Matronics Email Lists :: View topic - Recommendations for oil filter system

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Recommendations for oil filter system

Matronics Email Lists Forum Index -> Yak-List

View previous topic :: View next topic

Author Message

dsavarese(at)elmore.rr.co
Guest

Posted: Mon Dec 11, 2006 5:38 am Post subject: Recommendations for oil filter system

CJ6's with M14P's - I am looking for information on which spin on oil filter 

system you have added to your airplane.  Any photos will also be very 

helpful.

Thanks for your input.

Dennis



A. Dennis Savarese

334-285-2141 (office)

334-546-8182 (cell)

www.yak-52.com

JBernier(at)dart.org
Guest

Posted: Mon Dec 11, 2006 6:41 am Post subject: Recommendations for oil filter system

Dennis

I used a 10 micron filter plumbed into the oil line that is just prior to entering into the oil cooler. 50 hours on it and absolutely no problems. The location is clean and easy. No lines to cut into, and only one line to form. It keeps the clutter away from the engine. Changing the filter does not spill onto the airframe. Since you don't have to cut any lines, you have the option of going back to the original configuration in the field if you need to. See attached for location and fit. The filter is for high performance autos. If you are interested, I'd have to check my notes on where it came from. 

Jim B. 

 	  Quote: 	
		  >> dsavarese(at)elmore.rr.com 12/11/2006 7:37:28 AM >>>

	




CJ6's with M14P's - I am looking for information on which spin on oil filter 

system you have added to your airplane.  Any photos will also be very 

helpful.

Thanks for your input.

Dennis



A. Dennis Savarese

334-285-2141 (office)

334-546-8182 (cell)

www.yak-52.com

FILTER1880.JPG

Description:

Filesize:

90.35 KB

Viewed:

275 Time(s)

FILTER1884.JPG

Description:

Filesize:

90.56 KB

Viewed:

250 Time(s)

FILTER1885.JPG

Description:

Filesize:

105.37 KB

Viewed:

272 Time(s)

viperdoc(at)mindspring.co
Guest

Posted: Mon Dec 11, 2006 6:42 am Post subject: Recommendations for oil filter system

Have you looked at the Gorrila from Air Wolf?

Doc

 	  Quote: 	
		   [Original Message]

 From: A. Dennis Savarese <dsavarese(at)elmore.rr.com>

 To: <yak-list(at)matronics.com>

 Date: 12/11/2006 7:51:36 AM

 Subject: Recommendations for oil filter system



 

<dsavarese(at)elmore.rr.com>
	


 	  Quote: 	
		  

 CJ6's with M14P's - I am looking for information on which spin on oil

filter 
	


 	  Quote: 	
		   system you have added to your airplane.  Any photos will also be very 

 helpful.

 Thanks for your input.

 Dennis



 A. Dennis Savarese

 334-285-2141 (office)

 334-546-8182 (cell)

 www.yak-52.com

cjpilot710(at)aol.com
Guest

Posted: Mon Dec 11, 2006 6:49 am Post subject: Recommendations for oil filter system

In a message dated 12/11/2006 8:41:47 A.M. Eastern Standard Time,  dsavarese(at)elmore.rr.com writes:

  

 I use a Marion filter and buy the S-28 10 micron filters.  After an  oil and filter change, I can easily cut open the can and check the  filter.  It has a built-in by-pass valve and a port where you can screw in  a pressure switch if you what a 'oil by-pass' light in your cockpit.   

  

 I've use the system on my airplane 'since day one'.  I read some  where, that contaminants in oil larger than 25 micron will cause engine  wear.  So I use the 10 micron filter.  I really believe it kept a lot  more damage from happening to the engine, when at 438 hours a improperly factory  installed ring let go a long with some goodly pieces of piston.  

  

 My engine has 1300 hours on it now.  I use straight 50 or 60 weight  detergent oil, changed every 30 to 35 hours.  Compressions are in the low  to mid 70's.  The engine is now using around 1 qt every 1 1/2 hours.   I also have a pre-oiler which I use on the first start of each day.

  

 Jim "Pappy" Goolsby

  	  Quote: 	
		  -->    Yak-List message posted by: "A. Dennis Savarese"    <dsavarese(at)elmore.rr.com>



CJ6's with M14P's - I am looking for    information on which spin on oil filter 

system you have added to your    airplane.  Any photos will also be very 

helpful.

Thanks for your    input.

Dennis



A. Dennis Savarese

334-285-2141    (office)

334-546-8182  (cell)

www.yak-52.com



	


  [quote][b]

dsavarese(at)elmore.rr.co
Guest

Posted: Mon Dec 11, 2006 7:00 am Post subject: Recommendations for oil filter system

No, but I will.

Thanks

Dennis



---

dsavarese(at)elmore.rr.co
Guest

Posted: Mon Dec 11, 2006 7:02 am Post subject: Recommendations for oil filter system

Thanks Pappy.  Any web links to information and any photos you may  have of the installation will be greatly appreciated.

 Dennis

  

 [quote]   ---

dsavarese(at)elmore.rr.co
Guest

Posted: Mon Dec 11, 2006 7:16 am Post subject: Recommendations for oil filter system

Jim,

I am very interested in finding out more information on the parts required 

and where they can be obtained and any particulars for the installation. 

Feel free to send it off list if you want.  dsavarese(at)elmore.rr.com.

Dennis



---

dsavarese(at)elmore.rr.co
Guest

Posted: Mon Dec 11, 2006 7:25 am Post subject: Recommendations for oil filter system

I think the Gorilla is overkill for our size engines since the Gorilla was 

designed for large radial engines of 2000 Cu.In. and above.  But Airwolf 

does manufacture other remote oil filter kits that could easily be adapted 

to our radial engines.

Dennis

---

rob(at)robinhill.com
Guest

Posted: Mon Dec 11, 2006 7:52 pm Post subject: Recommendations for oil filter system

I have installed an airwolf system on a CJ. They are supporters of the

Redstar magazine. If anyone orders one please thank John (the owner) for

supporting our group.



Since putting on the filter I change oil at 45 hr intervals. In 3 oil

changes I should pay for the system in labor savings.



My oil analysis has also gotten better with the filter.



This is one mod I recommend for all our planes



Rob

--

cd001633(at)mindspring.co
Guest

Posted: Mon Dec 11, 2006 8:16 pm Post subject: Recommendations for oil filter system

Hi Dennis,



I hope all is well with you and yours.



I am using a standard Champion CH48109.  The oil filter adapter is from J.C

Whitney and is listed in their catalog as: Oil Filter Relocation kit, part

#14DY6174A.  Price is about $50.00 for the kit which included other stuff

you won't need.  I have it mounted on the firewall on the right side between

the firewall's edge and the air starter - perfect location (at least for

me).  You will need 2ea -12 90degrees angled fitting (one of them on a

swivel) and the male-to-male threaded adaptor (to accept the CH-4801) - this

is a standard threaded adaptor.  



The filter is mounted inverted, thus minimizing oil spills at change time.

It's been working great for the past 5 years.



Happy Holidays to All Red Star lovers!



Sam Sax

Miami, FL



--

rvfltd(at)televar.com
Guest

Posted: Tue Dec 12, 2006 9:29 am Post subject: Recommendations for oil filter system

Sam,

Does that filter head have a high pressure bypass valve on it?



Always Yakin,

Doug Sapp

Samuel Sax wrote:



[quote]

Hi Dennis,



I hope all is well with you and yours.



I am using a standard Champion CH48109.  The oil filter adapter is from J.C

Whitney and is listed in their catalog as: Oil Filter Relocation kit, part

#14DY6174A.  Price is about $50.00 for the kit which included other stuff

you won't need.  I have it mounted on the firewall on the right side between

the firewall's edge and the air starter - perfect location (at least for

me).  You will need 2ea -12 90degrees angled fitting (one of them on a

swivel) and the male-to-male threaded adaptor (to accept the CH-4801) - this

is a standard threaded adaptor.  



The filter is mounted inverted, thus minimizing oil spills at change time.

It's been working great for the past 5 years.



Happy Holidays to All Red Star lovers!



Sam Sax

Miami, FL



--

cd001633(at)mindspring.co
Guest

Posted: Tue Dec 12, 2006 10:27 am Post subject: Recommendations for oil filter system

Hi Doug,



Yes, it does.  The Champion Oil Filter is a FAA approved filter widely used

on many aircraft.  The high pressure bypass is an FAA requirement for it to

be certified for aviation use.  This is an important point and one of the

reasons I went with this type oil filter.



Sam Sax



--

wlannon(at)cablerocket.co
Guest

Posted: Tue Dec 12, 2006 9:15 pm Post subject: Recommendations for oil filter system

Good point Sam.

The Champion (or other) certificated filter is also strong enough to 

withstand scavenge pump pressure on radial or other dry sump engines. 

Scavenge pressure is unregulated and in certain conditions may reach 300 

psi.



Walt



---

rvfltd(at)televar.com
Guest

Posted: Thu Dec 14, 2006 9:04 am Post subject: Recommendations for oil filter system

Check out  http://www.cessna195.org/ClubEvents/Flyin2004/maintenance_forum.cfm  Some interesting items on cly base nut torquing as well as oil filters.

 

 Always Yakin,

 Doug Sapp

 

 cjpilot710(at)aol.com (cjpilot710(at)aol.com) wrote:

 [quote]               In a message dated 12/11/2006 8:41:47 A.M. Eastern Standard Time, dsavarese(at)elmore.rr.com (dsavarese(at)elmore.rr.com) writes:

    

   I use a Marion filter and buy the S-28 10 micron filters.  After an oil and filter change, I can easily cut open the can and check the filter.  It has a built-in by-pass valve and a port where you can screw in a pressure switch if you what a 'oil by-pass' light in your cockpit.  

    

   I've use the system on my airplane 'since day one'.  I read some where, that contaminants in oil larger than 25 micron will cause engine wear.  So I use the 10 micron filter.  I really believe it kept a lot more damage from happening to the engine, when at 438 hours a improperly factory installed ring let go a long with some goodly pieces of piston.  

    

   My engine has 1300 hours on it now.  I use straight 50 or 60 weight detergent oil, changed every 30 to 35 hours.  Compressions are in the low to mid 70's.  The engine is now using around 1 qt every 1 1/2 hours.  I also have a pre-oiler which I use on the first start of each day.

    

   Jim "Pappy" Goolsby

    	  Quote: 	
		  --> Yak-List message posted by: "A. Dennis Savarese" <dsavarese(at)elmore.rr.com> (dsavarese(at)elmore.rr.com)

     

 CJ6's with M14P's - I am looking for information on which spin on oil filter 

 system you have added to your airplane.  Any photos will also be very 

 helpful.

 Thanks for your input.

 Dennis

     

 A. Dennis Savarese

 334-285-2141 (office)

 334-546-8182 (cell)

 www.yak-52.com

     

     	
   

       	  Quote: 	
		  

	
 [b]

Display posts from previous:

	Matronics Email Lists Forum Index -> Yak-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum