Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Electronic Ignition spark advance signal boost CORRECTIO

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
nuckolls.bob(at)aeroelect
Guest





PostPosted: Thu Jan 11, 2018 8:19 am    Post subject: Electronic Ignition spark advance signal boost CORRECTIO Reply with quote

At 02:02 AM 1/11/2018, you wrote:
Quote:
--> AeroElectric-List message posted by: "Airdog77" <Airdog77(at)gmail.com>

Bob,

I should have been a bit clearer myself on the ground wire off that unit since --you're gonna love this-- it's not on the diagram!

Yes, there is actually a separate ground wire that is not depicted on that diagram, and again, for some reason it's quite robust (~12-14AWG). So I measured the distance from the case that I tied into that big ground wire with my 22AWG lead for the AD626 (-) input at 4.5 inches.

Sorry for the confusion and thanks for the help!

That may be the ground return for the
9A coil charging current cited in the installation
manual. For your purposes, tying AD626(-) input
to the same airframe ground as this wire may
not be a problem but after you've got the
system up and running, you may observe
behaviors that prompt further inquiry and
perhaps relocation of the instrumentation
ground. Given the short length, you're
probably going to be okay.



Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Airdog77



Joined: 24 Nov 2013
Posts: 80
Location: Northern Virginia

PostPosted: Thu Jan 11, 2018 10:11 am    Post subject: Re: Electronic Ignition spark advance signal boost CORRECT Reply with quote

Bob,

I'll take note of that and watch it during future testing.

Thanks again!
Wade


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Airdog
Wade Parton
Building Long-EZ N916WP
www.longezpush.com
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group