Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Permit to test

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

alan.twigg775(at)gmail.co
Guest

Posted: Thu Dec 24, 2020 2:43 am Post subject: Permit to test

I got an early Christmas present from LAA HQ, my permit to test has been issued.

Just need flying conditions.

Alan Twigg

Kit 463 Long Wings

G-GIWT

Completed



Sent from my iPhone

stevenwpitt(at)me.com
Guest

Posted: Thu Dec 24, 2020 2:59 am Post subject: Permit to test

Delighted for you.

I know it has been a longgggggggg saga for you so lets hope for clear skies and a successful launch.

Kind regards

Steve

G-SMDH



 	  Quote: 	
		   On 24 Dec 2020, at 10:42, Alan Twigg <alan.twigg775(at)gmail.com> wrote:

 

 

 

 I got an early Christmas present from LAA HQ, my permit to test has been issued.

 Just need flying conditions.

 Alan Twigg

 Kit 463 Long Wings

 G-GIWT

 Completed

 

 Sent from my iPhone

IanCook_1(at)hotmail.com
Guest

Posted: Thu Dec 24, 2020 3:34 am Post subject: Permit to test

At long last Alan, I hope all goes well on the Test flight and look forward to having a get together in 2021, unbelievable we started way back in 2003!!!  Do have a good Christmas and stay Safe.



Best Wishes



Ian



--

Crop_2.jpg

Description:

Filesize:

2.14 MB

Viewed:

4278 Time(s)

Duncan McFadyean

Joined: 18 Jan 2011
Posts: 219

Posted: Thu Dec 24, 2020 5:40 am Post subject: Permit to test

Today was good!



do not archive

 	  Quote: 	
		   On 24 December 2020 at 10:42 Alan Twigg <alan.twigg775(at)gmail.com> wrote:

 

 

 

 

 I got an early Christmas present from LAA HQ, my permit to test has been issued.

 Just need flying conditions.

 Alan Twigg

 Kit 463 Long Wings

 G-GIWT

 Completed

 

 Sent from my iPhone

budyerly@msn.com

Joined: 05 Oct 2019
Posts: 286
Location: Florida USA

Posted: Thu Dec 24, 2020 6:40 am Post subject: Permit to test

Alan,

Congratulations on a job well done.

The birth of an airplane, stirs many emotions.  Relief, joy, anticipation, doubt, and pride.



What makes an airplane meet all your expectations is attention to detail, confidence in your ground testing and your flight preparation.



Best Regards,

Bud Yerly

--

wdaniell.longport(at)gmai
Guest

Posted: Thu Dec 24, 2020 12:33 pm Post subject: Permit to test

congratulations - the best Christmas present!



On Thu, Dec 24, 2020, 05:45 Alan Twigg <alan.twigg775(at)gmail.com (alan.twigg775(at)gmail.com)> wrote:



 	  Quote: 	
		  --> Europa-List message posted by: Alan Twigg <alan.twigg775(at)gmail.com (alan.twigg775(at)gmail.com)>

 

 I got an early Christmas present from LAA HQ, my permit to test has been issued.

 Just need flying conditions.

 Alan Twigg

 Kit 463 Long Wings

 G-GIWT

 Completed

 

 Sent from my iPhone

 ===========

 pa-List" rel="noreferrer noreferrer" target="_blank">http://www.matronics.com/Navigator?Europa-List

 ===========

  FORUMS -

 eferrer noreferrer" target="_blank">http://forums.matronics.com

 ===========

 WIKI -

 errer noreferrer" target="_blank">http://wiki.matronics.com

 ===========

 b Site -

           -Matt Dralle, List Admin.

 rel="noreferrer noreferrer" target="_blank">http://www.matronics.com/contribution

 ===========

rparigoris

Joined: 24 Nov 2009
Posts: 792

Posted: Sun Dec 27, 2020 3:48 pm Post subject: Re: Permit to test

Hi Alan Congratulations! Curious, why small wheels on wingtips? Ron P.

alan.twigg775(at)gmail.co
Guest

Posted: Sun Dec 27, 2020 10:55 pm Post subject: Permit to test

Ron, No wheels on wingtips yet, only fixed outriggers.

