Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Fwd: 912 for Sale

Matronics Email Lists Forum Index -> Pulsar-List

View previous topic :: View next topic

Author Message

bernard.wilder2(at)gmail.
Guest

Posted: Mon Aug 27, 2018 1:06 pm Post subject: Fwd: 912 for Sale

When I sent this out I got a funny notice from Google.Â 

So maybe it didn't go out.. Forgive the duplicate if it did.

Bernie Wilder



---------- Forwarded message ---------

From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>

Date: Sun, Aug 26, 2018 at 2:35 PM

Subject: 912 for Sale

To: Pulsar Net <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)>



After my last flight on my 85th B'day I took the wings off my Pulsar and took it home.

Couldn't bring myself around to sell it so I just enjoyed looking at it for over a year.

Needed an excuse for not selling her so I have decided to electrify her.Â  Big slow project but what to hellÂ  ! ! ! !Â 

I pulled the 912 out and set it on a bench where I can turn her over regularly.

So there she sits much like she looked in the Pulsar and I haven't the faintest idea as to how much to ask for it.

Mufflers, manifoldÂ  and carbs still attached as are all the EIS sensors.Â  It will be sold with sump, radiators, voltage regulator, EIS instrument, starter solenoid, oil thermostat,Â  fuel selector valve, exhaust pipes, air cleaners, electric fuel pump, fuel filter, ETC.

Has 700 hours on her.Â  Always ran great. Last year or so it started hard so I think a buyer should count of replacing the ignition units.Â 

Let's take a vote.Â  How much is she worth ? ? ? ?Â 

Bernie WilderÂ

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

ronko(at)att.net
Guest

Posted: Mon Aug 27, 2018 1:18 pm Post subject: Fwd: 912 for Sale

Bernie,

I also had trouble the last email I sent to the group and had to send it a second time, which the 2nd time it did get sent out.



Ronko

       From: Bernard Wilder <bernard.wilder2(at)gmail.com>

 To: Pulsar Net <pulsar-list(at)matronics.com> 

 Sent: Monday, August 27, 2018 4:06 PM

 Subject: Fwd: 912 for Sale

  

 

When I sent this out I got a funny notice from Google. 



So maybe it didn't go out.. Forgive the duplicate if it did.



Bernie Wilder

---------- Forwarded message ---------From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>Date: Sun, Aug 26, 2018 at 2:35 PMSubject: 912 for SaleTo: Pulsar Net <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)>

After my last flight on my 85th B'day I took the wings off my Pulsar and took it home.



Couldn't bring myself around to sell it so I just enjoyed looking at it for over a year.



Needed an excuse for not selling her so I have decided to electrify her.  Big slow project but what to hell  ! ! ! ! 



I pulled the 912 out and set it on a bench where I can turn her over regularly.



So there she sits much like she looked in the Pulsar and I haven't the faintest idea as to how much to ask for it.



Mufflers, manifold  and carbs still attached as are all the EIS sensors.  It will be sold with sump, radiators, voltage regulator, EIS instrument, starter solenoid, oil thermostat,  fuel selector valve, exhaust pipes, air cleaners, electric fuel pump, fuel filter, ETC.



Has 700 hours on her.  Always ran great. Last year or so it started hard so I think a buyer should count of replacing the ignition units. 



Let's take a vote.  How much is she worth ? ? ? ? 



Bernie Wilder

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

rwilhelm25(at)gmail.com
Guest

Posted: Mon Aug 27, 2018 1:19 pm Post subject: Fwd: 912 for Sale

Got it hear, Bernie

 

Sent from Mail for Windows 10

 

From: Bernard Wilder (bernard.wilder2(at)gmail.com)

Sent: Monday, August 27, 2018 8:52 AM

To: Pulsar Net (pulsar-list(at)matronics.com)

Subject: Fwd: 912 for Sale



 

When I sent this out I got a funny notice from Google. 



 



So maybe it didn't go out.. Forgive the duplicate if it did.



 



Bernie Wilder



 

---------- Forwarded message ---------

From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>

Date: Sun, Aug 26, 2018 at 2:35 PM

Subject: 912 for Sale

To: Pulsar Net <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)>



 

After my last flight on my 85th B'day I took the wings off my Pulsar and took it home.



 



Couldn't bring myself around to sell it so I just enjoyed looking at it for over a year.



 



Needed an excuse for not selling her so I have decided to electrify her.  Big slow project but what to hell  ! ! ! ! 



 



I pulled the 912 out and set it on a bench where I can turn her over regularly.



 



So there she sits much like she looked in the Pulsar and I haven't the faintest idea as to how much to ask for it.



 



Mufflers, manifold  and carbs still attached as are all the EIS sensors.  It will be sold with sump, radiators, voltage regulator, EIS instrument, starter solenoid, oil thermostat,  fuel selector valve, exhaust pipes, air cleaners, electric fuel pump, fuel filter, ETC.



 



Has 700 hours on her.  Always ran great. Last year or so it started hard so I think a buyer should count of replacing the ignition units. 



 



Let's take a vote.  How much is she worth ? ? ? ? 



 





Bernie Wilder

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

otto(at)otamat.com
Guest

Posted: Tue Aug 28, 2018 2:24 am Post subject: Fwd: 912 for Sale

Hi, does anyone know the Pulsar III flap deflections for take-off and landing?

I looked in the build manual and could not find it.

Thanks

otto

OK-NAZ 20

On Mon, 27 Aug 2018 at 23:18, Ronald Koval <ronko(at)att.net (ronko(at)att.net)> wrote:



 	  Quote: 	
		  Bernie,

I also had trouble the last email I sent to the group and had to send it a second time, which the 2nd time it did get sent out.



Ronko

       From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>

 To: Pulsar Net <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)> 

 Sent: Monday, August 27, 2018 4:06 PM

 Subject: Fwd: 912 for Sale

  

 

When I sent this out I got a funny notice from Google.Â 



So maybe it didn't go out.. Forgive the duplicate if it did.



Bernie Wilder

---------- Forwarded message ---------From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>Date: Sun, Aug 26, 2018 at 2:35 PMSubject: 912 for SaleTo: Pulsar Net <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)>

After my last flight on my 85th B'day I took the wings off my Pulsar and took it home.



Couldn't bring myself around to sell it so I just enjoyed looking at it for over a year.



Needed an excuse for not selling her so I have decided to electrify her.Â  Big slow project but what to hellÂ  ! ! ! !Â 



I pulled the 912 out and set it on a bench where I can turn her over regularly.



So there she sits much like she looked in the Pulsar and I haven't the faintest idea as to how much to ask for it.



Mufflers, manifoldÂ  and carbs still attached as are all the EIS sensors.Â  It will be sold with sump, radiators, voltage regulator, EIS instrument, starter solenoid, oil thermostat,Â  fuel selector valve, exhaust pipes, air cleaners, electric fuel pump, fuel filter, ETC.



Has 700 hours on her.Â  Always ran great. Last year or so it started hard so I think a buyer should count of replacing the ignition units.Â 



Let's take a vote.Â  How much is she worth ? ? ? ?Â 



Bernie WilderÂ

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

cyard52306(at)aol.com
Guest

Posted: Tue Aug 28, 2018 3:19 am Post subject: Fwd: 912 for Sale

OTTO 

Most GA are Take off 10 deg and landing is as required max on my XP was 35 deg however the linkages were light weight and could be deflected by wind pressure and  reduce the actual flap to 25deg Still more than enough most important was get your speed right on finals

CY

Sent from my Samsung device



-------- Original message --------

From: Otto Souta <otto(at)otamat.com> 

Date: 28/08/2018  11:24  (GMT+00:00) 

To: pulsar-list(at)matronics.com 

Subject: Re: Pulsar-List: Fwd: 912 for Sale 



Hi, does anyone know the Pulsar III flap deflections for take-off and landing?

I looked in the build manual and could not find it.

Thanks

otto

OK-NAZ 20

On Mon, 27 Aug 2018 at 23:18, Ronald Koval <ronko(at)att.net (ronko(at)att.net)> wrote:



 	  Quote: 	
		  Bernie,

I also had trouble the last email I sent to the group and had to send it a second time, which the 2nd time it did get sent out.



Ronko

       From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>

 To: Pulsar Net <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)> 

 Sent: Monday, August 27, 2018 4:06 PM

 Subject: Pulsar-List: Fwd: 912 for Sale

  

 

When I sent this out I got a funny notice from Google. 



So maybe it didn't go out.. Forgive the duplicate if it did.



Bernie Wilder

---------- Forwarded message ---------From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>Date: Sun, Aug 26, 2018 at 2:35 PMSubject: 912 for SaleTo: Pulsar Net <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)>

After my last flight on my 85th B'day I took the wings off my Pulsar and took it home.



Couldn't bring myself around to sell it so I just enjoyed looking at it for over a year.



Needed an excuse for not selling her so I have decided to electrify her.  Big slow project but what to hell  ! ! ! ! 



I pulled the 912 out and set it on a bench where I can turn her over regularly.



So there she sits much like she looked in the Pulsar and I haven't the faintest idea as to how much to ask for it.



Mufflers, manifold  and carbs still attached as are all the EIS sensors.  It will be sold with sump, radiators, voltage regulator, EIS instrument, starter solenoid, oil thermostat,  fuel selector valve, exhaust pipes, air cleaners, electric fuel pump, fuel filter, ETC.



Has 700 hours on her.  Always ran great. Last year or so it started hard so I think a buyer should count of replacing the ignition units. 



Let's take a vote.  How much is she worth ? ? ? ? 



Bernie Wilder

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

rwilhelm(at)dc.rr.com
Guest

Posted: Tue Aug 28, 2018 5:58 am Post subject: Fwd: 912 for Sale

With my III I never needed flaps on take off. That was with a 3300 engine.



I used full flaps on landing to have a better view of the runway.



Yes the linkage is not solid so if you get 25 degrees at 100 mph your lucky

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

lwheat2083

Joined: 03 Jan 2014
Posts: 33
Location: Moses Lake, Washington

Posted: Tue Aug 28, 2018 11:08 am Post subject: Fwd: 912 for Sale

10 degrees at takeoff, full or less for landing. 	  Quote: 	
		  On Aug 28, 2018, at 3:24 AM, Otto Souta <otto(at)otamat.com (otto(at)otamat.com)> wrote:

Hi, does anyone know the Pulsar III flap deflections for take-off and landing?

I looked in the build manual and could not find it.

Thanks

otto

OK-NAZ 20



On Mon, 27 Aug 2018 at 23:18, Ronald Koval <ronko(at)att.net (ronko(at)att.net)> wrote:

 	  Quote: 	
		  Bernie,



I also had trouble the last email I sent to the group and had to send it a second time, which the 2nd time it did get sent out.

Ronko

       From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)> To: Pulsar Net <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)>  Sent: Monday, August 27, 2018 4:06 PM Subject: Fwd: 912 for Sale  

 When I sent this out I got a funny notice from Google. 



So maybe it didn't go out.. Forgive the duplicate if it did.



Bernie Wilder

---------- Forwarded message ---------From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>Date: Sun, Aug 26, 2018 at 2:35 PMSubject: 912 for SaleTo: Pulsar Net <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)>

After my last flight on my 85th B'day I took the wings off my Pulsar and took it home.



Couldn't bring myself around to sell it so I just enjoyed looking at it for over a year.



Needed an excuse for not selling her so I have decided to electrify her.  Big slow project but what to hell  ! ! ! ! 



I pulled the 912 out and set it on a bench where I can turn her over regularly.



So there she sits much like she looked in the Pulsar and I haven't the faintest idea as to how much to ask for it.



Mufflers, manifold  and carbs still attached as are all the EIS sensors.  It will be sold with sump, radiators, voltage regulator, EIS instrument, starter solenoid, oil thermostat,  fuel selector valve, exhaust pipes, air cleaners, electric fuel pump, fuel filter, ETC.



Has 700 hours on her.  Always ran great. Last year or so it started hard so I think a buyer should count of replacing the ignition units. 



Let's take a vote.  How much is she worth ? ? ? ? 



Bernie Wilder

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

otas

Joined: 10 Jul 2014
Posts: 6

Posted: Tue Aug 28, 2018 10:49 pm Post subject: Fwd: 912 for Sale

Thanks, what is the max flap deflection in degrees?



On Tue, 28 Aug 2018, 21:08 Larry Wheat, <lwheat2083(at)gmail.com (lwheat2083(at)gmail.com)> wrote:



 	  Quote: 	
		  10 degrees at takeoff, full or less for landing.



 	  Quote: 	
		  On Aug 28, 2018, at 3:24 AM, Otto Souta <otto(at)otamat.com (otto(at)otamat.com)> wrote:

Hi, does anyone know the Pulsar III flap deflections for take-off and landing?

I looked in the build manual and could not find it.

Thanks

otto

OK-NAZ 20

On Mon, 27 Aug 2018 at 23:18, Ronald Koval <ronko(at)att.net (ronko(at)att.net)> wrote:



 	  Quote: 	
		  Bernie,

I also had trouble the last email I sent to the group and had to send it a second time, which the 2nd time it did get sent out.



Ronko

       From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>

 To: Pulsar Net <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)> 

 Sent: Monday, August 27, 2018 4:06 PM

 Subject: Fwd: 912 for Sale

  

 

When I sent this out I got a funny notice from Google.Â 



So maybe it didn't go out.. Forgive the duplicate if it did.



Bernie Wilder

---------- Forwarded message ---------From: Bernard Wilder <bernard.wilder2(at)gmail.com (bernard.wilder2(at)gmail.com)>Date: Sun, Aug 26, 2018 at 2:35 PMSubject: 912 for SaleTo: Pulsar Net <pulsar-list(at)matronics.com (pulsar-list(at)matronics.com)>

After my last flight on my 85th B'day I took the wings off my Pulsar and took it home.



Couldn't bring myself around to sell it so I just enjoyed looking at it for over a year.



Needed an excuse for not selling her so I have decided to electrify her.Â  Big slow project but what to hellÂ  ! ! ! !Â 



I pulled the 912 out and set it on a bench where I can turn her over regularly.



So there she sits much like she looked in the Pulsar and I haven't the faintest idea as to how much to ask for it.



Mufflers, manifoldÂ  and carbs still attached as are all the EIS sensors.Â  It will be sold with sump, radiators, voltage regulator, EIS instrument, starter solenoid, oil thermostat,Â  fuel selector valve, exhaust pipes, air cleaners, ele7810033390608955594yui_3_16_0_ym19_1_1535403429690_15102">

Has 700 hours on her.Â  Always ran great. Last year or so it started hard so I think a buyer should count of replacing the ignition units.Â 



Let's take a vote.Â  How much is she worth ? ? ? ?Â 



Bernie WilderÂ

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

_________________
Pulsar III, R914, Ivoprop Magnum

Display posts from previous:

	Matronics Email Lists Forum Index -> Pulsar-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum