Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Z-14 question

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

Voyager

Joined: 30 Jun 2020
Posts: 77

Posted: Sat May 29, 2021 2:07 pm Post subject: Z-14 question

Bob, a question about Z-14.  I am considering this architecture for my S-21.



The starter/cross-feed switch is listed as S700-2-7, but the figure looks more like a 2-5 and the function seems to make that switch the correct choice.  I can’t see a reason why the non-starter cross-feed position would also be momentary.  Is this just a typo on the switch designation?



Regards,

Matt Whiting



Sent from my iPad

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Sat May 29, 2021 7:10 pm Post subject: Z-14 question

At 05:06 PM 5/29/2021, you wrote:

  	  Quote: 	
		  --> AeroElectric-List message posted by: "Matthew S. Whiting" <m.whiting(at)frontier.com>



 Bob, a question about Z-14.  I am considering this architecture for my S-21.



 The starter/cross-feed switch is listed as S700-2-7, but the figure looks more like a 2-5 and the function seems to make that switch the correct choice.  I can’t see a reason why the non-starter cross-feed position would also be momentary.  Is this just a typo on the switch designation? 	


   Yes, be sure you're getting the latest revision

   level of any Z-figure from the website. The

   current revision for Z-14 dated 2013 is "P"

   where the switch callout as indeed corrected to

   S702-2-5.



 

   Bob . . .



   Un impeachable logic: George Carlin asked, "If black boxes

   survive crashes, why don't they make the whole airplane

   out of that stuff?"

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Voyager

Joined: 30 Jun 2020
Posts: 77

Posted: Sun May 30, 2021 4:32 am Post subject: Z-14 question

Hmmmm.  I got it from the web site so I thought it was the latest.  I got it here: http://www.aeroelectric.com/Books/Connection/AppZ_12A3.pdf



I just checked and this version is still incorrect.  I am assuming there must be another location or maybe you only update the CAD files and I don’t have a CAD program to read those so I usually look at the PDFs.  I will find a .DWG viewer and check the CAD version.

Thanks,

Matt



Sent from my iPad



 	  Quote: 	
		  On May 29, 2021, at 11:13 PM, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com> wrote:



  At 05:06 PM 5/29/2021, you wrote:

  	  Quote: 	
		  --> AeroElectric-List message posted by: "Matthew S. Whiting" <m.whiting(at)frontier.com>



 Bob, a question about Z-14.  I am considering this architecture for my S-21.



 The starter/cross-feed switch is listed as S700-2-7, but the figure looks more like a 2-5 and the function seems to make that switch the correct choice.  I can’t see a reason why the non-starter cross-feed position would also be momentary.  Is this just a typo on the switch designation? 	


   Yes, be sure you're getting the latest revision

   level of any Z-figure from the website. The

   current revision for Z-14 dated 2013 is "P"

   where the switch callout as indeed corrected to

   S702-2-5.



 

   Bob . . .



   Un impeachable logic: George Carlin asked, "If black boxes

   survive crashes, why don't they make the whole airplane

   out of that stuff?"

     =================================== =================================== =================================== =================================== ===================================

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

david(at)carter.net
Guest

Posted: Sun May 30, 2021 4:55 am Post subject: Z-14 question

http://www.aeroelectric.com/PPS/Adobe_Architecture_Pdfs/



On Sun, May 30, 2021 at 6:33 AM Matthew S. Whiting <m.whiting(at)frontier.com (m.whiting(at)frontier.com)> wrote:



 	  Quote: 	
		  Hmmmm.  I got it from the web site so I thought it was the latest.  I got it here: http://www.aeroelectric.com/Books/Connection/AppZ_12A3.pdf



I just checked and this version is still incorrect.  I am assuming there must be another location or maybe you only update the CAD files and I don’t have a CAD program to read those so I usually look at the PDFs.  I will find a .DWG viewer and check the CAD version.

Thanks,

Matt



Sent from my iPad



 	  Quote: 	
		  On May 29, 2021, at 11:13 PM, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:



  At 05:06 PM 5/29/2021, you wrote:

  	  Quote: 	
		  --> AeroElectric-List message posted by: "Matthew S. Whiting" <m.whiting(at)frontier.com (m.whiting(at)frontier.com)>



 Bob, a question about Z-14.  I am considering this architecture for my S-21.



 The starter/cross-feed switch is listed as S700-2-7, but the figure looks more like a 2-5 and the function seems to make that switch the correct choice.  I can’t see a reason why the non-starter cross-feed position would also be momentary.  Is this just a typo on the switch designation? 	


   Yes, be sure you're getting the latest revision

   level of any Z-figure from the website. The

   current revision for Z-14 dated 2013 is "P"

   where the switch callout as indeed corrected to

   S702-2-5.



 

   Bob . . .



   Un impeachable logic: George Carlin asked, "If black boxes

   survive crashes, why don't they make the whole airplane

   out of that stuff?"

     ========== ========== ========== ========== ==========   

	




	




-- 

---

David Carter

david(at)carter.net (david(at)carter.net)

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

johnbright

Joined: 14 Dec 2011
Posts: 165
Location: Newport News, VA

Posted: Sun May 30, 2021 5:03 am Post subject: Re: Z-14 question

 	  Voyager wrote: 	
		  Hmmmm.  I got it from the web site so I thought it was the latest... 	




