|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
budyerly(at)msn.com Guest
|
Posted: Mon May 06, 2019 7:42 am Post subject: Airmaster Spinner front bulkhead non adjustable model. |
|
|
Johnathan,
It sounds as if your front bulkhead is the old style which is not adjustable. That is OK. The best way to make a permanent fix is to clean the inside of the spinner, apply a thin layer of oil or release agent to the spinner, then apply RTV around the cap bulkhead. Push on the spinner and bolt it down and it will make contact and seal up that gap. Remove after cure and trim for a neat finish. Keep in mind that automotive RTV or silicone sealant against aluminum will corrode the aluminum during cure as most contain citrus acid (i.e. that acid taste) so you may consider using a non-acidic or neutral cure type RTV such as Dow737.
Another way which I have never done, is to apply silicone sealant to the motor cap, so the bulkhead is proud of the end cap and push the spinner on and bolt down. I have never done this as the plastic bulkhead still rubs directly on the aluminum causing eventual wear as seen as aluminum dust. RTV is softer and less abrasive under vibration.
Bottom line is if the gap is too large, the spinner screws will eventually wear and that is a fatigue source for an eventual crack in any spinner.
Best Regards,
Bud Yerly
Sent from Mail for Windows 10
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
JonathanMilbank
Joined: 14 Apr 2012 Posts: 391 Location: Aberdeen area
|
Posted: Mon May 06, 2019 3:30 pm Post subject: Re: Airmaster Spinner front bulkhead non adjustable model. |
|
|
Thanks Bud,
Excellent advice, as always.
Best wishes,
Jonathan
| - The Matronics Europa-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|