 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
doug kandle
Joined: 09 Jan 2006
Posts: 33
Location: Boise ID
|
 Posted: Tue Aug 01, 2006 8:33 pm Post subject: 701 Seat Belt Bracket |
 |
|
When I position my seat belt bracket (7F16-3) on the center tunnel,
it appears higher than the picture shown in the assembly guide. I've
measured everything several times and the bolt is 180mm from the
floor (just as the side bracket 7F16-2). Did anyone else notice
this? My central seat belt attachment will be just below the top of
the runnel if I mount it where I think it should be located. I've
sent off an email to Zenith with pictures, but I think they may be
behind due to Oshkosh.
Doug Kandle
CH701
Boise ID
All Airfoils complete,
Finishing forward fuselage
From complete kit
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
 |
cscsail(at)gmavt.net
Guest
|
| Posted: Wed Aug 02, 2006 2:21 am Post subject: 701 Seat Belt Bracket |
|
|
Doug,
I noticed a problem with the tunnel 7-F-11-4 that came0 with my kit. The radius at the top is about 1/2 the 30mm radius shown on the0 drawings making it narrower at the top and also taller than 200mm. I spoke0 with Nick about it and he suggested I install it after the torque tube is0 installed to be sure there aren't any clearance issues. I have had a couple of0 other parts that clearly were not made to the specifications on the drawings and0 probably would not match pictures in the guide.
Gordon
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
Geoff Heap
Joined: 12 Jan 2006
Posts: 266
Location: Lindenwold, New Jersey
|
| Posted: Wed Aug 02, 2006 3:45 am Post subject: Re: 701 Seat Belt Bracket |
|
|
Doug.
I recall seeing the exact same when I installed mine. I stuck with the height from the floor called out in the plans. Imagine the position when you put in a seat.....Geoff
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