I made a cheat sheet.



https://docs.google.com/document/d/1iR03DwNeHZy8hO7xBtALPb4_Tl0EY3OdZnAEIxpfMVY/edit?usp=sharing

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
John Bright, RV-6A, at FWF, O-360
Z-101 single batt dual alt SDS EM-5-F.
john_s_bright@yahoo.com, Newport News, Va
N1921R links

Voyager

Joined: 30 Jun 2020
Posts: 77

Posted: Sun May 30, 2021 5:25 am Post subject: Z-14 question

Thanks.  I’d been in this directory once before, but somehow found my way to the older one this last time.



Sent from my iPad



 	  Quote: 	
		  On May 30, 2021, at 8:58 AM, David Carter <david(at)carter.net> wrote:



http://www.aeroelectric.com/PPS/Adobe_Architecture_Pdfs/



On Sun, May 30, 2021 at 6:33 AM Matthew S. Whiting <m.whiting(at)frontier.com (m.whiting(at)frontier.com)> wrote:



 	  Quote: 	
		  Hmmmm.  I got it from the web site so I thought it was the latest.  I got it here: http://www.aeroelectric.com/Books/Connection/AppZ_12A3.pdf



I just checked and this version is still incorrect.  I am assuming there must be another location or maybe you only update the CAD files and I don’t have a CAD program to read those so I usually look at the PDFs.  I will find a .DWG viewer and check the CAD version.

Thanks,

Matt



Sent from my iPad



 	  Quote: 	
		  On May 29, 2021, at 11:13 PM, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:



  At 05:06 PM 5/29/2021, you wrote:

  	  Quote: 	
		  --> AeroElectric-List message posted by: "Matthew S. Whiting" <m.whiting(at)frontier.com (m.whiting(at)frontier.com)>



 Bob, a question about Z-14.  I am considering this architecture for my S-21.



 The starter/cross-feed switch is listed as S700-2-7, but the figure looks more like a 2-5 and the function seems to make that switch the correct choice.  I can’t see a reason why the non-starter cross-feed position would also be momentary.  Is this just a typo on the switch designation? 	


   Yes, be sure you're getting the latest revision

   level of any Z-figure from the website. The

   current revision for Z-14 dated 2013 is "P"

   where the switch callout as indeed corrected to

   S702-2-5.



 

   Bob . . .



   Un impeachable logic: George Carlin asked, "If black boxes

   survive crashes, why don't they make the whole airplane

   out of that stuff?"

     ========== ========== ========== ========== ==========   

	




	




-- 

---

David Carter

david(at)carter.net (david(at)carter.net)

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Sun May 30, 2021 8:47 pm Post subject: Z-14 question

At 07:30 AM 5/30/2021, you wrote:

  	  Quote: 	
		  Hmmmm.  I got it from the web site so I thought it was the latest.  I got it here:  http://www.aeroelectric.com/Books/Connection/AppZ_12A3.pdf 	


   This link is Rev 12 BOOK, not the page-per-system archives . . .



 

   Bob . . .



   Un impeachable logic: George Carlin asked, "If black boxes

   survive crashes, why don't they make the whole airplane

   out of that stuff?"

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Sun May 30, 2021 8:48 pm Post subject: Z-14 question

At 08:25 AM 5/30/2021, you wrote:

  	  Quote: 	
		  Thanks.  I’d been in this directory once before, but somehow found my way to the older one this last time.



 Sent from my iPad



  	  Quote: 	
		  On May 30, 2021, at 8:58 AM, David Carter <david(at)carter.net> wrote:



 

  http://www.aeroelectric.com/PPS/Adobe_Architecture_Pdfs/ 	
	


   These are the PPS archives where BOTH autocad

   dwg and Acrobat pdf files are updated and

   stored.



 

 

   Bob . . .



   Un impeachable logic: George Carlin asked, "If black boxes

   survive crashes, why don't they make the whole airplane

   out of that stuff?"

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Voyager

Joined: 30 Jun 2020
Posts: 77

Posted: Mon May 31, 2021 9:36 am Post subject: Z-14 question

Thanks, Bob!



Matt



Sent from my iPad



 	  Quote: 	
		  On May 31, 2021, at 12:50 AM, Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com> wrote:



  At 08:25 AM 5/30/2021, you wrote:

  	  Quote: 	
		  Thanks.  I’d been in this directory once before, but somehow found my way to the older one this last time.



 Sent from my iPad



  	  Quote: 	
		  On May 30, 2021, at 8:58 AM, David Carter <david(at)carter.net> wrote:



 

  http://www.aeroelectric.com/PPS/Adobe_Architecture_Pdfs/ 	
	


   These are the PPS archives where BOTH autocad

   dwg and Acrobat pdf files are updated and

   stored.



 

 

   Bob . . .



   Un impeachable logic: George Carlin asked, "If black boxes

   survive crashes, why don't they make the whole airplane

   out of that stuff?"

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum