2].gif><clip_image013[2].gif>
Fuel Tank
<clip_image014[2].gif><clip_image015[2].gif><clip_image016[2].gif><clip_image017[2].gif><clip_image018[2].gif><clip_image019[2].gif><clip_image020[3].gif> Plastic Fuel Filler
<Wardery.vcf>
|
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
alan.twigg775(at)gmail.co Guest
|
Posted: Sun Dec 17, 2017 11:15 pm Post subject: Aluminium Elbow |
|
|
Tim I do not need one just yet but put me down for one, I am sure I will need it in due course.
Alan Twigg
Motorglider kit 463
Oxfordshire UK
Sent from my iPad
On 17 Dec 2017, at 22:06, Pete <peterz(at)zutrasoft.com (peterz(at)zutrasoft.com)> wrote:
Quote: |
I'm in, although being in canada, I guess mailing it USPS would be the best way.
Please let me know the cost, and ill forward you my addess etc.
Cheers and thx,
Pete
A239
On Dec 17, 2017, at 3:22 PM, Tim Ward <ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)> wrote:
Quote: |
EUROPA ALUMINIUM FUEL FILLER PIPE
*Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.
*The Aluminium pipe is bent to 55 degrees
*The pipe is supplied with added length so it can be cut to the desired length.
*Clean inside of pipe with a mild solvent or Motor gas.
*Cut fuel resistant rubber hose to join at both ends with Hose clamps.
Supplied by Tim Ward.
12 Waiwetu Street
Fendalton
Christchurch
New Zealand
Phone 0064 3 3515166
ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)
<clip_image001[2].gif><clip_image002[2].gif>
2 Hose Clamps
<clip_image004[2].gif>
Rubber Hose
2 Hose Clamps
<clip_image005[2].gif><clip_image006[2].gif><clip_image007[2].gif>
Fuel Tank inlet
<clip_image008[2].gif>
Aluminium Pipe
<clip_image009[2].gif><clip_image010[2].gif><clip_image011[2].gif><clip_image012[2].gif><clip_image013[2].gif>
Fuel Tank
<clip_image014[2].gif><clip_image015[2].gif><clip_image016[2].gif><clip_image017[2].gif><clip_image018[2].gif><clip_image019[2].gif><clip_image020[3].gif> Plastic Fuel Filler
<Wardery.vcf>
|
|
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
carlp101
Joined: 07 Mar 2016 Posts: 120
|
Posted: Mon Dec 18, 2017 3:03 am Post subject: Re: Aluminium Elbow |
|
|
Here is a pic of the elbow in place.
Regards
Carl
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
Description: |
|
Filesize: |
1.18 MB |
Viewed: |
16373 Time(s) |
|
Last edited by carlp101 on Mon Dec 18, 2017 3:09 am; edited 1 time in total |
|
Back to top |
|
|
Burrilla
Joined: 25 Apr 2015 Posts: 187
|
Posted: Mon Dec 18, 2017 3:07 am Post subject: Re: Aluminium Elbow |
|
|
carlp101 wrote: | Here is a pic of the elbow in place.
Regards
Carl |
No Picture?
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
Burrilla
Joined: 25 Apr 2015 Posts: 187
|
Posted: Mon Dec 18, 2017 3:11 am Post subject: Re: Aluminium Elbow |
|
|
I'm interested please.
Although subject to the LAA Standard Mod outcome obviously.
Alan Burrill
G-CDPY
ward.t(at)xtra.co.nz wrote: | EUROPA ALUMINIUM FUEL FILLER PIPE
*Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.
*The Aluminium pipe is bent to 55 degrees
*The pipe is supplied with added length so it can be cut to the desired length.
*Clean inside of pipe with a mild solvent or Motor gas.
*Cut fuel resistant rubber hose to join at both ends with Hose clamps.
Supplied by Tim Ward.
12 Waiwetu Street
Fendalton
Christchurch
New Zealand
Phone 0064 3 3515166
ward.t(at)xtra.co.nz
[img]cid:BD0E2CFA2D8B4A2F978FE2D6B20BF094(at)WaiwetuFamily[/img][img]cid:C185E8288DED4CA89CDFDCA98FF10D47(at)WaiwetuFamily[/img]
2 Hose Clamps
[img]cid:4B920650CC6A4CAEAB0134504314DD0E(at)WaiwetuFamily[/img]
Rubber Hose
2 Hose Clamps
|
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
ward.t(at)xtra.co.nz Guest
|
Posted: Mon Dec 18, 2017 9:50 am Post subject: Aluminium Elbow |
|
|
Hi there,
The elbow is not welded to create angle. It is bent at the manufacturing stage to the required angle. It is long enough to be cut to fit.
Cheers,
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t(at)xtra.co.nz
Mob +64 210640221
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
dpark748(at)me.com Guest
|
Posted: Mon Dec 18, 2017 9:56 am Post subject: Aluminium Elbow |
|
|
Put me down for one pending new Mod. Just in case my installation is not approved with welded alloy angle?
Dave Park
Quote: | On 18 Dec 2017, at 17:49, Tim Ward <ward.t(at)xtra.co.nz> wrote:
Hi there,
The elbow is not welded to create angle. It is bent at the manufacturing stage to the required angle. It is long enough to be cut to fit.
Cheers,
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t(at)xtra.co.nz
Mob +64 210640221
> On 19/12/2017, at 12:07 AM, Burrilla <alanb(at)dpy01.co.uk> wrote:
>
>
>
>
> carlp101 wrote:
>> Here is a pic of the elbow in place.
>>
>> Regards
>> Carl
>
>
> No Picture?
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=476553#476553
>
>
>
>
>
>
>
>
>
|
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
ward.t(at)xtra.co.nz Guest
|
Posted: Mon Dec 18, 2017 10:03 am Post subject: Aluminium Elbow |
|
|
Pete,I also fly to Vancouver so will post it from there if it goes ahead.
Cheers,
Tim
Tim Ward12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)
Mob +64 210640221
On 18/12/2017, at 11:06 AM, Pete <peterz(at)zutrasoft.com (peterz(at)zutrasoft.com)> wrote:
Quote: |
I'm in, although being in canada, I guess mailing it USPS would be the best way.
Please let me know the cost, and ill forward you my addess etc.
Cheers and thx,
Pete
A239
On Dec 17, 2017, at 3:22 PM, Tim Ward <ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)> wrote:
Quote: |
EUROPA ALUMINIUM FUEL FILLER PIPE
*Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.
*The Aluminium pipe is bent to 55 degrees
*The pipe is supplied with added length so it can be cut to the desired length.
*Clean inside of pipe with a mild solvent or Motor gas.
*Cut fuel resistant rubber hose to join at both ends with Hose clamps.
Supplied by Tim Ward.
12 Waiwetu Street
Fendalton
Christchurch
New Zealand
Phone 0064 3 3515166
ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)
<clip_image001[2].gif><clip_image002[2].gif>
2 Hose Clamps
<clip_image004[2].gif>
Rubber Hose
2 Hose Clamps
<clip_image005[2].gif><clip_image006[2].gif><clip_image007[2].gif>
Fuel Tank inlet
<clip_image008[2].gif>
Aluminium Pipe
<clip_image009[2].gif><clip_image010[2].gif><clip_image011[2].gif><clip_image012[2].gif><clip_image013[2].gif>
Fuel Tank
<clip_image014[2].gif><clip_image015[2].gif><clip_image016[2].gif><clip_image017[2].gif><clip_image018[2].gif><clip_image019[2].gif><clip_image020[3].gif> Plastic Fuel Filler
<Wardery.vcf>
|
|
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
Kelvin Weston
Joined: 14 Apr 2010 Posts: 90 Location: Hampshire, UK
|
Posted: Mon Dec 18, 2017 11:31 am Post subject: Re: Aluminium Elbow |
|
|
Hi All
Damn! Just fitted Tim's pipe and now it looks like I will have to remove and replace the rubber hose with something else, yet to be decided by the LAA.
Two steps forward and one back!
Picture attached - the pipe supplied by Tim is bent not welded.
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
Description: |
|
Filesize: |
53.83 KB |
Viewed: |
16300 Time(s) |
|
_________________ Regards
Kelv Weston
Kit 497
kelv@kdweston.co.uk |
|
Back to top |
|
|
gilles.thesee(at)free.fr Guest
|
Posted: Mon Dec 18, 2017 11:53 am Post subject: Aluminium Elbow |
|
|
Le 18/12/2017 20:31, Kelvin Weston a crit:
Hi Kevin,
Out of curiosity, what are those lines visible in the composite, I suppose it's not a variety of peel ply ?
--
Best regards,
Gilles
http://contrails.free.fr
http://lapierre.skunkworks.free.fr
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
ward.t(at)xtra.co.nz Guest
|
Posted: Mon Dec 18, 2017 11:59 am Post subject: Aluminium Elbow |
|
|
Hi All,
Here is a LAA Mod Approval for this Aircraft only. I think it must be the
old "Classic" fuel system?
Hope this attachment comes through.
Cheers,
Tim
Tim Ward,
12 Waiwetu Street,
Fendalton,
Christchurch 8052
New Zealand
Ph; 03 3515166
Mob; 0210640221
email; ward.t(at)xtra.co.nz
--
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
Description: |
|
Download |
Filename: |
Europa_Aluminum_Pipe_UKCAA_MOD_APPROVAL.pdf |
Filesize: |
328.83 KB |
Downloaded: |
441 Time(s) |
|
|
Back to top |
|
|
Dave Disney
Joined: 16 Aug 2010 Posts: 54 Location: Weston-Super-Mare
|
Posted: Mon Dec 18, 2017 1:22 pm Post subject: Re: Aluminium Elbow |
|
|
Hello Tim,
I would like to join the list of people who want an aluminium elbow, looks like you might need a suitcase full of them when you visit the UK.
I'll supply my details in a PM.
Regards
Dave
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
ward.t(at)xtra.co.nz Guest
|
Posted: Mon Dec 18, 2017 2:37 pm Post subject: Aluminium Elbow |
|
|
Hi Dave,
Ok I will put you on the list.
Will keep in touch.
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t(at)xtra.co.nz
Mob +64 210640221
Quote: | On 19/12/2017, at 10:22 AM, Dave Disney <davedisney(at)yahoo.co.uk> wrote:
Hello Tim,
I would like to join the list of people who want an aluminium elbow, looks like you might need a suitcase full of them when you visit the UK.
I'll supply my details in a PM.
Regards
Dave
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=476582#476582
|
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
Kelvin Weston
Joined: 14 Apr 2010 Posts: 90 Location: Hampshire, UK
|
Posted: Mon Dec 18, 2017 2:41 pm Post subject: Re: Aluminium Elbow |
|
|
Hi Gilles
No, it's not peel ply. I think it is a tracer thread woven into the glass fabric to ensure the glass is laid up in the correct orientation during the moulding lay-up.
Here is a picture of the inside of the rear fuselage.
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
Description: |
|
Filesize: |
50.63 KB |
Viewed: |
16266 Time(s) |
|
_________________ Regards
Kelv Weston
Kit 497
kelv@kdweston.co.uk |
|
Back to top |
|
|
Kelvin Weston
Joined: 14 Apr 2010 Posts: 90 Location: Hampshire, UK
|
Posted: Mon Dec 18, 2017 2:45 pm Post subject: Re: Aluminium Elbow |
|
|
Hi Gilles
No, it's not peel ply. I think it is a tracer thread woven into the glass fabric to ensure the glass is laid up in the correct orientation during the moulding lay-up.
Here is a picture of the inside of the rear fuselage.
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
Description: |
|
Filesize: |
50.63 KB |
Viewed: |
16265 Time(s) |
|
_________________ Regards
Kelv Weston
Kit 497
kelv@kdweston.co.uk |
|
Back to top |
|
|
ward.t(at)xtra.co.nz Guest
|
Posted: Mon Dec 18, 2017 2:47 pm Post subject: Aluminium Elbow |
|
|
Hi All,
Just been down to see the manufacturer of the elbow. They said there would be no problem in setting up the jig again. They are going to come back with a price for 10 and 20 pipes.
Will keep you informed. Will not give the go ahead until we have enough orders and the LAA Mod. approval is through. Is has already been approved with one builder in 2011 but I am sure that was the Classic Fuel System with the centre roof inlet. However no real difference.
Cheers,
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t(at)xtra.co.nz
Mob +64 210640221
Quote: | On 19/12/2017, at 11:35 AM, Tim Ward <ward.t(at)xtra.co.nz> wrote:
Hi Dave,
Ok I will put you on the list.
Will keep in touch.
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t(at)xtra.co.nz
Mob +64 210640221
> On 19/12/2017, at 10:22 AM, Dave Disney <davedisney(at)yahoo.co.uk> wrote:
>
>
>
> Hello Tim,
>
> I would like to join the list of people who want an aluminium elbow, looks like you might need a suitcase full of them when you visit the UK.
>
> I'll supply my details in a PM.
>
> Regards
>
> Dave
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=476582#476582
>
>
>
>
>
>
>
>
>
|
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
pete(at)lawless.info Guest
|
Posted: Mon Dec 18, 2017 2:47 pm Post subject: Aluminium Elbow |
|
|
Hi All
This 13070 is for the Classic long long rubber pipe. Watch this space
for shortly to be released Standard Mod SM 13070.
Pete
G-RMAC Classic # 109
On 18/12/17 19:58, Tim Ward wrote:
[quote]
Hi All,
Here is a LAA Mod Approval for this Aircraft only. I think it must be
the old "Classic" fuel system?
Hope this attachment comes through.
Cheers,
Tim
Tim Ward,
12 Waiwetu Street,
Fendalton,
Christchurch 8052
New Zealand
Ph; 03 3515166
Mob; 0210640221
email; ward.t(at)xtra.co.nz
--
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
Matt Dovey
Joined: 13 May 2017 Posts: 48 Location: st albans, england
|
Posted: Mon Dec 18, 2017 3:02 pm Post subject: Re: Aluminium Elbow |
|
|
Not sure if I need one bit put me down any way
Matt
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
hpreusser(at)vtxmail.ch Guest
|
Posted: Mon Dec 18, 2017 10:42 pm Post subject: Aluminium Elbow |
|
|
Hi Tim
I need one, can you pur me on the list?
Hans-Peter
Kit 498, still building
Hans-Peter Reusser
Spiezbergstrasse 13
3700 Spiez, Switzerland
Von meinem iPad gesendet
[quote] Am 18.12.2017 um 19:02 schrieb Tim Ward <ward.t(at)xtra.co.nz>:
Pete,
I also fly to Vancouver so will post it from there if it goes ahead.
Cheers,
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
ward.t(at)xtra.co.nz
Mob +64 210640221
> On 18/12/2017, at 11:06 AM, Pete <peterz(at)zutrasoft.com> wrote:
>
> I'm in, although being in canada, I guess mailing it USPS would be the best way.
>
> Please let me know the cost, and ill forward you my addess etc.
>
> Cheers and thx,
> Pete
> A239
>
>> On Dec 17, 2017, at 3:22 PM, Tim Ward <ward.t(at)xtra.co.nz> wrote:
>>
>> EUROPA ALUMINIUM FUEL FILLER PIPE
>>
>> *Aluminium pipe is used to join the roto-polyurethane “cobra” fuel inlet tube to the fuel tank inlet.
>>
>> *The Aluminium pipe is bent to 55 degrees
>>
>> *The pipe is supplied with added length so it can be cut to the desired length.
>>
>> *Clean inside of pipe with a mild solvent or Motor gas.
>>
>> *Cut fuel resistant rubber hose to join at both ends with Hose clamps
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|