Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

My Firestar 2 Build
Goto page Previous 1, 2, 3, 4 Next

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

George Alexander

Joined: 10 Jan 2006
Posts: 245
Location: SW Florida

Posted: Sat Nov 10, 2018 1:34 pm Post subject: Re: My Firestar 2 Build

 	  loctupdave wrote: 	
		  does anyone know what purpose this tab serves. I plan to cover this into a full canopy and it will be in the way. My thought is to cut it off. 



distant pic



	




It would seem to be the attach point for the pulley for the pull start.

See attached photo.

20150528_104046 (Medium).jpg

Description:

Filesize:

127.32 KB

Viewed:

17704 Time(s)

_________________
George Alexander
FS II R503
E-LSA N709FS
http://www.oh2fly.net

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Sun Nov 11, 2018 9:11 am Post subject: Re: My Firestar 2 Build

Ritchard

 I have been looking at your Kolb with a full enclosure, I was looking for ideas on how I was going to do just that. The question is what kind of cruse speed you are getting on that bird with wheel pants, enclosure, strut and wheel leg fairings, and what engine are you using? A question from a newbie to the site. 



  	  Richard Pike wrote: 	
		   	  loctupdave wrote: 	
		  I have to fix it. The bar that is broken is the bar that the pilot seat back rest on. 	




Roger that! That is not the one I am referring to, the one that needs to be cut is several inches lower and about 14" further back. Call Kolb and ask them.

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Sun Nov 18, 2018 1:23 pm Post subject: Re: My Firestar 2 Build

I said enough with the paint stripper and took the fuselage to a sandblaster. 

Now that the weather is hanging in the upper 20's I be waiting for warmer days for painting. 







So what I have been working on is stripping down the engine for rebuild.

ceengland7(at)gmail.com
Guest

Posted: Sun Nov 18, 2018 2:09 pm Post subject: My Firestar 2 Build

On 11/18/2018 3:23 PM, loctupdave wrote:

 	  Quote: 	
		   



 I said enough with the paint stripper and took the fuselage to a sandblaster.

 Now that the weather is hanging in the upper 20's I be waiting for warmer days for painting.



   (http://s275.photobucket.com/user/dngspot/media/sandblasted_zpsrh4vqkvb.jpg.html)



 So what I have been working on is stripping down the engine for rebuild.



   (http://s275.photobucket.com/user/dngspot/media/partial%20engine_zpsuwyncnuf.jpg.html)

If there's *any* moisture in the air, it won't look like that for long. 
	


I'd be finding a way to get some kind of rust proofing on there quickly.



Charlie



---

This email has been checked for viruses by Avast antivirus software.

https://www.avast.com/antivirus

Richard Pike

Joined: 09 Jan 2006
Posts: 1671
Location: Blountville, Tennessee

Posted: Sun Nov 18, 2018 6:02 pm Post subject: Re: My Firestar 2 Build

 	  loctupdave wrote: 	
		  Ritchard

 I have been looking at your Kolb with a full enclosure, I was looking for ideas on how I was going to do just that. The question is what kind of cruse speed you are getting on that bird with wheel pants, enclosure, strut and wheel leg fairings, and what engine are you using? A question from a newbie to the site. 

	




When I had the original fat aluminum gear, adding fairings to the gear changed the nose up/nose down trim noticeably, and added a couple of mph to the cruise speed.

Do not have wheel pants now.

The current enclosure gives me around 65 mph at 5400 rpm with the 582, IVO 72" 2 blade, and 2.58:1 B box.

The wing struts are extruded faired, so they are as good as they are going to get.

_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.

haybail

Joined: 20 Nov 2018
Posts: 1
Location: Big bear lake. Ca.

Posted: Tue Nov 20, 2018 4:11 pm Post subject: Re: My Firestar 2 Build

I just started to rebuild my barn find FS2 and the original plans show FS100 also, You may need to sand the end of the tube lightly to bring up numbers mine is marked F1002 with the latest revision 1993. I have been in touch with Kolb and they are going to see if they have records from that time period.



If there numbering is as most manufacturers use the "F" is the model The "1" is a control number and the last three Or four would designate build number. 



I could be completely WRONG! I will update when I find out.

gdhelton(at)gmail.com
Guest

Posted: Tue Nov 20, 2018 6:05 pm Post subject: My Firestar 2 Build

My frame is not a Firestar II. It is a original Firestar. It has no markings or stamped numbers on the cage or end of the root tube.

George H. 

