Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Foil Shielding

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
nuckollsr(at)cox.net
Guest





PostPosted: Sun Nov 26, 2006 6:18 pm    Post subject: Foil Shielding Reply with quote

Quote:
Bob..

Quote:
Can you suggest a good way to ground shielded wires that use foil for
shielding? I like your method for the braided wire, can find no reference
for foil shielding. Thanks.


As you've observed, wires may be "shielded" by a variety
of techniques. The earliest shielding was accomplished with
an over-braid of fine wires. Obviously, braided wires cannot
offer 100% coverage for shielding effectiveness. Know that for
the vast majority of things we do in airplanes requiring
shielded conductors, one layer of tightly overbraided wires
will achieve 80% or better coverage and is just fine.

I think back in 60' or early 70's, Belden Wire and cable
figured out a simpler way to increase shielding coverage
and simplify construction by using thin aluminum foil to
instead of overbraid. One problem was that the aluminum
foil was a muther-bear to make connections so a "drain wire"
was added to the stranding makeup of the cable. The drain wire
may be inside or outside the foil and is always uninsulated
so that it makes contact with the foil over length of the cable.

See a couple of documents on my website at:

http://www.aeroelectric.com/Mfgr_Data/Wire/Belden

The short answer to your question is, "Don't try to
mess with the aluminum foil as a conductor. Find the
Drain Wire and use it to achieve connection to the
foil."
Bob . . .
---------------------------------------------------------
< What is so wonderful about scientific truth...is that >
< the authority which determines whether there can be >
< debate or not does not reside in some fraternity of >
< scientists; nor is it divine. The authority rests >
< with experiment. >
< --Lawrence M. Krauss >
---------------------------------------------------------


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group