Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Bob's Dimmner and Electroluminescent strips

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
N941WR



Joined: 01 May 2006
Posts: 21

PostPosted: Sat Aug 19, 2006 6:48 pm    Post subject: Bob's Dimmner and Electroluminescent strips Reply with quote

I bought an AeroElectric multi light dimmer from a builder who never used it in his aircraft.

The dimmer will work great for the few lights, radio, and transponder I am installing in my RV-9.

One question though, I have an electroluminescent strip above my switch and fuse panel. Can this be controlled through 'lectric Bob's dimmer?


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Bill
Back to top
View user's profile Send private message Visit poster's website
klehman(at)albedo.net
Guest





PostPosted: Sun Aug 20, 2006 8:59 am    Post subject: Bob's Dimmner and Electroluminescent strips Reply with quote

Bill
My homebuilt aeroelectric dimmer works well. The dimmer has a 4 volt
minimum brightness setting for incandescant bulbs. With the small cube
inverter that came with my strips I found that the 4 volt minimum
setting was a bit high so I swapped out the 910 ohm resisistor for a 150
ohm resistor so that the minimum voltage is now about 1.7 volts. You may
find that is not necessary on your installation but I like to dim the
strips quite a bit on dark nights.
Ken

N941WR wrote:

Quote:


I bought an AeroElectric multi light dimmer from a builder who never used it in his aircraft.

The dimmer will work great for the few lights, radio, and transponder I am installing in my RV-9.

One question though, I have an electroluminescent strip above my switch and fuse panel. Can this be controlled through 'lectric Bob's dimmer?

--------
Bill
RV-9 (Working on the finishing kit)





- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
N941WR



Joined: 01 May 2006
Posts: 21

PostPosted: Mon Aug 21, 2006 4:14 am    Post subject: Re: Bob's Dimmner and Electroluminescent strips Reply with quote

Ken,

Thanks for the help. I hope to power it up for the first time today and see how it looks.

If the strip is blinding I'll put a resistor in line with it.

Bill


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Bill
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group