Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

CJ Jacks needed

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

Off2wildblue

Joined: 18 Apr 2018
Posts: 45

Posted: Fri Nov 30, 2018 8:14 am Post subject: CJ Jacks needed

New CJ-6, now I need the jacks. Any idea's or does anyone have any available? 



Also, if you made some, could you send me pics please?



FYI, I checked and Doug Sapp doesn't have any right now.



You can contact me off list.



Thanks,



SAM

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

billaustin(at)blomand.net
Guest

Posted: Fri Nov 30, 2018 8:58 am Post subject: CJ Jacks needed

I have a set. Call me 615-406-1055

  "Off2wildblue" <Off2wildblue(at)me.com> wrote:

 	  Quote: 	
		   

 

 New CJ-6, now I need the jacks. Any idea's or does anyone have any 

available? 

 

 Also, if you made some, could you send me pics please?

 

FYI, I checked and Doug Sapp doesn't have any right now.

 

 You can contact me off list.

 

 Thanks,

 

 SAM

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=486040#486040

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

marcusbates(at)att.net
Guest

Posted: Fri Nov 30, 2018 10:13 am Post subject: CJ Jacks needed

I have a set for a Yak 52..........



Sent from my iPad



 	  Quote: 	
		   On Nov 30, 2018, at 11:01 AM, Bill Austin <billaustin(at)blomand.net> wrote:

 

 

 

 I have a set. Call me 615-406-1055

 "Off2wildblue" <Off2wildblue(at)me.com> wrote:

> 

> New CJ-6, now I need the jacks. Any idea's or does anyone have any available? Also, if you made some, could you send me pics please?

> FYI, I checked and Doug Sapp doesn't have any right now.

> You can contact me off list.

> Thanks,

> SAM

> Read this topic online here:

> http://forums.matronics.com/viewtopic.php?p=486040#486040

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

jbsoar(at)gmail.com
Guest

Posted: Fri Nov 30, 2018 12:59 pm Post subject: CJ Jacks needed

What jacks are needed for a Yak 50?  



On Fri, Nov 30, 2018 at 12:22 PM Marcus Bates <marcusbates(at)att.net (marcusbates(at)att.net)> wrote:



 	  Quote: 	
		  --> Yak-List message posted by: Marcus Bates <marcusbates(at)att.net (marcusbates(at)att.net)>

 

 I have a set for a Yak 52..........

 

 Sent from my iPad

 

 > On Nov 30, 2018, at 11:01 AM, Bill Austin <billaustin(at)blomand.net (billaustin(at)blomand.net)> wrote:

 > 

 > --> Yak-List message posted by: "Bill Austin" <billaustin(at)blomand.net (billaustin(at)blomand.net)>

 > 

 > I have a set. Call me 615-406-1055

 > "Off2wildblue" <Off2wildblue(at)me.com (Off2wildblue(at)me.com)> wrote:

 >> --> Yak-List message posted by: "Off2wildblue" <Off2wildblue(at)me.com (Off2wildblue(at)me.com)>

 >> New CJ-6, now I need the jacks. Any idea's or does anyone have any available? Also, if you made some, could you send me pics please?

 >> FYI, I checked and Doug Sapp doesn't have any right now.

 >> You can contact me off list.

 >> Thanks,

 >> SAM

 >> Read this topic online here:

 >> http://forums.matronics.com/viewtopic.php?p=486040#486040

 > 

 > 

 > 

 > 

 > 

 

 

 ===========

 br> fts!)

 r> > e.com" rel="noreferrer" target="_blank">www.mypilotstore.com

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

           -Matt Dralle, List Admin.

 ===========

 List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Yak-List

 ===========

  FORUMS -

 eferrer" target="_blank">http://forums.matronics.com

 ===========

 WIKI -

 errer" target="_blank">http://wiki.matronics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer" target="_blank">http://www.matronics.com/contribution

 ===========

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

mark.bitterlich(at)navy.m
Guest

Posted: Fri Nov 30, 2018 1:28 pm Post subject: CJ Jacks needed

YAK-52 or Sukhoi jacks will work.   You will need three 14mm lug nut studs (from an old Volkswagen for example), to screw into the three jack points.  One on each wing and one in the NOSE (not the tail.  The way the jack points on a 50 are setup, as you jack the wings, the aircraft's CG is forward, not aft, and the weight is then put on the nose jack.  Unscrew any fittings from the top of the jack and then figure out a way for the 14mm lug nut studs to fit into the top of the jack and not bottom out.  If you cycle the gear, be careful that you know exactly what you are doing if you choose to exercise the emergency blow down bottle.  More than one YAK-50 has jumped right off the jacks when doing that, by those not aware of how careful to be, let alone knowing how to reset the shuttle valves afterwards.  Dennis Savarese can guide you through that process, or you can check the archives.



Mark

--

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Clouddog

Joined: 02 Jun 2016
Posts: 119
Location: Lebanon, TN

Posted: Fri Nov 30, 2018 2:17 pm Post subject: CJ Jacks needed

Here is what I have had fabricated over the last 2 years for CJ. 



On Fri, Nov 30, 2018, 15:36 Bitterlich, Mark G CIV NAVAIR, WD <mark.bitterlich(at)navy.mil (mark.bitterlich(at)navy.mil) wrote:



[quote]--> Yak-List message posted by: "Bitterlich, Mark G CIV NAVAIR, WD" <mark.bitterlich(at)navy.mil (mark.bitterlich(at)navy.mil)>

 

 YAK-52 or Sukhoi jacks will work.   You will need three 14mm lug nut studs (from an old Volkswagen for example), to screw into the three jack points.  One on each wing and one in the NOSE (not the tail.  The way the jack points on a 50 are setup, as you jack the wings, the aircraft's CG is forward, not aft, and the weight is then put on the nose jack.  Unscrew any fittings from the top of the jack and then figure out a way for the 14mm lug nut studs to fit into the top of the jack and not bottom out.  If you cycle the gear, be careful that you know exactly what you are doing if you choose to exercise the emergency blow down bottle.  More than one YAK-50 has jumped right off the jacks when doing that, by those not aware of how careful to be, let alone knowing how to reset the shuttle valves afterwards.  Dennis Savarese can guide you through that process, or you can check the archives.

 

 Mark

 

 

 --

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

IMG_20181130_155305075.jpg

Description:

Filesize:

2.61 MB

Viewed:

6338 Time(s)

Clouddog

Joined: 02 Jun 2016
Posts: 119
Location: Lebanon, TN

Posted: Mon Dec 03, 2018 5:22 am Post subject: CJ Jacks needed

Here is what I have had fabricated the past 4 years.



Greg

clouddog22(at)gmail.com (clouddog22(at)gmail.com)

On Fri, Nov 30, 2018, 10:21 Off2wildblue <Off2wildblue(at)me.com (Off2wildblue(at)me.com) wrote:



 	  Quote: 	
		  --> Yak-List message posted by: "Off2wildblue" <Off2wildblue(at)me.com>

 

 New CJ-6, now I need the jacks. Any idea's or does anyone have any available? 

 

 Also, if you made some, could you send me pics please?

 

 FYI, I checked and Doug Sapp doesn't have any right now.

 

 You can contact me off list.

 

 Thanks,

 

 SAM

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=486040#486040

 

 

 

 

 

 

 ===========

 br> fts!)

 r> > www.mypilotstore.com

 ics.com/contribution

           -Matt Dralle, List Admin.

 ===========

 ics.com/Navigator?Yak-List

 ===========

  FORUMS -

 ronics.com

 ===========

 WIKI -

 nics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 ics.com/contribution

 ===========

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

IMG_20181130_155305075.jpg

Description:

Filesize:

2.61 MB

Viewed:

6295 Time(s)

Off2wildblue

Joined: 18 Apr 2018
Posts: 45

Posted: Fri Dec 21, 2018 4:04 pm Post subject: Re: CJ Jacks needed

Got the main jacks from Bill Austin.  Really appreciate that. Now does anyone have advice on nose and tail jacks?  Measurements of yours might help.  You can contact me off list.



Thanks again Bill!



SAM



 	  billaustin(at)blomand.net wrote: 	
		  I have a set. Call me 615-406-1055

  "Off2wildblue" <Off2wildblue> wrote:

 	  Quote: 	
		   

 

 New CJ-6, now I need the jacks. Any idea's or does anyone have any 

available? 

 

 Also, if you made some, could you send me pics please?

 

FYI, I checked and Doug Sapp doesn't have any right now.

 

 You can contact me off list.

 

 Thanks,

 

 SAM

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=486040#486040

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Off2wildblue

Joined: 18 Apr 2018
Posts: 45

Posted: Sat Jan 19, 2019 7:33 am Post subject: Re: CJ Jacks needed

Just letting you guys know that I fabricated my nose and tail Jack’s. Here’s how they turned out. In case you guys out there need a set. Maybe it will give you some ideas.



SAM



By the way, if anybody knows how to make the picture smaller one sent from your phone please let me know!

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

91FDD708-D4F3-4E2D-AD5C-0F17D139CECC.jpeg

Description:

Filesize:

2.73 MB

Viewed:

6035 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum