Matronics Email Lists :: View topic - Need spark plug wrench for # 6 cylinder

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Need spark plug wrench for # 6 cylinder

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

motoadve

Joined: 23 Apr 2009
Posts: 123
Location: Seattle

Posted: Tue Dec 04, 2018 6:53 am Post subject: Need spark plug wrench for # 6 cylinder

Doug does not have them in stock.



Any other source?

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

_________________
www.Backcountry182.com
Cessna 182 P
CJ -6

Top Ace

Joined: 07 Jun 2016
Posts: 25
Location: Montreal, Canada

Posted: Wed Dec 05, 2018 12:55 pm Post subject: Re: Need spark plug wrench for # 6 cylinder

Alternate is take the 22mm, or 7/8th long socket, cut or grind down one side at 45 degrees off the socket head, and then it will work, on cyl, # 6,, 

or wait till Doug gets some in for you,, 

David

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

GeorgeCoy

Joined: 02 Dec 2010
Posts: 310

Posted: Wed Dec 05, 2018 2:21 pm Post subject: Need spark plug wrench for # 6 cylinder

We have a limited quantity of these basic tool kits available at the

factory, but they aren't cheap $525 each plus shipping. 



George Coy

MotorstarNA

714 Airport Rd.

Swanton VT 05488

802-868-5633 off

802-363-5782 cell

george.coy(at)gmail.com

http://motorstarna.com/

SKYPE george.coy



--

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

M-14P_Tool_kit_(003).JPG

Description:

Filesize:

662.93 KB

Viewed:

3646 Time(s)

wlannon(at)shaw.ca
Guest

Posted: Wed Dec 05, 2018 9:38 pm Post subject: Need spark plug wrench for # 6 cylinder

George et al:



I am more than a little confused about the problem with the #6 cyl. rear 

spark having been removing and installing these regularly for about 25 

years.



I normally use the Chinese spark plug wrench for removal and my 80 year old 

P & W spark plug socket (7/8" deep)  and torque wrench for installation 

including #5 and #6 rear; they are both a pain in the ass!  The only 

difference with these is that you simply attach the socket to the plug 

before attaching the torque wrench.  These are all 3/8" drive tools, 1/2' 

may be a problem but I don't know.  I have never found a need to modify the 

socket.



Sounds simple but now it get's interesting!  Looking at the very nice photo 

George supplied I fail to see a spark plug wrench (these are Russian but no 

significant difference at all).  So time to check out the HS6A Parts Cat. 

Tools section.  See pg. 259 and on.  Fig 17 -1, Item 10 is described as a 

"spark plug spanner".  This is exactly the same tool as shown # 6 from the 

left in George's photo.  Well I'll be damned!  The real Chinese spark plug 

wrench des not apparently exist!



I have two or three of these laying around the hangar.  They sure enough are 

22mm and fit the spark plug but as a spark plug wrench they are virtually 

useless particularly for #6 rear.  In fact I have found no use for them at 

all.



My guess is the Chinese Air Force grunts agreed with me and designed a tool 

that actually works!  In which case my good buddy Doug will know all about 

this and get some in stock.  They are not really necessary but are very 

convenient for plug removal.



If my brain is in working order tomorrow I will get a photo of the non - 

existant wrench for you.



Cheers;

Walt

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

dougsappllc(at)gmail.com
Guest

Posted: Thu Dec 06, 2018 11:01 am Post subject: Need spark plug wrench for # 6 cylinder

"Spanner for spark plug of cylinder no.6" is shown in my version of the IPBs on page 122 of book #3, figure 2-7.



On the web site CJ6.org it is shown in book #3, but on page 126, which means that there are at lease two maybe 3 different iterations of the CJ6 parts books out there.

We think we have the bugs worked out of the downloads on the site now, others report success in downloading the manuals.

Doug

On Wed, Dec 5, 2018 at 9:48 PM Walter Lannon <wlannon(at)shaw.ca (wlannon(at)shaw.ca)> wrote:



[quote]--> Yak-List message posted by: "Walter Lannon" <wlannon(at)shaw.ca (wlannon(at)shaw.ca)>

 

 George et al:

 

 I am more than a little confused about the problem with the #6 cyl. rear 

 spark having been removing and installing these regularly for about 25 

 years.

 

 I normally use the Chinese spark plug wrench for removal and my 80 year old 

 P & W spark plug socket (7/8" deep)  and torque wrench for installation 

 including #5 and #6 rear; they are both a pain in the ass!  The only 

 difference with these is that you simply attach the socket to the plug 

 before attaching the torque wrench.  These are all 3/8" drive tools, 1/2' 

 may be a problem but I don't know.  I have never found a need to modify the 

 socket.

 

 Sounds simple but now it get's interesting!  Looking at the very nice photo 

 George supplied I fail to see a spark plug wrench (these are Russian but no 

 significant difference at all).  So time to check out the HS6A Parts Cat. 

 Tools section.  See pg. 259 and on.  Fig 17 -1, Item 10 is described as a 

 "spark plug spanner".  This is exactly the same tool as shown # 6 from the 

 left in George's photo.  Well I'll be damned!  The real Chinese spark plug 

 wrench des not apparently exist!

 

 I have two or three of these laying around the hangar.  They sure enough are 

 22mm and fit the spark plug but as a spark plug wrench they are virtually 

 useless particularly for #6 rear.  In fact I have found no use for them at 

 all.

 

 My guess is the Chinese Air Force grunts agreed with me and designed a tool 

 that actually works!  In which case my good buddy Doug will know all about 

 this and get some in stock.  They are not really necessary but are very 

 convenient for plug removal.

 

 If my brain is in working order tomorrow I will get a photo of the non - 

 existant wrench for you.

 

 Cheers;

 Walt

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum