Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Constructing an automatic RCA video camera feed splitter

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
nuckolls.bob(at)aeroelect
Guest
PostPosted: Sun Jan 28, 2018 11:55 am    Post subject: Constructing an automatic RCA video camera feed splitter Reply with quote
At 06:00 PM 12/4/2017, you wrote:
Quote:
--> AeroElectric-List message posted by: "Eric Page" <edpav8r(at)yahoo.com>


nuckolls.bob(at)aeroelect wrote:
> A D-sub housing I've found quite useful is the 956 series devices from NorComp. They have an inside height of 0.570 and will allow you to socket a chip on the far end . . . the board deflects off centerline by about 0.050.

Bob, your timing is impeccable. I turned on the computer to order some parts and saw your post. I'll get the 956-series backshell. I was looking at NorComp's 983-series, but yours looks nearly identical for interior volume and is 1/4 the cost.

Once I have the parts I'll do a quick cardboard template of the PCB before I order those, to be sure they'll fit.

the optimum board size is 1.175 x 0.630 for the 15-pin
shells. Let me know what you find for 25-pin . . . if you
need to go that big.




Bob . . .

- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group