Firestar , FS100

Mesick, Michigan 

gdhelton(at)gmail.com



Do not archive 



Sent from my iPhone



 	  Quote: 	
		   On Nov 20, 2018, at 7:11 PM, haybail <mralanhay(at)gmail.com> wrote:

 

 

 

 I just started to rebuild my barn find FS2 and the original plans show FS100 also, You may need to sand the end of the tube lightly to bring up numbers mine is marked F1002 with the latest revision 1993. I have been in touch with Kolb and they are going to see if they have records from that time period.

 

 If there numbering is as most manufacturers use the "F" is the model The "1" is a control number and the last three Or four would designate build number. 

 

 I could be completely WRONG! I will update when I find out. 

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=485371#485371

williamtsullivan(at)att.n
Guest

Posted: Tue Nov 20, 2018 7:26 pm Post subject: My Firestar 2 Build

I had an original Firestar, with the 5 rib wings.  Mine had no serial numbers on the root tube, nor did it have any kind of identification plate or numbers.



                                                              Bill Sullivan

                                                              Tarboro, North Carolina (formerly Windsor Locks, Ct.)

do not archive

--------------------------------------------

On Tue, 11/20/18, George Helton <gdhelton(at)gmail.com> wrote:



 Subject: Re: Re: My Firestar 2 Build

 To: kolb-list(at)matronics.com

 Date: Tuesday, November 20, 2018, 9:04 PM

 

 

 Helton <gdhelton(at)gmail.com>

 

 My frame is not a Firestar II. It is a

 original Firestar. It has no markings or stamped numbers on

 the cage or end of the root tube.

 George H. 

 Firestar , FS100

 Mesick, Michigan 

 gdhelton(at)gmail.com

 

 Do not archive

gdhelton(at)gmail.com
Guest

Posted: Tue Nov 20, 2018 7:52 pm Post subject: My Firestar 2 Build

Sounds like the same as mine. 

Firestar II has a 7 rib wing design with apparently the build number stamped into the root tube end plate.

A friend and I built mine from a kit and plans in 1985/86. First flew it in the summer of 1986. It’s a great little original Firestar.  It’s been upgraded a bit since the early days.

George H.

Firestar 

Mesick, Michigan 



Sent from my iPhone



 	  Quote: 	
		   On Nov 20, 2018, at 10:25 PM, william sullivan <williamtsullivan(at)att.net> wrote:

 

 

 

  I had an original Firestar, with the 5 rib wings.  Mine had no serial numbers on the root tube, nor did it have any kind of identification plate or numbers.

 

                                                              Bill Sullivan

                                                              Tarboro, North Carolina (formerly Windsor Locks, Ct.)

 do not archive

 --------------------------------------------

 On Tue, 11/20/18, George Helton <gdhelton(at)gmail.com> wrote:

 

 Subject: Re: Re: My Firestar 2 Build

 To: kolb-list(at)matronics.com

 Date: Tuesday, November 20, 2018, 9:04 PM

 

 

 Helton <gdhelton(at)gmail.com>

 

 My frame is not a Firestar II. It is a

 original Firestar. It has no markings or stamped numbers on

 the cage or end of the root tube.

 George H. 

 Firestar , FS100

 Mesick, Michigan 

 gdhelton(at)gmail.com

 

 Do not archive 

 

 

 

 

====================================
	


====================================

====================================

====================================

====================================

====================================

 	  Quote:

image1.jpeg

Description:

Filesize:

151.25 KB

Viewed:

17500 Time(s)

lcottrell

Joined: 29 May 2006
Posts: 1494
Location: Jordan Valley, Or

Posted: Tue Nov 20, 2018 9:36 pm Post subject: My Firestar 2 Build

My first one had the number FS11 it was built in 94, and its my understanding that it was the identification of the cage not a build number. I still used it as my serial number 

On Tue, Nov 20, 2018 at 8:54 PM George Helton <gdhelton(at)gmail.com (gdhelton(at)gmail.com)> wrote:

 	  Quote: 	
		  Sounds like the same as mine. 

 Firestar II has a 7 rib wing design with apparently the build number stamped into the root tube end plate.

 A friend and I built mine from a kit and plans in 1985/86. First flew it in the summer of 1986. It’s a great little original Firestar.  It’s been upgraded a bit since the early days.

 George H.

 Firestar 

 Mesick, Michigan 

 Sent from my iPhone

 > On Nov 20, 2018, at 10:25 PM, william sullivan <williamtsullivan(at)att.net (williamtsullivan(at)att.net)> wrote:

 > 

 > --> Kolb-List message posted by: william sullivan <williamtsullivan(at)att.net (williamtsullivan(at)att.net)>

 > 

 >  I had an original Firestar, with the 5 rib wings.  Mine had no serial numbers on the root tube, nor did it have any kind of identification plate or numbers.

 > 

 >                                                              Bill Sullivan

 >                                                              Tarboro, North Carolina (formerly Windsor Locks, Ct.)

 > do not archive

 > --------------------------------------------

 > On Tue, 11/20/18, George Helton <gdhelton(at)gmail.com (gdhelton(at)gmail.com)> wrote:

 > 

 > Subject: Re: Re: My Firestar 2 Build

 > To: kolb-list(at)matronics.com (kolb-list(at)matronics.com)

 > Date: Tuesday, November 20, 2018, 9:04 PM

 > 

 > --> Kolb-List message posted by: George

 > Helton <gdhelton(at)gmail.com (gdhelton(at)gmail.com)>

 > 

 > My frame is not a Firestar II. It is a

 > original Firestar. It has no markings or stamped numbers on

 > the cage or end of the root tube.

 > George H. 

 > Firestar , FS100

 > Mesick, Michigan 

 > gdhelton(at)gmail.com (gdhelton(at)gmail.com)

 > 

 > Do not archive 

 > 

 > 

 > 

 > 

 ===========

 ===========

 ===========

 ===========

 ===========

 ===========

 > 

 > 

 > 

-- 

The older I get, the less tolerant I am of those who are intolerant of others.

If you forward this email, or any part of it, please remove my email address before sending.

_________________
do not archive

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Thu Nov 22, 2018 5:49 am Post subject: Re: My Firestar 2 Build

Thank you for the information. 

The root tube and the rest of the fuselage is clean of paint to the metal. There is no numbers on the root tube front or back.

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Sun Nov 25, 2018 5:34 am Post subject: Re: My Firestar 2 Build

I have the engine apart. The cylinder walls look great and the pistons have carbon deposits. I will sand blast the complete engine exterior, I will do the pistons and heads also. The crank looks and feels great, no clicking or other strange noises from the bearings and they seem to be tight. The crank and the lower case is in solvent, so they will not be seen in the pic. 







We had a warm day, so the fuselage frame was painted.

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Tue Dec 11, 2018 2:42 pm Post subject: Re: My Firestar 2 Build

Another pic of engine parts.







Before and after sandblasting  











engine partially assembled

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Sat Mar 23, 2019 10:51 am Post subject: Re: My Firestar 2 Build

I haven't posted for a while, when the weather is below 0 or even 20 the hanger is just to dang cold to work in. 

The engine is moving on. I had to order starter o rings thanks to the oil injection leaking over the starter and taking out the o rings. I still need to rebuild the carbs and install the starter. I went with the Challenger muffler mount. Here are a couple of pics. 















Forgive the messy shop. 

I spent the day working on the landing gear legs. The right tube was a bit small about half way in. I ordered a reamer and took care of that.

williamtsullivan(at)att.n
Guest

Posted: Sat Mar 23, 2019 12:30 pm Post subject: My Firestar 2 Build

Question- Is there much chance of the muffler mount cracking?  Stainless?



                                                    Bill Sullivan

--------------------------------------------

On Sat, 3/23/19, loctupdave <loctupdave(at)att.net> wrote:



 

 

 I haven't posted for a while, when the

 weather is below 0 or even 20 the hanger is just to dang

 cold to work in. 

 The engine is moving on. I had to order

 starter o rings thanks to the oil injection leaking over the

 starter and taking out the o rings. I still need to rebuild

 the carbs and install the starter. I went with the

 Challenger muffler mount. Here are a couple of pics. 

 

  (http://s275.photobucket.com/user/dngspot/media/front_zpszgldaco0.jpg.html)

gdhelton(at)gmail.com
Guest

Posted: Sat Mar 23, 2019 1:17 pm Post subject: My Firestar 2 Build

Yeah, stainless can crack just like anything else. I’d just keep my eye on it. It’ll crack before It breaks. 

George H

Firestar 

14GDH 

Mesick, Michigan 

gdhelton(at)gmail.com



Sent from my iPhone



 	  Quote: 	
		   On Mar 23, 2019, at 4:29 PM, william sullivan <williamtsullivan(at)att.net> wrote:

 

 

 

  Question- Is there much chance of the muffler mount cracking?  Stainless?

 

                                                    Bill Sullivan

 --------------------------------------------

 On Sat, 3/23/19, loctupdave <loctupdave(at)att.net> wrote:

 

 

 

 I haven't posted for a while, when the

 weather is below 0 or even 20 the hanger is just to dang

 cold to work in. 

 The engine is moving on. I had to order

 starter o rings thanks to the oil injection leaking over the

 starter and taking out the o rings. I still need to rebuild

 the carbs and install the starter. I went with the

 Challenger muffler mount. Here are a couple of pics. 

 

  (http://s275.photobucket.com/user/dngspot/media/front_zpszgldaco0.jpg.html)

loctupdave

Joined: 01 Sep 2018
Posts: 25

Posted: Sun Mar 24, 2019 4:18 am Post subject: Re: My Firestar 2 Build

Thank you for the attention. I will keep an eye on the bracket.

byoungplumbing(at)gmail.c
Guest

Posted: Sun Mar 24, 2019 6:54 am Post subject: My Firestar 2 Build

"Question- Is there much chance of the muffler mount cracking? Stainless? 



Bill Sullivan"



Bill, stainless will fatigue and crack like any other metal.   To reduce the chances, keep the vibration to a minimum, keep the exposed metal past the anchor point as short and light as possible, in order to make both rules happen,  add another brace.  In two directions (triangulate) if possible, safety wire works to keep small problems from going through the prop and becoming big ones. add vibration isolaters.

When you've done your best, grab it and shake looking for movement then keep an eye on it!



Do not archive



Boyd Young



Mkiii Utah

williamtsullivan(at)att.n
Guest

Posted: Sun Mar 24, 2019 7:23 am Post subject: My Firestar 2 Build

Boyd- My experience with stainless is limited to my silverware drawer!



                                                     Bill Sullivan

do not archive

--------------------------------------------

On Sun, 3/24/19, B Young <byoungplumbing(at)gmail.com> wrote:



 Subject: Re: Re: My Firestar 2 Build

 To: "Kolb List" <kolb-list(at)matronics.com>

 Date: Sunday, March 24, 2019, 10:52 AM

 

 "Question-

 Is there much chance of the muffler mount cracking?

 Stainless? 

 

 Bill Sullivan"

 

 Bill, stainless will fatigue and crack like any other

 metal.   To reduce the chances, keep the vibration to a

 minimum, keep the exposed metal past the anchor point as

 short and light as possible, in order to make both rules

 happen,  add another brace.  In two directions

 (triangulate) if possible, safety wire works to keep small

 problems from going through the prop and becoming big ones.

 add vibration isolaters.

 When you've done your best, grab it and shake looking

 for movement then keep an eye on it!

 

 Do not archive

 

 Boyd Young

 

 Mkiii Utah

John Hauck

Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)

Posted: Sun Mar 24, 2019 7:34 am Post subject: My Firestar 2 Build

My experience with two strokes and hard mounted accessories is it is just a matter of time before a stress crack appears.  Unfortunately, everything that falls off the engine on a Kolb goes through the prop.

 

Important to do a thorough preflight each day, and continue to check the engine after landing.

 

I've lost muffler mounts, a football size oil tank for a 582, strobe light, lots of exhaust systems to vibration.  Had lots of problems with vibration and early exhaust systems on the 912.  Stainless with definitely let you down.  Keep an eye on it.

 

Beautiful flying weather at hauck's holler, but Miss P'fer needs some TLC before she will fly again.

 

john h

mkIII

Titus, Alabama

 

 

 

 

From: owner-kolb-list-server(at)matronics.com [mailto:owner-kolb-list-server(at)matronics.com] On Behalf Of B Young

Sent: Sunday, March 24, 2019 9:53 AM

To: Kolb List

Subject: Re: Re: My Firestar 2 Build



 



"Question- Is there much chance of the muffler mount cracking? Stainless? 



Bill Sullivan"



Bill, stainless will fatigue and crack like any other metal.   To reduce the chances, keep the vibration to a minimum, keep the exposed metal past the anchor point as short and light as possible, in order to make both rules happen,  add another brace.  In two directions (triangulate) if possible, safety wire works to keep small problems from going through the prop and becoming big ones. add vibration isolaters.

When you've done your best, grab it and shake looking for movement then keep an eye on it!



Do not archive



Boyd Young



Mkiii Utah

_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours Goto page Previous 1, 2, 3, 4 Next
Page 3 of 4

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum