Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Check List

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

dhkey(at)msn.com
Guest

Posted: Wed Aug 02, 2006 9:54 pm Post subject: Check List

Does someone have a check list they can email me? I need one for my 

preflights and didn't want to start from scratch.



Thanks,

David

Ralph Hoover

Joined: 09 Jan 2006
Posts: 206
Location: Central Ohio

Posted: Thu Aug 03, 2006 7:10 am Post subject: Re: Check List

Someone made this one for my Firestar: It is very detailed. You may add or subtract. I would like to see what others are using and maby come up with a better one.



Ohio Ralph

Firestar:Preflight Checklist



Pitot tube:  extended / clear

Static Port: clear

Lift Strut (lower):  pinned / safety clip

Wheel / brakes:  nut & cotter pin / axle bolts

Lift Strut (top):  pinned / safety clip

Leading Edge: check for dents

Wing Tip: aileron counter weight secure

Aileron: hinge pins/cotter pins

Aileron Control Rod:

 Pinned / safety clip / bottom bolt & nut

Gap Seal: secured

Wing Swivels: Bolts / nuts / cotter pins

Wing "Main" Pins: pinned / safety clip

Exhaust: muffler bolts / springs / safety wire

Prop: secure / nicks / spinner / leading edge tape

Tailboom: main bolt / nut / check for dents

Horizontal Stabilize:  front bolt / nut / cotter pin

Guide Wires: good tension

Elevator Hinges: pins / cotter pins / bolt / nut

Elevator Control Cables: 

Clevis’s / bolts / nuts / cotter pins

Rudder Control Cables:

Clevis’s / bolts / nuts / cotter pins

Rudder Hinges: pins / cotter pins

Tailwheel: springs / bolts /nuts / cotter pin

Guide Wire: bolt / castle nut / safety clip

Elevator Hinges: pins / cotter pins / bolt / nut

Guide Wires: good tension

Horizontal Stabilizer: front bolt / nut / cotter pin

Tailboom: main bolt / nut / check for dents

Aileron Control Rod: 

Pinned / safety clip / bottom bolt & nut

Gap Seal: secured

Fuel Pump: fuel lines / pulse line / secured

Spark Plug Wires: secured

Carburetors: 

Secure / filters secure / safety wire / fuel lines

Oil Injection: tank/ pump/ site gauge / cap secured / safety wire

Throttle Cables: secured

Lord Mounts: bolts/ nuts / mounting plate

Aileron: hinge pins/cotter pins

Wing Tip: aileron counter weight secure

Leading Edge: check for dents

Lift Strut (top):  pinned / safety clip

Lift Strut (lower):  pinned / safety clip

Wheel brakes:  / nut & cotter pin / axle bolts

Fuel Tanks: FULL

dhkey(at)msn.com
Guest

Posted: Thu Aug 03, 2006 7:50 am Post subject: Check List

Thanks it's a good start.

Michael Sharp

Joined: 10 Jan 2006
Posts: 118
Location: Oak Grove, MO (Kansas City)

Posted: Thu Aug 03, 2006 5:59 pm Post subject: Check List

David,



I picked this one up off of someone's website I don't remember who's....



Hope it helps..



Mike



--

Check1[1].gif

Description:

Filesize:

19.03 KB

Viewed:

398 Time(s)

_________________
The air up there in the clouds is very pure and fine...And why shouldn't it be?-
--It is the same the angels breathe.
Mark Twain,
Roughing it' 1886

Mike

MKIIIX040

Joined: 31 Mar 2006
Posts: 123
Location: Millinocket, Maine

Posted: Fri Aug 04, 2006 6:13 am Post subject: Check List

David  K., Does your titan exhast come very close to the ignition boxes?

If so how did you deal with it?

Also how and where did you mount the coolant overflow bottle?



Vic

MKIIIX 912

do not archive

--

_________________
MKIIIX040
912UL

dhkey(at)msn.com
Guest

Posted: Fri Aug 04, 2006 9:15 am Post subject: Check List

I didn't know I had titan exhaust. There's a little room near the boxes

 	  Quote: 	
		  From: "Vic Peters" <vicsvinyl(at)verizon.net>

Reply-To: kolb-list(at)matronics.com

To: <kolb-list(at)matronics.com>

Subject: Re: Re: Check List

Date: Fri, 04 Aug 2006 10:09:04 -0400

David  K., Does your titan exhast come very close to the ignition boxes?

If so how did you deal with it?

Also how and where did you mount the coolant overflow bottle?

Vic

MKIIIX 912

do not archive

--

http://www.matronics.com/Navigator?Kolb-List

http://wiki.matronics.com

John Hauck

Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)

Posted: Fri Aug 04, 2006 10:51 am Post subject: Check List

"David Key" <dhkey(at)msn.com>

|

| I didn't know I had titan exhaust. There's a little room near the 

boxes



David:



Those little black boxes cost 700.00 a piece to replace.



When I was running the Titan exhaust system I wrapped that area of the 

tube that was closest to the black box with fiberglass exhaust header 

wrap.  Secured both ends with hose clamps.



Did that fix work.  Reckon so.  Never had an ign problem.



john h

_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama

MKIIIX040

Joined: 31 Mar 2006
Posts: 123
Location: Millinocket, Maine

Posted: Fri Aug 04, 2006 12:36 pm Post subject: Check List

Thanks John (exhast wrap). Maybe you could tell me how you mounted your 

coolant overflow bottle. Thanks for the gas can info also, I was allready to 

buy two 10's at $86 each and have some one weld a minor mod for them. 12 

gals. will do for now.



Vic

MKIIIX 912ul

Maine

do not archive 



--

_________________
MKIIIX040
912UL

John Hauck

Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)

Posted: Fri Aug 04, 2006 1:51 pm Post subject: Check List

|  Maybe you could tell me how you mounted your

| coolant overflow bottle.

|

| Vic

Vic:



Used a nalgene plastic bottle (the kind most little cafes use for 

mustard and catsup.  Welded up a little aluminum bracket with tabs to 

mount to the two 6mm taped holes in the back (opposite prop) of the 

gear box.  Used a couple tie wraps to secure the bottle to the 

bracket.



john h

_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama

John Cooley

Joined: 10 Jan 2006
Posts: 17
Location: Lucedale, Ms.

Posted: Fri Aug 04, 2006 2:53 pm Post subject: Check List

Hi Vic/John,



I just happen to have a picture that shows the bottle in question. Took the

picture in 2004 when John was at Octoberlite fly-in at Ronnie Smith's. Hope

it helps. 



P.S. Hope the picture is not too big for the dial-up folks. I've converted

to Hughes satellite service and things are much better and more expensive. 



Later,

John Cooley




 |  Maybe you could tell me how you mounted your

| coolant overflow bottle.

|

| Vic



--

Fly-in_2004_010.jpg

Description:

Filesize:

473.55 KB

Viewed:

363 Time(s)

_________________
Be Safe,
John Cooley

Ralph Hoover

Joined: 09 Jan 2006
Posts: 206
Location: Central Ohio

Posted: Fri Aug 04, 2006 3:19 pm Post subject: Re: Check List

Quote: "P.S. Hope the picture is not too big for the dial-up folks."



Well John Cooley, Have John Hauck Tighten that Bolt below the black hose with the Blue "T" fitting 1/4 turn more and I did notice several specs of material in that 2 micron filter! Ha, HA!



That picture blowed up so big I needed two days to see it all! Ha!



Ohio Ralph,



P.S. is that "Full Scale"?

ceengland(at)bellsouth.ne
Guest

Posted: Fri Aug 04, 2006 5:26 pm Post subject: Check List

John Cooley wrote:



 	  Quote: 	
		  Hi Vic/John,



I just happen to have a picture that shows the bottle in question. Took the

picture in 2004 when John was at Octoberlite fly-in at Ronnie Smith's. Hope

it helps. 



P.S. Hope the picture is not too big for the dial-up folks. I've converted

to Hughes satellite service and things are much better and more expensive. 



Later,

John Cooley

  



 Truncated!

 ------------------------------------------------------------------------

 This message exceeded the Maximum Message Size set in Preferences, so 

 we have only downloaded the first few lines from the mail server.



 Click here 

 <mailbox://ceengland(at)mail.bellsouth.net/Inbox?number=1084606696&messageid00608042249.k74MnfPn032314%40mail.datasync.com&uidl=%3C200608042249.k74MnfPn032314%40mail.datasync.com%3E> 

 to download the rest of the message.

ElleryWeld(at)aol.com
Guest

Posted: Fri Aug 04, 2006 7:01 pm Post subject: Check List

OK Vic stop down I know you need my help again we can mix a drink and I will make you the little tank holder you need 

 

 You going to the fly in tomorrow ?

 Ellery in Maine also 

 

 do not archive

dhkey(at)msn.com
Guest

Posted: Fri Aug 04, 2006 7:23 pm Post subject: Check List

It will be done.

Thanks,

David



do not archive

 	  Quote: 	
		  David:



Those little black boxes cost 700.00 a piece to replace.



When I was running the Titan exhaust system I wrapped that area of the

tube that was closest to the black box with fiberglass exhaust header

wrap.  Secured both ends with hose clamps.



Did that fix work.  Reckon so.  Never had an ign problem.



john h

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum