 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
jay-dub
Joined: 31 May 2014
Posts: 99
Location: UK
|
|
| Back to top |
|
 |
pennington.construction.i
Guest
|
 Posted: Sat Oct 31, 2020 3:44 pm Post subject: Swagelok |
 |
|
Jay
I use the all stainless steel valves the Doug supplies.
The photo is from a Yak list post from before.
I hung onto it in the event I couldn’t get a Chinese stainless valve. This is the valve for the main and emergency valves.
Mark
N621CJ
[img]cid:175810a6162a44d93281[/img]
[img]cid:175810a6bcd40077f272[/img]
On Sat, Oct 31, 2020 at 7:31 PM jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:
| Quote: | --> Yak-List message posted by: "jay-dub" <flyjnw(at)gmail.com (flyjnw(at)gmail.com)>
Please could someone tell me the spec of the Swagelok valves to replace the normal and emergency air valves.
Also, the snot valves.
Thanks from Lockdown, UK. [Rolling Eyes]
--------
CJ and Yak-52 owner
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=499045#499045
===========
List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?Yak-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
rel="noreferrer" target="_blank">http://www.matronics.com/contribution
===========
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
373.14 KB |
| Viewed: |
5210 Time(s) |
|
| Description: |
|
| Filesize: |
285.26 KB |
| Viewed: |
5210 Time(s) |
|
|
|
| Back to top |
|
|
jay-dub
Joined: 31 May 2014
Posts: 99
Location: UK
|
| Posted: Sat Oct 31, 2020 3:46 pm Post subject: Re: Swagelok |
|
|
Perfect, thanks.
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
_________________
CJ owner |
|
| Back to top |
|
|
wamflight(at)gmail.com
Guest
|
| Posted: Sat Oct 31, 2020 3:54 pm Post subject: Swagelok |
|
|
And the sizes we need to tap the threads? | Quote: | On Nov 1, 2020, at 8:42 AM, Mark Pennington <pennington.construction.inc.1(at)gmail.com (pennington.construction.inc.1(at)gmail.com)> wrote:
Jay
I use the all stainless steel valves the Doug supplies.
The photo is from a Yak list post from before.
I hung onto it in the event I couldn’t get a Chinese stainless valve. This is the valve for the main and emergency valves.
Mark
N621CJ
<IMG_4522.jpg>
<IMG_4521.jpg>
On Sat, Oct 31, 2020 at 7:31 PM jay-dub <flyjnw(at)gmail.com (flyjnw(at)gmail.com)> wrote:
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
k7wx
Joined: 24 May 2010
Posts: 117
|
| Posted: Sat Oct 31, 2020 3:54 pm Post subject: Swagelok |
|
|
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.
Warren Hill
N464TW
Mesa, AZ
[img]cid:EAE9B400-E834-43EA-9F8E-4560C6ABBEC3(at)Home[/img]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
244.06 KB |
| Viewed: |
5200 Time(s) |
|
|
|
| Back to top |
|
|
wamflight(at)gmail.com
Guest
|
| Posted: Sat Oct 31, 2020 4:02 pm Post subject: Swagelok |
|
|
did you tap the new valve? size?
| Quote: | On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.
Warren Hill
N464TW
Mesa, AZ
<Swagelok.jpg>
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
hill(at)doctor-hill.com
Guest
|
| Posted: Sat Oct 31, 2020 4:10 pm Post subject: Swagelok |
|
|
Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread.
| Quote: | On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:
did you tap the new valve? size?
| Quote: | On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.
Warren Hill
N464TW
Mesa, AZ
<Swagelok.jpg>
|
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
pennington.construction.i
Guest
|
| Posted: Sun Nov 01, 2020 2:27 am Post subject: Swagelok |
|
|
Jay
Here is a photo I saved of the snot valve with a swagelock valve.
At the time the post did not give a part number.
