 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Dave Saylor
Joined: 11 Jan 2015
Posts: 209
Location: GILROY, CA
|
 Posted: Sat Sep 24, 2022 12:26 pm Post subject: Tow bar hole reinforcement? |
 |
|
Can someone please point me to the vendor for these? Thanks!
[img]cid:ii_l8gd24lt0[/img]
--Dave
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
1.44 MB |
| Viewed: |
7686 Time(s) |
|
_________________
--Dave
KWVI |
|
| Back to top |
|
 |
sandro(at)lumiella.com
Guest
|
| Posted: Sat Sep 24, 2022 1:08 pm Post subject: Tow bar hole reinforcement? |
|
|
https://flyboyaccessories.com/
Sandro Lumiella
-------- Messaggio originale --------
Da: Dave Saylor <saylor.dave(at)gmail.com>
Data: 24/09/22 22:34 (GMT+01:00)
A: rv10-list(at)matronics.com
Oggetto: RV10-List: Tow bar hole reinforcement?
Can someone please point me to the vendor for these? Thanks!
[img]cid:com_samsung_android_email_attachmentprovider_1_14738_RAW_1664053658237[/img]
--Dave
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
1.44 MB |
| Viewed: |
7685 Time(s) |
|
|
|
| Back to top |
|
|
Dave Saylor
Joined: 11 Jan 2015
Posts: 209
Location: GILROY, CA
|
| Posted: Sat Sep 24, 2022 1:17 pm Post subject: Tow bar hole reinforcement? |
|
|
Thank you!
On Sat, Sep 24, 2022 at 2:13 PM sandro <sandro(at)lumiella.com (sandro(at)lumiella.com)> wrote:
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
1.44 MB |
| Viewed: |
7685 Time(s) |
|
_________________
--Dave
KWVI |
|
| Back to top |
|
|
sandro(at)lumiella.com
Guest
|
| Posted: Sat Sep 24, 2022 1:39 pm Post subject: Tow bar hole reinforcement? |
|
|
👍
Cordiali saluti
Sandro Lumiella
-------- Messaggio originale --------
Da: Dave Saylor <saylor.dave(at)gmail.com>
Data: 24/09/22 23:24 (GMT+01:00)
A: rv10-list(at)matronics.com
Oggetto: Re: RV10-List: Tow bar hole reinforcement?
Thank you!
On Sat, Sep 24, 2022 at 2:13 PM sandro <sandro(at)lumiella.com (sandro(at)lumiella.com)> wrote:
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
1.44 MB |
| Viewed: |
7685 Time(s) |
|
|
|
| Back to top |
|
|
gspecketer(at)gmail.com
Guest
|
| Posted: Sat Sep 24, 2022 1:50 pm Post subject: Tow bar hole reinforcement? |
|
|
These are home made.
Sent from my iPad
| Quote: | On Sep 24, 2022, at 4:33 PM, Dave Saylor <saylor.dave(at)gmail.com> wrote:
Can someone please point me to the vendor for these? Thanks!
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
1.44 MB |
| Viewed: |
7685 Time(s) |
|
|
|
| Back to top |
|
|
sportav8r(at)gmail.com
Guest
|
| Posted: Sun Sep 25, 2022 6:36 am Post subject: Tow bar hole reinforcement? |
|
|
If you are very, very careful with your towbar, you will not need these.
Translation: Better get a pair; you will need these.
On Sat, Sep 24, 2022 at 5:55 PM Gary Specketer <gspecketer(at)gmail.com (gspecketer(at)gmail.com)> wrote:
| Quote: | These are home made.
Sent from my iPad
> On Sep 24, 2022, at 4:33 PM, Dave Saylor <saylor.dave(at)gmail.com (saylor.dave(at)gmail.com)> wrote:
>
>
> Can someone please point me to the vendor for these? Thanks!
>
>
>
> --Dave
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rleffler
Joined: 05 Nov 2006
Posts: 680
|
| Posted: Sun Sep 25, 2022 6:50 am Post subject: Tow bar hole reinforcement? |
|
|
I disagree. Even if you are careful, there is a small percentage of time that you’ll not hit the hole. Admittedly, I’ve accidently let the bogart bar slip a couple times a year. After flying for ten years, I had a few paint chips that this covered perfectly. Then there is an issue if you ever have a lineman attempt to put a tow bar on. This does a great job of mitigating all these risks.
From: owner-rv10-list-server(at)matronics.com <owner-rv10-list-server(at)matronics.com> On Behalf Of Bill Boyd
Sent: Sunday, September 25, 2022 10:36 AM
To: rv10-list(at)matronics.com
Subject: Re: RV10-List: Tow bar hole reinforcement?
If you are very, very careful with your towbar, you will not need these.
Translation: Better get a pair; you will need these.
On Sat, Sep 24, 2022 at 5:55 PM Gary Specketer <gspecketer(at)gmail.com (gspecketer(at)gmail.com)> wrote:
| Quote: |
These are home made.
Sent from my iPad
> On Sep 24, 2022, at 4:33 PM, Dave Saylor <saylor.dave(at)gmail.com (saylor.dave(at)gmail.com)> wrote:
>
>
> Can someone please point me to the vendor for these? Thanks!
>
>
>
> --Dave |
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
|
sritchie09(at)gmail.com
Guest
|
| Posted: Sun Sep 25, 2022 7:09 am Post subject: Tow bar hole reinforcement? |
|
|
I think you are both in agreement, see the translation!
On Sun, Sep 25, 2022, at 8:50 AM, Bob Leffler wrote:
| Quote: |
I disagree. Even if you are careful, there is a small percentage of time that you’ll not hit the hole. Admittedly, I’ve accidently let the bogart bar slip a couple times a year. After flying for ten years, I had a few paint chips that this covered perfectly. Then there is an issue if you ever have a lineman attempt to put a tow bar on. This does a great job of mitigating all these risks.
From: owner-rv10-list-server(at)matronics.com <owner-rv10-list-server(at)matronics.com> On Behalf Of Bill Boyd
Sent: Sunday, September 25, 2022 10:36 AM
To: rv10-list(at)matronics.com
Subject: Re: RV10-List: Tow bar hole reinforcement?
If you are very, very careful with your towbar, you will not need these.
Translation: Better get a pair; you will need these.
On Sat, Sep 24, 2022 at 5:55 PM Gary Specketer <gspecketer(at)gmail.com (gspecketer(at)gmail.com)> wrote:
| Quote: |
These are home made.
Sent from my iPad
> On Sep 24, 2022, at 4:33 PM, Dave Saylor <saylor.dave(at)gmail.com (saylor.dave(at)gmail.com)> wrote:
>
>
> Can someone please point me to the vendor for these? Thanks!
>
>
>
> --Dave
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Ceengland
Joined: 11 Oct 2020
Posts: 391
Location: MS
|
| Posted: Sun Sep 25, 2022 8:39 am Post subject: Tow bar hole reinforcement? |
|
|
Please forgive the intrusion (I have no experience with nosewheel pant/towbar conflicts), but I'm wondering if a disc (donut) of 3M clear 'leading edge tape' would accomplish the same thing. Especially if there were a donut of aluminum bonded to the inside of the pant.
Charlie
On Sun, Sep 25, 2022 at 10:12 AM Sam Ritchie <sritchie09(at)gmail.com (sritchie09(at)gmail.com)> wrote:
| Quote: | I think you are both in agreement, see the translation!
On Sun, Sep 25, 2022, at 8:50 AM, Bob Leffler wrote:
| Quote: |
I disagree. Even if you are careful, there is a small percentage of time that you’ll not hit the hole. Admittedly, I’ve accidently let the bogart bar slip a couple times a year. After flying for ten years, I had a few paint chips that this covered perfectly. Then there is an issue if you ever have a lineman attempt to put a tow bar on. This does a great job of mitigating all these risks.
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) <owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)> On Behalf Of Bill Boyd
Sent: Sunday, September 25, 2022 10:36 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: Tow bar hole reinforcement?
If you are very, very careful with your towbar, you will not need these.
Translation: Better get a pair; you will need these.
On Sat, Sep 24, 2022 at 5:55 PM Gary Specketer <gspecketer(at)gmail.com (gspecketer(at)gmail.com)> wrote:
| Quote: |
These are home made.
Sent from my iPad
> On Sep 24, 2022, at 4:33 PM, Dave Saylor <saylor.dave(at)gmail.com (saylor.dave(at)gmail.com)> wrote:
>
>
> Can someone please point me to the vendor for these? Thanks!
>
>
>
> --Dave
|
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Charlie |
|
| Back to top |
|
|
Lew Gallagher
Joined: 04 Jan 2008
Posts: 402
Location: Greenville , SC
|
| Posted: Sun Sep 25, 2022 8:52 am Post subject: Tow bar hole reinforcement? |
|
|
Or as I have done on several nosewheel pants, use a longer capscrew bolt, with a fender washer between the head and a spacer so that the towbar stud is outside the pants with the washer flush with the pants surface. The washer prevents the towbar from ever entering the pants. Works, even for tow jockies not familiar with RVs. I got tired of repairing fiberglass ripped by the towbar not being on the stud.
Later, - Lew
| Quote: |
On 9/25/2022 12:40:41 PM, Charlie England <ceengland7(at)gmail.com> wrote:Please forgive the intrusion (I have no experience with nosewheel pant/towbar conflicts), but I'm wondering if a disc (donut) of 3M clear 'leading edge tape' would accomplish the same thing. Especially if there were a donut of aluminum bonded to the inside of the pant.
Charlie
On Sun, Sep 25, 2022 at 10:12 AM Sam Ritchie <sritchie09(at)gmail.com (sritchie09(at)gmail.com)> wrote:
| Quote: | I think you are both in agreement, see the translation!
On Sun, Sep 25, 2022, at 8:50 AM, Bob Leffler wrote:
| Quote: |
I disagree. Even if you are careful, there is a small percentage of time that you’ll not hit the hole. Admittedly, I’ve accidently let the bogart bar slip a couple times a year. After flying for ten years, I had a few paint chips that this covered perfectly. Then there is an issue if you ever have a lineman attempt to put a tow bar on. This does a great job of mitigating all these risks.
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) <owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)> On Behalf Of Bill Boyd
Sent: Sunday, September 25, 2022 10:36 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: Tow bar hole reinforcement?
If you are very, very careful with your towbar, you will not need these.
Translation: Better get a pair; you will need these.
On Sat, Sep 24, 2022 at 5:55 PM Gary Specketer <gspecketer(at)gmail.com (gspecketer(at)gmail.com)> wrote:
| Quote: |
These are home made.
Sent from my iPad
> On Sep 24, 2022, at 4:33 PM, Dave Saylor <saylor.dave(at)gmail.com (saylor.dave(at)gmail.com)> wrote:
>
>
> Can someone please point me to the vendor for these? Thanks!
>
>
>
> --Dave
|
|
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
non-pilot
crazy about building
NOW OFICIALLY BUILDER #40549
Fly off completed ! |
|
| Back to top |
|
|
rjones560xl@gmail.com
Joined: 29 Jul 2015
Posts: 64
Location: Las Vegas, NV
|
| Posted: Sun Sep 25, 2022 9:33 am Post subject: Tow bar hole reinforcement? |
|
|
I have something similar made out of aluminum that a friend with a lathe made for me. I just bonded them on to the the wheel pants with structural adhesive. There was a short tube turned into the inside as part of it and I set that into cotton flox on the inside to make a metal tube that the tow bar goes into. Stainless would probably be better because it is more scratch resistant.
Robert Jones
| Quote: | On Sep 25, 2022, at 9:42 AM, Charlie England <ceengland7(at)gmail.com> wrote:
Please forgive the intrusion (I have no experience with nosewheel pant/towbar conflicts), but I'm wondering if a disc (donut) of 3M clear 'leading edge tape' would accomplish the same thing. Especially if there were a donut of aluminum bonded to the inside of the pant.
Charlie
On Sun, Sep 25, 2022 at 10:12 AM Sam Ritchie <sritchie09(at)gmail.com (sritchie09(at)gmail.com)> wrote:
| Quote: | I think you are both in agreement, see the translation!
On Sun, Sep 25, 2022, at 8:50 AM, Bob Leffler wrote:
| Quote: |
I disagree. Even if you are careful, there is a small percentage of time that you’ll not hit the hole. Admittedly, I’ve accidently let the bogart bar slip a couple times a year. After flying for ten years, I had a few paint chips that this covered perfectly. Then there is an issue if you ever have a lineman attempt to put a tow bar on. This does a great job of mitigating all these risks.
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) <owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)> On Behalf Of Bill Boyd
Sent: Sunday, September 25, 2022 10:36 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: Tow bar hole reinforcement?
If you are very, very careful with your towbar, you will not need these.
Translation: Better get a pair; you will need these.
On Sat, Sep 24, 2022 at 5:55 PM Gary Specketer <gspecketer(at)gmail.com (gspecketer(at)gmail.com)> wrote:
| Quote: |
These are home made.
Sent from my iPad
> On Sep 24, 2022, at 4:33 PM, Dave Saylor <saylor.dave(at)gmail.com (saylor.dave(at)gmail.com)> wrote:
>
>
> Can someone please point me to the vendor for these? Thanks!
>
>
>
> --Dave
|
|
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Robert J Jones
702-521-1840 |
|
| Back to top |
|
|
Bob Turner
Joined: 03 Jan 2009
Posts: 885
Location: Castro Valley, CA
|
| Posted: Sun Sep 25, 2022 12:31 pm Post subject: Re: Tow bar hole reinforcement? |
|
|
I can honestly say I haven’t had any on/off problems with the Bogart tow bar - once I figured out a trick, which is to use one of your legs as a fulcrum so you can fully control the bar while you slowly close the jaws. Now, what line boys do once out of my sight, I cannot say!
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bob Turner
RV-10 QB |
|
| Back to top |
|
|
Dave Saylor
Joined: 11 Jan 2015
Posts: 209
Location: GILROY, CA
|
| Posted: Sun Sep 25, 2022 5:33 pm Post subject: Tow bar hole reinforcement? |
|
|
I did try leading edge tape. It's no match for an angry Bogert.
We use the Bogert bar and an electric tug. The tug is really the culprit as it's pretty unwieldy.
On Sun, Sep 25, 2022 at 9:42 AM Charlie England <ceengland7(at)gmail.com (ceengland7(at)gmail.com)> wrote:
| Quote: | Please forgive the intrusion (I have no experience with nosewheel pant/towbar conflicts), but I'm wondering if a disc (donut) of 3M clear 'leading edge tape' would accomplish the same thing. Especially if there were a donut of aluminum bonded to the inside of the pant.
Charlie
On Sun, Sep 25, 2022 at 10:12 AM Sam Ritchie <sritchie09(at)gmail.com (sritchie09(at)gmail.com)> wrote:
| Quote: | I think you are both in agreement, see the translation!
On Sun, Sep 25, 2022, at 8:50 AM, Bob Leffler wrote:
| Quote: |
I disagree. Even if you are careful, there is a small percentage of time that you’ll not hit the hole. Admittedly, I’ve accidently let the bogart bar slip a couple times a year. After flying for ten years, I had a few paint chips that this covered perfectly. Then there is an issue if you ever have a lineman attempt to put a tow bar on. This does a great job of mitigating all these risks.
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) <owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com)> On Behalf Of Bill Boyd
Sent: Sunday, September 25, 2022 10:36 AM
To: rv10-list(at)matronics.com (rv10-list(at)matronics.com)
Subject: Re: Tow bar hole reinforcement?
If you are very, very careful with your towbar, you will not need these.
Translation: Better get a pair; you will need these.
On Sat, Sep 24, 2022 at 5:55 PM Gary Specketer <gspecketer(at)gmail.com (gspecketer(at)gmail.com)> wrote:
| Quote: |
These are home made.
Sent from my iPad
> On Sep 24, 2022, at 4:33 PM, Dave Saylor <saylor.dave(at)gmail.com (saylor.dave(at)gmail.com)> wrote:
>
>
> Can someone please point me to the vendor for these? Thanks!
>
>
>
> --Dave
|
|
|
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
--Dave
KWVI |
|
| Back to top |
|
|
Dave Saylor
Joined: 11 Jan 2015
Posts: 209
Location: GILROY, CA
|
| Posted: Sun Sep 25, 2022 5:40 pm Post subject: Tow bar hole reinforcement? |
|
|
Similar, but obviously not always successful: I open the Bogert then clinch the lever arm open against the fork with my right hand. Then I put the opposite side of the bar on into the fairing nice and snug. Then (one very) carefully relax the levered side so it engages. Works 95% of the time.
On Sun, Sep 25, 2022 at 1:41 PM Bob Turner <bobturner(at)alum.rpi.edu (bobturner(at)alum.rpi.edu)> wrote:
| Quote: | --> RV10-List message posted by: "Bob Turner" <bobturner(at)alum.rpi.edu (bobturner(at)alum.rpi.edu)>
I can honestly say I haven’t had any on/off problems with the Bogart tow bar - once I figured out a trick, which is to use one of your legs as a fulcrum so you can fully control the bar while you slowly close the jaws. Now, what line boys do once out of my sight, I cannot say!
--------
Bob Turner
RV-10 QB
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=507942#507942
===========
-List" rel="noreferrer" target="_blank">http://www.matronics.com/Navigator?RV10-List
===========
FORUMS -
eferrer" target="_blank">http://forums.matronics.com
===========
WIKI -
errer" target="_blank">http://wiki.matronics.com
===========
b Site -
-Matt Dralle, List Admin.
="noreferrer" target="_blank">https://matronics.com/contribution
===========
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
--Dave
KWVI |
|
| Back to top |
|
|
sportav8r(at)gmail.com
Guest
|
| Posted: Tue Sep 27, 2022 9:33 am Post subject: Tow bar hole reinforcement? |
|
|
Exactly how I do it. Works every time once you accustom yourself to the
over-center "snap" of the jaws.
When I get too feeble to control the Bogart Bar it's time to hang up the
spurs. 
On Sun, Sep 25, 2022 at 9:43 PM Dave Saylor <saylor.dave(at)gmail.com> wrote:
[quote] Similar, but obviously not always successful: I open the Bogert then
clinch the lever arm open against the fork with my right hand. Then I put
the opposite side of the bar on into the fairing nice and snug. Then (one
very) carefully relax the levered side so it engages. Works 95% of the
time.
On Sun, Sep 25, 2022 at 1:41 PM Bob Turner <bobturner(at)alum.rpi.edu> wrote:
>
>
> I can honestly say I haven’t had any on/off problems with the Bogart tow
> bar - once I figured out a trick, which is to use one of your legs as a
> fulcrum so you can fully control the bar while you slowly close the jaws
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Tim Olson
Joined: 25 Jan 2007
Posts: 2872
|
| Posted: Tue Sep 27, 2022 9:59 am Post subject: Tow bar hole reinforcement? |
|
|
Nah, when you're too feeble to do the Bogert Bar, it's just time to
order yourself a Best Tug A3.  Those are magnificent!
Tim
On 9/27/22 12:32 PM, Bill Boyd wrote:
| Quote: | Exactly how I do it. Works every time once you accustom yourself to the
over-center "snap" of the jaws.
When I get too feeble to control the Bogart Bar it's time to hang up the
spurs.
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Kellym
Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ
|
| Posted: Tue Sep 27, 2022 10:50 am Post subject: Tow bar hole reinforcement? |
|
|
agree!
On 9/27/2022 10:58 AM, Tim Olson wrote:
| Quote: |
Nah, when you're too feeble to do the Bogert Bar, it's just time to
order yourself a Best Tug A3. Those are magnificent!
Tim
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