I am thinking of fitting some wingtip wheels, to allow retraction of the outriggers thus reducing drag, but not for now.



Sent from my iPad



 	  Quote: 	
		   On 27 Dec 2020, at 23:48, rparigoris <rparigor(at)hotmail.com> wrote:

 

 

 

 Hi Alan Congratulations! Curious, why small wheels on wingtips? Ron P.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=499838#499838

rparigoris

Joined: 24 Nov 2009
Posts: 792

Posted: Mon Dec 28, 2020 2:05 pm Post subject: Re: Permit to test

Hi Alan Thank you for reply, I saw a pic and assumed it was your bird. Ian is the pic your bird? If yes, why the small wheels on wingtips? Ron P.

alan.twigg775(at)gmail.co
Guest

Posted: Tue Dec 29, 2020 12:14 am Post subject: Permit to test

Ian and I are both glider pilots and go for min drag, both Ian and I went for a wheel at the spar extension but he being ahead of me discovered that, with the outrigger retracted, the aileron drags on the ground. Ian has used a wingtip wheel from a Ventus glider, mounted further aft.

Alan 



Sent from my iPhone



 	  Quote: 	
		   On 28 Dec 2020, at 22:08, rparigoris <rparigor(at)hotmail.com> wrote:

 

 

 

 Hi Alan Thank you for reply, I saw a pic and assumed it was your bird. Ian is the pic your bird? If yes, why the small wheels on wingtips? Ron P.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=499853#499853

rparigoris

Joined: 24 Nov 2009
Posts: 792

Posted: Tue Dec 29, 2020 10:23 am Post subject: Re: Permit to test

Hi Alan Does Ian retract outriggers manually and use a wing runner to launch? What's estimated performance increase retracted? Thx. Ron P.

alan.twigg775(at)gmail.co
Guest

Posted: Tue Dec 29, 2020 10:53 pm Post subject: Permit to test

Ian does use a wing runner with retracted outriggers, I am uncertain of performance increase, I will ask him.

Ian also flies an Argus, self launching glider with wingtip wheels, I used to fly such an aircraft, wingtip runners is the norm.

Regards to all for the new year.

Alan



Sent from my iPad



 	  Quote: 	
		   On 29 Dec 2020, at 18:23, rparigoris <rparigor(at)hotmail.com> wrote:

 

 

 

 Hi Alan Does Ian retract outriggers manually and use a wing runner to launch? What's estimated performance increase retracted? Thx. Ron P.

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=499878#499878

IanCook_1(at)hotmail.com
Guest

Posted: Wed Dec 30, 2020 2:52 am Post subject: Permit to test

Hi,

    I have used a wing tip holder (a person) with the O/Rs removed when operating from grass (as per a normal glider), however on hard surfaces, although there is still not much clearance between the ground and the down going aileron, I used the wing tip wheel and the wing lifts straight away, as the A/C accelerates quickly, much sooner than on my Arcus M self-launching glider with its limited power to weight ratio.  I have done quite a lot of gliding but have not measured the performance gained with the O/R wheels removed. With prop feathered, U/C retracted, O/Rs and tip wheels fitted at 55 knots IAS the glide is about 22.8:1, rate of sink 240 ft/m. There is a rapid increase in sink below 52 knots, so although it will fly down to the 42 knots (stall) the min sink just increases, so there is no point in flying too slowly unless the thermal is good with a very small core. The main concern while gliding is to total lack of visibility, when flying from the left-hand seat, into a right hand turn due to the mounting bar for the cockpit doors.  If anybody knows of a bubble canopy installation on a Europa, I would be very interested?  Still days in the UK are very rare, my ASI and PE errors were within a few knots, but the figures are as observed and not been corrected for ISA standards. The cowling radiator hole need blocking up and all the leaks around the main U/C wheel and wing fairings need sorting as well as working wing tips rather than what Don did just to reduce to wing bending moment. It would then get to the advertised 25:1 or better?



Regards



Ian Cook



--

Glide_Performance_G-CBHI.xlsx

Description:

Download

Filename:

Glide_Performance_G-CBHI.xlsx

Filesize:

19.72 KB

Downloaded:

166 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum