 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
woodja51
Joined: 13 May 2015
Posts: 40
Location: MELBOURNE AUSTRALIA
|
 Posted: Tue Sep 27, 2022 5:01 pm Post subject: Nose strut alignment |
 |
|
Does anyone know if there is a way of adjusting the nose strut for straight tracking ? My CJ pulls to the right and I’m wondering if it’s got anything to do with : strut pressure / centreing cam or some other adjustment ? I thought it might be as the LH strut was a bit soft but having gassed that up to about 50 it actually seems to be a bit worse. So , maybe the RHS one needs more gas ? Any hints fellow gurus ??
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
 |
Clouddog
Joined: 02 Jun 2016
Posts: 119
Location: Lebanon, TN
|
| Posted: Wed Sep 28, 2022 6:16 am Post subject: Re: Nose strut alignment |
|
|
I fought this same issue for year. Thought is was a dragging brake, replaced the upper bushings. Measured alignment of main gear. Adjusted the dampner arm.
Finally gave up, bought a new complete assembly from Doug Sap at the time and it fixed it. Don't ask me what the difference was between then the two assemblies. Im.not saying this is the way to go but someone way smarter than me might know a way to address this. I went down the same hole. Good luck
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
Clouddog
Joined: 02 Jun 2016
Posts: 119
Location: Lebanon, TN
|
| Posted: Thu Sep 29, 2022 7:27 am Post subject: Nose strut alignment |
|
|
I purchase the entire nosegear strut assembly complete. All I had to do is remove the large pin holding the nose strut near the lower firewall, lower the unit, reinstall the new assembly and put the tire back on.
Took less than an hour by myself.
Greg
On Wed, Sep 28, 2022, 10:01 Mark Pennington <pennington.construction.inc.1(at)gmail.com (pennington.construction.inc.1(at)gmail.com)> wrote:
| Quote: | Clouddog
What assembly did you purchase. ??
Thank you
Mark
N621CJ
On Wed, Sep 28, 2022 at 10:21 AM Clouddog <Clouddog22(at)gmail.com (Clouddog22(at)gmail.com)> wrote:
--
Replied from my iPhone. Please excuse any typos in the content
|
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
woodja51
Joined: 13 May 2015
Posts: 40
Location: MELBOURNE AUSTRALIA
|
| Posted: Fri Sep 30, 2022 1:58 pm Post subject: Re: Nose strut alignment |
|
|
It’s done it ever since this ( fairly recent ) new strut was put in . I have a few spare ones in garage so might pull one apart to see if there is an adjustment for centre. Might be really simple .. seems to track straight when powered up on brakes before takeoff and nose is compressed a little so Maybe that’s the clue (?)
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
Vic
Joined: 12 Aug 2008
Posts: 116
Location: Southern Bavaria
|
| Posted: Mon Oct 03, 2022 12:28 pm Post subject: Re: Nose strut alignment |
|
|
The only centering device I see is on the front strut. But this is only effective at full extension when landing. So when you see a sideways tendency this will have other causes - like a brake dragging or uneven air fill in tires. The photo is a 18 T part.
Vic
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
406.83 KB |
| Viewed: |
3263 Time(s) |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
