 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
daaza22
Joined: 09 Sep 2020
Posts: 33
|
 Posted: Thu May 12, 2022 9:47 am Post subject: Wing painting Jig |
 |
|
Hi everybody...
As a follow on from my last post on painting.
I have the Classic foam wings as anybody any suggestions
on Jig for rotating the wings while painting ?
Cheers Darren
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
kingsnjan(at)westnet.com.
Guest
|
| Posted: Fri May 13, 2022 3:56 pm Post subject: Wing painting Jig |
|
|
Darren,
I used my own version of the attached. Worked brilliantly. A bit of
work to knock it up but worth it.
Note the wire brace from the rear wing pin onto the frame. . . . very
important.
Cheers
Kingsley in Oz
On 13.05.22 3:47 am, daaza22 wrote:
| Quote: |
Hi everybody...
As a follow on from my last post on painting.
I have the Classic foam wings as anybody any suggestions
on Jig for rotating the wings while painting ?
Cheers Darren
|
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
| Description: |
|
| Filesize: |
88.69 KB |
| Viewed: |
2018 Time(s) |
|
| Description: |
|
| Filesize: |
93.43 KB |
| Viewed: |
2018 Time(s) |
|
| Description: |
|
| Filesize: |
168.61 KB |
| Viewed: |
2018 Time(s) |
|
| Description: |
|
| Filesize: |
162.27 KB |
| Viewed: |
2018 Time(s) |
|
| Description: |
|
| Filesize: |
118.46 KB |
| Viewed: |
2018 Time(s) |
|
| Description: |
|
| Filesize: |
108.06 KB |
| Viewed: |
2018 Time(s) |
|
|
|
| Back to top |
|
|
daaza22
Joined: 09 Sep 2020
Posts: 33
|
| Posted: Sun May 15, 2022 12:48 pm Post subject: Re: Wing painting Jig |
|
|
wow thats a great rig ...not sure I am up to building 1 the same ,but it gives me a base to dream up something similar .
cheers Darren
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
Area-51
Joined: 03 May 2021
Posts: 392
|
| Posted: Sun May 15, 2022 7:39 pm Post subject: Re: Wing painting Jig |
|
|
Rotisseries are the best; especially for prep work; you could also just buy a couple of padded automotive panel stands and spray the bottom first then flip the wing over a few days later when cured and spray the top; the paint will flow out nicely off the gun... kingsley's method is the best option as the paint remains soft for six weeks after painting to leaving it on panel stands may leave an impression mark... or paint the bottom mount the wing on the fuse and paint the top and leave it cure.
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
freddythek10(at)gmail.com
Guest
|
| Posted: Sun May 15, 2022 8:24 pm Post subject: Wing painting jig |
|
|
I put this together out of wood which happened to be laying around without breaking a sweat…key components were two, 16 foot long truss joists and some plastic pipe cut offs…not precious, but it did the job...
[img]cid:B750777C-53FA-495A-84DF-E8330A4EDD4C[/img]
[img]cid:8B6CC336-E39B-42E8-A071-147FA4288A6B[/img]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
| Description: |
|
| Filesize: |
245.56 KB |
| Viewed: |
1983 Time(s) |
|
| Description: |
|
| Filesize: |
267.22 KB |
| Viewed: |
1983 Time(s) |
|
|
|
| Back to top |
|
|
daaza22
Joined: 09 Sep 2020
Posts: 33
|
| Posted: Mon May 16, 2022 9:03 am Post subject: Re: Wing painting Jig |
|
|
I think that Freddys jig as given my an idea that I can safely put together .
If it works out I will post some photos .
Cheers All and keep those ideas coming
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
kingsnjan(at)westnet.com.
Guest
|
| Posted: Mon May 16, 2022 3:58 pm Post subject: Wing painting Jig |
|
|
On 16.05.22 1:39 pm, Area-51 wrote:
> kingsley's method is the best option
I hasten to say that the photos I posted of the rotisserie set-up were
originally offered by Michael Parkin in the UK and the idea was NOT mine.
As stated in my post, I used my own version based on Michael's so credit
has to go to Michael for the idea.
Cheers
Kingsley
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
