 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
JonathanMilbank
Joined: 14 Apr 2012
Posts: 388
Location: Aberdeen area
|
 Posted: Thu Nov 11, 2021 3:46 pm Post subject: Five-yearly fuel and oil hose replacements |
 |
|
Today Karen of Europa kindly sent me the prices per metre of rubber hoses exclusive of VAT:
"The prices of the fuel and oil hoses are as follows:
IH-000 6mm fuel hose : £8.80/metre
IH-001 8mm fuel hose : £9.00/metre
OIL/12 12mm oil hose : £28.75/metre"
Unfortunately she also informed me that Europa doesn't stock the considerably more expensive fuel hoses, which are better able to cope with ethanol.
So I have a couple of questions, particularly because I want to buy the right spec of each and not to spend more than necessary.
What length of oil hose do I need to order from Karen which would be sufficient for installation in an XS, without ordering too much?
What lengths of the two different sizes of fuel hoses do I need for an XS with a 912ULS engine, what are the specification numbers and who supplies these?
Thank you.
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
Dave Disney
Joined: 16 Aug 2010
Posts: 54
Location: Weston-Super-Mare
|
| Posted: Fri Nov 12, 2021 7:45 am Post subject: Re: Five-yearly fuel and oil hose replacements |
|
|
Hi Jonathan,
I'm just replacing the fuel and oil lines on my aircraft. I ordered 3m of Parker Push-Lok 836-8 from Listers (01215256485), cost was £100.61 incl VAT and del. I had about 400mm left over.
I needed 8 metres of 8mm (5/16) tube and 5 metres of 6mm (1/4) tube. I used Gates Barricade tube for carburettors, it's good for 50psi and is a bit more flexible than the injection hose. I couldn't get mine from the same supplier so I got the 6mm from https://www.moss-europe.co.uk/fuel-hose-gates-barricade-ethanol-proof-1-4-id-per-metre-gfh1025x.html and 8mm from https://www.partsinmotion.co.uk/index.php?option=com_virtuemart&view=productdetails&virtuemart_category_id=313&virtuemart_product_id=155116&Itemid=139 the 8mm hose was 7.5 metres on a roll which was 'just' enough.
Your aircraft may require different amounts from mine as they have all been built differently. 30min with a tape measure with the top cowl off and a bit of crawling around underneath should give you an accurate enough figure to order both sets of hoses. My aircraft is an XS mono with 912ULS.
Read this thread http://forums.matronics.com/viewtopic.php?t=16772840&highlight=fuel+lines
Hope this helps
Dave
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
