 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
GalinHdz
Joined: 08 Nov 2017
Posts: 150
|
 Posted: Thu Jan 03, 2019 9:20 pm Post subject: New (to me) LED Landing Lights |
 |
|
In 2011 I replaced my two Halogen landing lights with two Aerosun 800 (only the 1600's are currently produced). They put out a lot more light and use significantly less current than Halogen. A few weeks ago a friend of mine installed a pair of BajaDesign Squadron Pro lights and I saw how much more light they put out for about the same current draw. Unfortunately, they are just a bit too big to install in the leading edge of my airplane wing, so I ordered a pair of their smaller S2 Pro Lights and installed them. Even though the Aerosun 800's are brighter than my old Halogens, the S2 Pro's are so much brighter. I have attached pictures so you can see the difference between them.
Neither of the two generate any RF interference in my fiberglass airplane which was a big concern for me. The Aerosun 800 have a built in wig-wag circuit where the S2 Pro does not. In order to get them to wig-wag I will install a Crazed Pilot wig-wag unit which was highly recommended for this application.
So if you are looking to install some awesome LED landing lights in one of our airplanes, I highly recommend either of these.
https://aeroleds.com/products/aerosun/
https://www.bajadesigns.com/products/S2-Pro.asp
https://www.crazedpilot.com/led-strobe-wig-wag-and-landing-light-controller/
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
| Description: |
|
| Filesize: |
162.85 KB |
| Viewed: |
5801 Time(s) |
|
| Description: |
|
| Filesize: |
156.67 KB |
| Viewed: |
5801 Time(s) |
|
|
|
| Back to top |
|
 |
hansoncp(at)netnitco.net
Guest
|
| Posted: Sat Jan 05, 2019 7:23 pm Post subject: New (to me) LED Landing Lights |
|
|
Galin, did you get the spots or the combo units.
Sent from Mail for Windows 10
From: Galin Hernandez (galinhdz(at)gmail.com)
Sent: Thursday, January 3, 2019 11:18 PM
To: kis-list(at)matronics.com (kis-list(at)matronics.com)
Subject: New (to me) LED Landing Lights
In 2011 I replaced my two Halogen landing lights with two Aerosun 800 (only the 1600's are currently produced). They put out a lot more light and use significantly less current than Halogen. A few weeks ago a friend of mine installed a pair of BajaDesign Squadron Pro lights and I saw how much more light they put out for about the same current draw. Unfortunately, they are just a bit too big to install in the leading edge of my airplane wing, so I ordered a pair of their smaller S2 Pro Lights and installed them. Even though the Aerosun 800's are brighter than my old Halogens, the S2 Pro's are so much brighter. I have attached pictures so you can see the difference between them.
Neither of the two generate any RF interference in my fiberglass airplane which was a big concern for me. The Aerosun 800 have a built in wig-wag circuit where the S2 Pro does not. In order to get them to wig-wag I will install a Crazed Pilot wig-wag unit which was highly recommended for this application.
So if you are looking to install some awesome LED landing lights in one of our airplanes, I highly recommend either of these.
https://aeroleds.com/products/aerosun/
https://www.bajadesigns.com/products/S2-Pro.asp
https://www.crazedpilot.com/led-strobe-wig-wag-and-landing-light-controller/
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
GalinHdz
Joined: 08 Nov 2017
Posts: 150
|
| Posted: Sun Jan 06, 2019 5:38 am Post subject: New (to me) LED Landing Lights |
|
|
I got the spot units. On approach you can see the runway significantly higher. They have enough "bleed over" to make taxiing with them a complete non issue. Besides, we approach to land at about 80Kts while we taxi at less than 15Kts.
On Sat, Jan 5, 2019 at 10:24 PM Ed Hanson <hansoncp(at)netnitco.net (hansoncp(at)netnitco.net)> wrote:
| Quote: |
Galin, did you get the spots or the combo units.
