 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
rparigoris
Joined: 24 Nov 2009
Posts: 796
|
 Posted: Wed Sep 25, 2019 11:41 pm Post subject: Do I need an inspection hole with Mod 10303? |
 |
|
Hi Group
I just completed Europa Club Useful Mod 10303 Flap Pin Guide on my Mono XS and it works great. Pay no attention to position of spherical bearing, just push wing in place and like magic all is great.
Kudos to Mr. Bishop.
Question: Do I need a hole on the top of Flap Root to inspect and see if Flap Drive Tube is engaged?
Ron P.
Hints for anyone wanting to do this Mod: I turned one side of the alignment spigot (.003") less than the OD of my Flap Cross Drive Tube. When I fabricated Profiled Guide Ring (out of 7075 aluminium), I bored till my Spigot barely slid in place when Ring was about 100F from turning. I scuff sanded ID of ring and OD of Flap Drive tube, heated Ring with heat gun and Loctite 638 in place. I turned a scrap of aluminium to act as a install tool with pocket for spherical bearing. The ring is not going anywhere anytime soon.
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
Paul M 383
Joined: 19 Mar 2012
Posts: 97
Location: United Kingdom
|
| Posted: Thu Sep 26, 2019 4:47 am Post subject: Re: Do I need an inspection hole with Mod 10303? |
|
|
| rparigoris wrote: | Hi Group
... Mod 10303 Flap Pin Guide on my Mono XS ...
Question: Do I need a hole on the top of Flap Root to inspect and see if Flap Drive Tube is engaged?
Ron P.
|
Note 4 on the Mod sheet reads “Half of observation window remains in flap closeout” so I’d guess it was written to be fitted after the flap closeout was built and the inspection hole fitted.
The implication being the hole is still there, but now half blocked by the guide cone. The hole, filled with a perspex window, is visible in the top drawings.
HTH,
Paul M
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
| Description: |
|
| Filesize: |
157.08 KB |
| Viewed: |
2679 Time(s) |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
