 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
nuckolls.bob(at)aeroelect
Guest
|
 Posted: Wed Oct 18, 2023 7:56 am Post subject: Exceptional product alert |
 |
|
I've been sampling a variety of 'clamp on' ammeters
with particular interest in acquiring one with accurate
DC capability. I brought this on in about 6 months
ago:
https://tinyurl.com/ysqy33hd
This item is offered by a constellation of sources . . .
shop around.
It agrees with lab meters to within a few percent
on DC . . . even in the lower currents. I've had
several that were 'adequate' for troubleshooting
but this one seems to supply good engineering/
design 'data'.
Just moved the G65 battery over to do a cap
check and the clamp-on agreed very well
with the WMR discharge current.
Bob . . .
////
(o o)
===========o00o=(_)=o00o=========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
=================================
In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
 |
Eric Page
Joined: 15 Feb 2017
Posts: 247
|
| Posted: Wed Oct 18, 2023 9:03 am Post subject: Re: Exceptional product alert |
|
|
Link returned a "400 Bad Request" error.
Try this: https://amz.run/7DJO
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
kenryan
Joined: 20 Oct 2009
Posts: 426
|
| Posted: Wed Oct 18, 2023 9:19 am Post subject: Exceptional product alert |
|
|
Am I correct in my interpretation that this device is limited to 100 amp DC?
On Wed, Oct 18, 2023 at 7:59 AM Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:
| Quote: | I've been sampling a variety of 'clamp on' ammeters
with particular interest in acquiring one with accurate
DC capability. I brought this on in about 6 months
ago:
https://tinyurl.com/ysqy33hd
This item is offered by a constellation of sources . . .
shop around.
It agrees with lab meters to within a few percent
on DC . . . even in the lower currents. I've had
several that were 'adequate' for troubleshooting
but this one seems to supply good engineering/
design 'data'.
Just moved the G65 battery over to do a cap
check and the clamp-on agreed very well
with the WMR discharge current.
Bob . . .
////
(o o)
===========o00o=(_)=o00o=========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
=================================
In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.
|
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
Ceengland
Joined: 11 Oct 2020
Posts: 391
Location: MS
|
| Posted: Wed Oct 18, 2023 9:43 am Post subject: Exceptional product alert |
|
|
Nothing I play with would exceed that (starter current is always 'out of the loop' when measuring current). That might change if I decide to play with electric motor power for something, though. 
Charlie
On 10/18/2023 12:18 PM, Ken Ryan wrote:
| Quote: | Am I correct in my interpretation that this device is limited to 100 amp DC?
On Wed, Oct 18, 2023 at 7:59 AM Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:
| Quote: | I've been sampling a variety of 'clamp on' ammeters
with particular interest in acquiring one with accurate
DC capability. I brought this on in about 6 months
ago:
https://tinyurl.com/ysqy33hd
This item is offered by a constellation of sources . . .
shop around.
It agrees with lab meters to within a few percent
on DC . . . even in the lower currents. I've had
several that were 'adequate' for troubleshooting
but this one seems to supply good engineering/
design 'data'.
Just moved the G65 battery over to do a cap
check and the clamp-on agreed very well
with the WMR discharge current.
Bob . . .
////
(o o)
===========o00o=(_)=o00o=========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
=================================
In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.
|
|
 Virus-free.www.avast.com[url=#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________
Charlie |
|
| Back to top |
|
|
kenryan
Joined: 20 Oct 2009
Posts: 426
|
| Posted: Wed Oct 18, 2023 10:03 am Post subject: Exceptional product alert |
|
|
I'm asking because I'm interested in using it on a 540 ah lithium battery connected to a 2800 watt inverter.
On Wed, Oct 18, 2023, 09:46 Charlie England <ceengland7(at)gmail.com (ceengland7(at)gmail.com)> wrote:
| Quote: | Nothing I play with would exceed that (starter current is always 'out of the loop' when measuring current). That might change if I decide to play with electric motor power for something, though.
Charlie
On 10/18/2023 12:18 PM, Ken Ryan wrote:
| Quote: | Am I correct in my interpretation that this device is limited to 100 amp DC?
On Wed, Oct 18, 2023 at 7:59 AM Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:
| Quote: | I've been sampling a variety of 'clamp on' ammeters
with particular interest in acquiring one with accurate
DC capability. I brought this on in about 6 months
ago:
https://tinyurl.com/ysqy33hd
This item is offered by a constellation of sources . . .
shop around.
It agrees with lab meters to within a few percent
on DC . . . even in the lower currents. I've had
several that were 'adequate' for troubleshooting
but this one seems to supply good engineering/
design 'data'.
Just moved the G65 battery over to do a cap
check and the clamp-on agreed very well
with the WMR discharge current.
Bob . . .
////
(o o)
===========o00o=(_)=o00o=========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
=================================
In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.
|
|
Virus-free.www.avast.com[url=#m_-3819102432238277488_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]
|
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
nuckolls.bob(at)aeroelect
Guest
|
| Posted: Wed Oct 18, 2023 11:07 am Post subject: Exceptional product alert |
|
|
At 12:03 PM 10/18/2023, you wrote:
| Quote: | --> AeroElectric-List message posted by: "Eric Page" <edpav8r(at)yahoo.com>
Link returned a "400 Bad Request" error. |
Works for me. Try searching on DC Clamp Meter ACM91
Bob . . .
////
(o o)
===========o00o=(_)=o00o=========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
=================================
In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
nuckolls.bob(at)aeroelect
Guest
|
| Posted: Wed Oct 18, 2023 11:09 am Post subject: Exceptional product alert |
|
|
At 12:18 PM 10/18/2023, you wrote:
| Quote: | | Am I correct in my interpretation that this device is limited to 100 amp DC? |
Yes
Bob . . .
////
(o o)
===========o00o=(_)=o00o=========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
=================================
In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
kenryan
Joined: 20 Oct 2009
Posts: 426
|
| Posted: Wed Oct 18, 2023 11:22 am Post subject: Exceptional product alert |
|
|
Thanks.
On Wed, Oct 18, 2023, 11:12 Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:
| Quote: | At 12:18 PM 10/18/2023, you wrote:
| Quote: | | Am I correct in my interpretation that this device is limited to 100 amp DC? |
Yes
Bob . . .
////
(o o)
===========o00o=(_)=o00o=========
< Go ahead, make my day . . . >
< show me where I'm wrong. >
=================================
In the interest of creative evolution
of the-best-we-know-how-to-do based
on physics and good practice.
|
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|
| Back to top |
|
|
Ceengland
Joined: 11 Oct 2020
Posts: 391
Location: MS
|
| Posted: Wed Oct 18, 2023 12:44 pm Post subject: Exceptional product alert |
|
|
Yikes. Hope you never earn the callsign 'Sparky'.
On 10/18/2023 1:02 PM, Ken Ryan wrote:
| Quote: | I'm asking because I'm interested in using it on a 540 ah lithium battery connected to a 2800 watt inverter.
On Wed, Oct 18, 2023, 09:46 Charlie England <ceengland7(at)gmail.com (ceengland7(at)gmail.com)> wrote:
| Quote: | Nothing I play with would exceed that (starter current is always 'out of the loop' when measuring current). That might change if I decide to play with electric motor power for something, though.
Charlie
On 10/18/2023 12:18 PM, Ken Ryan wrote:
| Quote: | Am I correct in my interpretation that this device is limited to 100 amp DC?
On Wed, Oct 18, 2023 at 7:59 AM Robert L. Nuckolls, III <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:
| Quote: | I've been sampling a variety of 'clamp on' ammeters
with particular interest in acquiring one with accurate
DC capability. I brought this on in about 6 months
ago:
https://tinyurl.com/ysqy33hd
This item is offered by a constellation of sources . . .
shop around.
It agrees with lab meters to within a few percent
on DC . . . even in the lower currents. I've had
several that were 'adequate' for troubleshooting
but this one seems to supply good engineering/
design 'data'.
Just moved the G65 battery over to do a cap
check and the clamp-on agreed very well
with the WMR discharge current.
|
|
[url=#m_-3819102432238277488_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2] [/url]
|
|
| | - The Matronics AeroElectric-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
_________________
Charlie |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