Sent from Mail for Windows 10
From: Galin Hernandez (galinhdz(at)gmail.com)
Sent: Thursday, January 3, 2019 11:18 PM
To: kis-list(at)matronics.com (kis-list(at)matronics.com)
Subject: New (to me) LED Landing Lights
In 2011 I replaced my two Halogen landing lights with two Aerosun 800 (only the 1600's are currently produced). They put out a lot more light and use significantly less current than Halogen. A few weeks ago a friend of mine installed a pair of BajaDesign Squadron Pro lights and I saw how much more light they put out for about the same current draw. Unfortunately, they are just a bit too big to install in the leading edge of my airplane wing, so I ordered a pair of their smaller S2 Pro Lights and installed them. Even though the Aerosun 800's are brighter than my old Halogens, the S2 Pro's are so much brighter. I have attached pictures so you can see the difference between them.
Neither of the two generate any RF interference in my fiberglass airplane which was a big concern for me. The Aerosun 800 have a built in wig-wag circuit where the S2 Pro does not. In order to get them to wig-wag I will install a Crazed Pilot wig-wag unit which was highly recommended for this application.
So if you are looking to install some awesome LED landing lights in one of our airplanes, I highly recommend either of these.
https://aeroleds.com/products/aerosun/
https://www.bajadesigns.com/products/S2-Pro.asp
https://www.crazedpilot.com/led-strobe-wig-wag-and-landing-light-controller/
|
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
|
|
| Back to top |
|
|
GalinHdz
Joined: 08 Nov 2017
Posts: 150
|
| Posted: Wed Jan 16, 2019 7:00 pm Post subject: New (to me) LED Landing Lights |
|
|
I went flying today and did my 1st night landing with the new lights. It is a BIG difference in illumination. I could see the runway markings from about 500ft and illumination while taxiing was significantly better. I attached two photos of the lights in use. One are the lights illuminating the hangar across the way from mine while the other is as I taxied back from landing.
On Sun, Jan 6, 2019 at 8:37 AM Galin Hernandez <galinhdz(at)gmail.com (galinhdz(at)gmail.com)> wrote:
| Quote: | I got the spot units. On approach you can see the runway significantly higher. They have enough "bleed over" to make taxiing with them a complete non issue. Besides, we approach to land at about 80Kts while we taxi at less than 15Kts.
On Sat, Jan 5, 2019 at 10:24 PM Ed Hanson <hansoncp(at)netnitco.net (hansoncp(at)netnitco.net)> wrote:
| Quote: |
Galin, did you get the spots or the combo units.
Sent from Mail for Windows 10
From: Galin Hernandez (galinhdz(at)gmail.com)
Sent: Thursday, January 3, 2019 11:18 PM
To: kis-list(at)matronics.com (kis-list(at)matronics.com)
Subject: KIS-List: New (to me) LED Landing Lights
In 2011 I replaced my two Halogen landing lights with two Aerosun 800 (only the 1600's are currently produced). They put out a lot more light and use significantly less current than Halogen. A few weeks ago a friend of mine installed a pair of BajaDesign Squadron Pro lights and I saw how much more light they put out for about the same current draw. Unfortunately, they are just a bit too big to install in the leading edge of my airplane wing, so I ordered a pair of their smaller S2 Pro Lights and installed them. Even though the Aerosun 800's are brighter than my old Halogens, the S2 Pro's are so much brighter. I have attached pictures so you can see the difference between them.
Neither of the two generate any RF interference in my fiberglass airplane which was a big concern for me. The Aerosun 800 have a built in wig-wag circuit where the S2 Pro does not. In order to get them to wig-wag I will install a Crazed Pilot wig-wag unit which was highly recommended for this application.
So if you are looking to install some awesome LED landing lights in one of our airplanes, I highly recommend either of these.
https://aeroleds.com/products/aerosun/
https://www.bajadesigns.com/products/S2-Pro.asp
https://www.crazedpilot.com/led-strobe-wig-wag-and-landing-light-controller/
|
|
| | - The Matronics KIS-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?KIS-List |
|
| Description: |
|
| Filesize: |
195.9 KB |
| Viewed: |
5741 Time(s) |
|
| Description: |
|
| Filesize: |
145.23 KB |
| Viewed: |
5741 Time(s) |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
