Matronics Email Lists :: View topic - Dynon Pitot Heat Warning with MGL EFIS

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Dynon Pitot Heat Warning with MGL EFIS

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

art(at)zemon.name
Guest

Posted: Mon Mar 12, 2018 4:06 am Post subject: Dynon Pitot Heat Warning with MGL EFIS

Folks,

I am installing a Dynon heated pitot tube. The controller has a pin which gets grounded if the heater is turned on and fails. This is supposed to drive a warning lamp. See "pitot heat warn" on the attached diagram. 

I want to replace the pitot heat warn lamp with an indicator on my MGL EFIS. The EFIS has eight analog inputs (see A1 through A8 on page 6 of the attached iBOX V1 installation manual) and also has four balanced analog inputs (see 1+,1- through 4+,4-) on page 7.

This would be easy for me if INST-4-G from the Dynon controller was either grounded or at some positive voltage. But if I understand correctly, that wire is either grounded or open. How do I hook this to my EFIS?

Thanks, 

    -- Art Z. 



-- 

https://CheerfulCurmudgeon.com/"If I am not for myself, who is for me? And if I am only for myself, what am I? And if not now, when?" Hillel

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

pitot.pdf

Description:

Download

Filename:

pitot.pdf

Filesize:

28.13 KB

Downloaded:

449 Time(s)

iBOX_V1_installation_manual.pdf

Description:

Download

Filename:

iBOX_V1_installation_manual.pdf

Filesize:

250.25 KB

Downloaded:

506 Time(s)

user9253

Joined: 28 Mar 2008
Posts: 1925
Location: Riley TWP Michigan

Posted: Mon Mar 12, 2018 4:59 am Post subject: Re: Dynon Pitot Heat Warning with MGL EFIS

Connect a pull-up resistor, perhaps 1K Ω or more, between a positive source and the Dynon alarm wire.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Joe Gores

art(at)zemon.name
Guest

Posted: Mon Mar 12, 2018 5:33 am Post subject: Dynon Pitot Heat Warning with MGL EFIS

Joe,

What do I connect to the EFIS?

    -- Art Z.



On Mon, Mar 12, 2018 at 7:59 AM, user9253 <fransew(at)gmail.com (fransew(at)gmail.com)> wrote:

 	  Quote: 	
		  --> AeroElectric-List message posted by: "user9253" <fransew(at)gmail.com (fransew(at)gmail.com)>

 

 Connect a pull-up resistor, perhaps 1K Ω or more, between a positive source and the Dynon alarm wire. 	


-- 

https://CheerfulCurmudgeon.com/"If I am not for myself, who is for me? And if I am only for myself, what am I? And if not now, when?" Hillel

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

user9253

Joined: 28 Mar 2008
Posts: 1925
Location: Riley TWP Michigan

Posted: Mon Mar 12, 2018 7:11 am Post subject: Re: Dynon Pitot Heat Warning with MGL EFIS

A picture is worth a thousand words.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

PITOT ALARM.jpg

Description:

Filesize:

81.66 KB

Viewed:

6919 Time(s)

_________________
Joe Gores

art(at)zemon.name
Guest

Posted: Mon Mar 12, 2018 8:13 am Post subject: Dynon Pitot Heat Warning with MGL EFIS

Joe,

Got it. That'll work. Thank you.

    -- Art Z.



On Mon, Mar 12, 2018 at 10:11 AM, user9253 <fransew(at)gmail.com (fransew(at)gmail.com)> wrote:

 	  Quote: 	
		  --> AeroElectric-List message posted by: "user9253" <fransew(at)gmail.com (fransew(at)gmail.com)>

 

 A picture is worth a thousand words. 	


-- 

https://CheerfulCurmudgeon.com/"If I am not for myself, who is for me? And if I am only for myself, what am I? And if not now, when?" Hillel

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

user9253

Joined: 28 Mar 2008
Posts: 1925
Location: Riley TWP Michigan

Posted: Mon Mar 12, 2018 12:46 pm Post subject: Re: Dynon Pitot Heat Warning with MGL EFIS

I would try it without the pull-up resistor first. It might not be needed.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Joe Gores

BARRY CHECK 6

Joined: 15 Mar 2011
Posts: 738

Posted: Mon Mar 12, 2018 2:02 pm Post subject: Dynon Pitot Heat Warning with MGL EFIS

How would you do that if the reference is ground?



On Monday, March 12, 2018, user9253 <fransew(at)gmail.com (fransew(at)gmail.com)> wrote:

 	  Quote: 	
		  --> AeroElectric-List message posted by: "user9253" <fransew(at)gmail.com (fransew(at)gmail.com)>

 

 I would try it without the pull-up resistor first.  It might not be needed.

 

 --------

 Joe Gores

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=478626#478626

 

 

 

 

 

 

 ====================================

  -

 Electric-List" target="_blank">http://www.matronics.com/Navigator?AeroElectric-List

 ====================================

  FORUMS -

 _blank">http://forums.matronics.com

 ====================================

 WIKI -

 lank">http://wiki.matronics.com

 ====================================

 b Site -

           -Matt Dralle, List Admin.

 target="_blank">http://www.matronics.com/contribution

 ====================================

 

 

 

 	


-- 

Barry

"Chop'd Liver"

If you wash your hands before you go to the bathroom you may have the makings of a Crew Chief.

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum