 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Greg McFarlane
Joined: 12 Apr 2012
Posts: 57
Location: Albany Western Australia
|
 Posted: Tue Jan 12, 2021 1:25 am Post subject: Oil Breather/Separator |
 |
|
Just Got the AntiSplat Breather/Separator.............. For both four and six cyl engines units the inlet/outlets are 3/4” My engine IO-540 standard from Vans and the Vans supplied ally extension for breather is 1”. Has anyone fitted the ASA and down sized everything to fit the 3/4” inlet/outlet ? ....... Also which plug have been used to return the oil back to the engine ? ASA show the four cyl engine and the plug just in front of the prop Governor, that’s not applicable to the RV10 IO-540, but there is a plug just below the R Mag pad That’s the plug in the photo with screwdriver pointer. ............ Know there’s different views on returning the oil/potential water mix back to the engine, but I’m over that and I’ve decided to do it. 😱.Appreciate any feedback.(not on putting the oil back)
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
281.79 KB |
| Viewed: |
3101 Time(s) |
|
|
|
| Back to top |
|
 |
carl.froehlich(at)verizon
Guest
|
| Posted: Tue Jan 12, 2021 7:25 am Post subject: Oil Breather/Separator |
|
|
Yep - did that on my RV-10. I just used some short lengths of appropriate diameter tubing, then inserted the 3/4” tubing into it.
On the oil return, strongly recommend not doing that. Just fashion a collection can to take the blow by oil. You don’t want to put that back in your engine. I used a standard old school Brasso type can, painted to match the engine baffles and fashioned a mount from aluminum scraps and a could of Adel clamps.
Between oil changes I might get ~1/2” in the can.
Carl
| Quote: | On Jan 12, 2021, at 4:36 AM, Greg McFarlane <grbcmcfarlane(at)gmail.com> wrote:
Just Got the AntiSplat Breather/Separator.............. For both four and six cyl engines units the inlet/outlets are 3/4” My engine IO-540 standard from Vans and the Vans supplied ally extension for breather is 1”. Has anyone fitted the ASA and down sized everything to fit the 3/4” inlet/outlet ? ....... Also which plug have been used to return the oil back to the engine ? ASA show the four cyl engine and the plug just in front of the prop Governor, that’s not applicable to the RV10 IO-540, but there is a plug just below the R Mag pad That’s the plug in the photo with screwdriver pointer. ............ Know there’s different views on returning the oil/potential water mix back to the engine, but I’m over that and I’ve decided to do it. 😱.Appreciate any feedback.(not on putting the oil back)
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=500151#500151
Attachments:
http://forums.matronics.com//files/16747274_9740_4c65_bbcb_f5ecc28a5f4a_126.jpeg
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
