Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

701 wing spar caps

Matronics Email Lists Forum Index -> Zenith-List

View previous topic :: View next topic

Author Message

brothapig(at)HOTMAIL.COM
Guest

Posted: Wed Jan 03, 2007 11:40 am Post subject: 701 wing spar caps

Ok, I'm going to start building my wing spars.  As most 701 builders know, the cap angles (7V2-2 & 3) are a non-standard thickness, special made for Zenith (from what I've heard).  I have heard other people using 3/4 x 3/4 x 1/8" angle for the caps, instead of the .093" thick, which is what I want to do.  I will be asking Zenith approval for this, but I was trying to figure out the new solid rivet length.  Using 1.5 times the rivet diameter as the length protruding before riveting, I came up with 6.144 sixteenths of an inch for a rivet length.  (AN-470-5-6.144)  Does this mean I use AN-470-5-7, or is it close enough to stay with the AN-470-5-6?  What have others done?

Ryan

- The Matronics Zenith-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum