Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

nav and strobe wire

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

schwartzcompany(at)worldn
Guest

Posted: Fri Aug 25, 2006 12:34 pm Post subject: nav and strobe wire

Gentlemen:

  

 I am assembling a YAK 52 I just acquired and I need to get strobe/nav wire  through the wings prior to installing the wings to fuselage. What are  recommendations to do this?    Through leading edge or  through the inspection hole.   Should the wire be put into some  type of flexible tubing?

  

 thanks

  

  

 Robert  Schwartz





 [quote] 	  Quote: 	
		  



.com/Navigator?Yak-List



	
[b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

ReadeG(at)Cairnwood.com
Guest

Posted: Fri Aug 25, 2006 1:01 pm Post subject: nav and strobe wire

Robert:

  

 I fished the cables for  the Wheelen nav/strobe units via a 1/2" schedule 40 pvc pipe anchored at the  flap bay, mid wing inspection plate and at the wing tip.  The pvc does not  touch any moving part, does not vibrate or rattle.   The three points  of attachment (adel clamps) seem quite adequate - it has been in place  for about 500 hours of fairly aggressive operation.

  

 I ran the cables through  the flap bay - as I recall there are holes or gaps in the structure that  work nicely.  I used a combination of silicone and tie wraps to  secure.  I installed rubber grommets where I entered the fuselage.   There is a perfect mounting area for the power pack in the left wing accessible  when you remove the lower wing fairing (yes all 12 dozen  screws!). 

  

 I would be glad to try  some pictures this weekend if you want.

  

 Reade



 [quote]         From: ROBERT SCHWARTZ    [mailto:schwartzcompany(at)worldnet.att.net] 

Sent: Friday, August 25,    2006 4:34 PM

To: yak-list(at)matronics.com

Subject: Yak-List:    Re: nav and strobe wire

   

   {SPAM?} Header    

Gentlemen:

    

   I am assembling a YAK 52 I just acquired and I need to get strobe/nav    wire through the wings prior to installing the wings to fuselage. What are    recommendations to do this?    Through leading edge or    through the inspection hole.   Should the wire be put into some    type of flexible tubing?

    

   thanks

    

    

   Robert  Schwartz





    	  Quote: 	
		   	  Quote: 	
		  



.com/Navigator?Yak-List



	




====================================

s.com/Navigator?Yak-List

====================================

====================================

====================================

contribution

====================================



	
[b]

- The Matronics Yak-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum