Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Riveting forward side skins?

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
jhasbrouck(at)woh.rr.com
Guest
PostPosted: Sun Aug 13, 2006 5:41 pm    Post subject: Riveting forward side skins? Reply with quote
I've searched the archives with no luck for the answer. How do you buck the three rivets associated with the 1042B clip in the aft end of the lower fuse channel? Looks like I'll need something narrower than what I have to get in there. Suggestions would be appreciated. Did you use the modified elevator bucking bar in the channels for the rest of those rivets? Thanks
John Hasbrouck
#40264

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Deems Davis



Joined: 09 Jan 2006
Posts: 925
PostPosted: Sun Aug 13, 2006 8:20 pm    Post subject: Riveting forward side skins? Reply with quote
John, I had the same question when I got to this point. I ended up
modifying the elevator bucking bar (link to pic attached)

http://deemsrv10.com/album/Sec%2029%20Fuse%20Side%20Skins/slides/DSC02624.html

I puzzled over how to cut the bar, but used a high speed electric
grinder with a metal cut-off wheel, went pretty quickly, Filed it
smooth,and dressed it with the scotchbrite.

Deems Davis # 406
Fuse/Finish/Panel
http://deemsrv10.com/
John Hasbrouck wrote:

Quote:
I've searched the archives with no luck for the answer. How do you
buck the three rivets associated with the 1042B clip in the aft end of
the lower fuse channel? Looks like I'll need something narrower than
what I have to get in there. Suggestions would be appreciated. Did
you use the modified elevator bucking bar in the channels for the rest
of those rivets? Thanks
John Hasbrouck
#40264


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
View user's profile Send private message Send e-mail
jhasbrouck(at)woh.rr.com
Guest
PostPosted: Mon Aug 14, 2006 4:21 am    Post subject: Riveting forward side skins? Reply with quote
Thanks Deems, a picture's worth a thousand words!

- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group