Maybe someone will recognize the valve and share the part number
Mark
N621 CJ
[img]cid:1758357376d6cd9bb2a1[/img]
On Sat, Oct 31, 2020 at 8:14 PM Warren Hill <hill(at)doctor-hill.com (hill(at)doctor-hill.com)> wrote:
| Quote: | Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread.
| Quote: | On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:
did you tap the new valve? size?
| Quote: | On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.
Warren Hill
N464TW
Mesa, AZ
<Swagelok.jpg>
|
|
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
301.16 KB |
| Viewed: |
5175 Time(s) |
|
|
|
| Back to top |
|
|
hkgibby(at)yahoo.com
Guest
|
| Posted: Sun Nov 01, 2020 5:56 am Post subject: Swagelok |
|
|
See RPA Library...click on CJ-6 Nanchang; it’s there.
Sent from my iPhone
| Quote: | On Nov 1, 2020, at 2:40 AM, Mark Pennington <pennington.construction.inc.1(at)gmail.com> wrote:
Jay
Here is a photo I saved of the snot valve with a swagelock valve.
At the time the post did not give a part number.
Maybe someone will recognize the valve and share the part number
Mark
N621 CJ
<IMG_4524.jpg>
On Sat, Oct 31, 2020 at 8:14 PM Warren Hill <hill(at)doctor-hill.com (hill(at)doctor-hill.com)> wrote:
| Quote: | Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread.
| Quote: | On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:
did you tap the new valve? size?
| Quote: | On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.
Warren Hill
N464TW
Mesa, AZ
<Swagelok.jpg>
|
|
|
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
k7wx
Joined: 24 May 2010
Posts: 117
|
| Posted: Sun Nov 01, 2020 7:05 am Post subject: Swagelok |
|
|
Hello Mark,
For the Yak-52, it's the Swagelok SS-43GM4-S4.
For the CJ, a typical install requires a right angle adaptor and a different right angle Swagelok valve. If you need this part number I’ll get it later today.
Attached are some images.
Warren
N464TW
[img]cid:509517C5-0E6C-409C-9782-356E707CC9F2[/img] [img]cid:B8602EEA-ACEA-4B48-8640-02C3B6906E5B[/img]
| Quote: | On Nov 1, 2020, at 3:26 AM, Mark Pennington <pennington.construction.inc.1(at)gmail.com (pennington.construction.inc.1(at)gmail.com)> wrote:
Jay
Here is a photo I saved of the snot valve with a swagelock valve.
At the time the post did not give a part number.
Maybe someone will recognize the valve and share the part number
Mark
N621 CJ
<IMG_4524.jpg>
On Sat, Oct 31, 2020 at 8:14 PM Warren Hill <hill(at)doctor-hill.com (hill(at)doctor-hill.com)> wrote:
| Quote: | Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread.
| Quote: | On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:
did you tap the new valve? size?
| Quote: | On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.
Warren Hill
N464TW
Mesa, AZ
<Swagelok.jpg>
|
|
|
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
357.51 KB |
| Viewed: |
5160 Time(s) |
|
| Description: |
|
| Filesize: |
384.2 KB |
| Viewed: |
5160 Time(s) |
|
|
|
| Back to top |
|
|
k7wx
Joined: 24 May 2010
Posts: 117
|
| Posted: Sun Nov 01, 2020 8:49 am Post subject: Swagelok |
|
|
One additional item. If not already done. The bottom thread of the snot bottle will need to be tapped to accept the input side of the Swagelock valve, which I believe is ¼-inch NPT. After completing the tap, be sure to completely wash out the many small metal fragments produced. It’s helpful to do the tap a little less than you think is needed and then screw int the Swagelock valve until it is tight. If a ¼ to ½ turn more is needed to properly align the value, run the tap just a little more. This way the final valve position will not end up at some odd angle.
- - - - - - - - - -
Hello Mark,
For the Yak-52, it's the Swagelok SS-43GM4-S4.
For the CJ, a typical install requires a right angle adaptor and a different right angle Swagelok valve. If you need this part number I’ll get it later today.
Attached are some images.
Warren
N464TW
[img]cid:509517C5-0E6C-409C-9782-356E707CC9F2[/img] [img]cid:B8602EEA-ACEA-4B48-8640-02C3B6906E5B[/img]
| Quote: | On Nov 1, 2020, at 3:26 AM, Mark Pennington <pennington.construction.inc.1(at)gmail.com (pennington.construction.inc.1(at)gmail.com)> wrote:
Jay
Here is a photo I saved of the snot valve with a swagelock valve.
At the time the post did not give a part number.
Maybe someone will recognize the valve and share the part number
Mark
N621 CJ
<IMG_4524.jpg>
On Sat, Oct 31, 2020 at 8:14 PM Warren Hill <hill(at)doctor-hill.com (hill(at)doctor-hill.com)> wrote:
| Quote: | Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread.
| Quote: | On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:
did you tap the new valve? size?
| Quote: | On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.
Warren Hill
N464TW
Mesa, AZ
<Swagelok.jpg>
|
|
|
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
357.51 KB |
| Viewed: |
5154 Time(s) |
|
| Description: |
|
| Filesize: |
384.2 KB |
| Viewed: |
5154 Time(s) |
|
|
|
| Back to top |
|
|
pennington.construction.i
Guest
|
| Posted: Sun Nov 01, 2020 8:58 am Post subject: Swagelok |
|
|
Thank you Mr. Hill
👍👍
On Sun, Nov 1, 2020 at 11:55 AM Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
| Quote: | One additional item. If not already done. The bottom thread of the snot bottle will need to be tapped to accept the input side of the Swagelock valve, which I believe is ¼-inch NPT. After completing the tap, be sure to completely wash out the many small metal fragments produced. It’s helpful to do the tap a little less than you think is needed and then screw int the Swagelock valve until it is tight. If a ¼ to ½ turn more is needed to properly align the value, run the tap just a little more. This way the final valve position will not end up at some odd angle.
- - - - - - - - - -
Hello Mark,
For the Yak-52, it's the Swagelok SS-43GM4-S4.
For the CJ, a typical install requires a right angle adaptor and a different right angle Swagelok valve. If you need this part number I’ll get it later today.
Attached are some images.
Warren
N464TW
[img]cid:17584bd5436ef8af8151[/img] [img]cid:17584bd54367a877b712[/img]
| Quote: | On Nov 1, 2020, at 3:26 AM, Mark Pennington <pennington.construction.inc.1(at)gmail.com (pennington.construction.inc.1(at)gmail.com)> wrote:
Jay
Here is a photo I saved of the snot valve with a swagelock valve.
At the time the post did not give a part number.
Maybe someone will recognize the valve and share the part number
Mark
N621 CJ
<IMG_4524.jpg>
On Sat, Oct 31, 2020 at 8:14 PM Warren Hill <hill(at)doctor-hill.com (hill(at)doctor-hill.com)> wrote:
| Quote: | Both the Chinese adaptors and the Swagelok valves are ⅛-27 NPT pipe thread.
| Quote: | On Oct 31, 2020, at 5:01 PM, William Geipel <wamflight(at)gmail.com (wamflight(at)gmail.com)> wrote:
did you tap the new valve? size?
| Quote: | On Nov 1, 2020, at 8:53 AM, Warren Hill <k7wx(at)earthlink.net (k7wx(at)earthlink.net)> wrote:
Here is a picture of my CJ emergency on-off valve with adaptors that duplicate the original line positions. The Yak-52 probably requires different adaptors. The black handle valve for the main air is Swagelok part number SS-42GF2-A-WN2 and the emergency air red handle part number is SS-42GF2-A-RD-WN2. I suggest placing about 4 turns of nylon tape on the threads to lessen the likelihood of leaks. Replace and forget.
Warren Hill
N464TW
Mesa, AZ
<Swagelok.jpg>
|
|
|
|
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
384.2 KB |
| Viewed: |
5152 Time(s) |
|
| Description: |
|
| Filesize: |
357.51 KB |
| Viewed: |
5152 Time(s) |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
