Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Liquid Cooling

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

Float Flyr

Joined: 19 Jul 2006
Posts: 2704
Location: Campbellton, Newfoundland

Posted: Fri Jan 19, 2007 6:19 am Post subject: Liquid Cooling

As a few know I'm the one who  has been asking about the HKS engine (700E).  I definitely won't be  replacing my engine for at least a year.

  

 In the meantime I'd like to  clean up the plane a bit. and the first thing I noticed was the rad hanging off  the belly.  This must have the aerodynamic stability of a brick or  less.  

  

 I have noticed on some of the  pictures here that some of the planes have what looks to be a very nice scoop  mounted to the belly of the plane and could offer a streamlining effect,  directed airflow through the rad and possibly even offer a damper of sorts  for winter flying.  I haven't seen anything like this scoop available  on line and such a scoop isn't mentioned in my construction manual.   Building a mould to fabricate one scoop seems kind of  expensive.

  

 Three   questions.

  

 Are these scoops  available?

 If they are   where  do you get one?

 How much will it  cost?

  

 

Noel  

    [quote][b]

_________________
Noel Loveys
Kitfox III-A
Aerocet 1100 Floats

Fox5flyer
Guest

Posted: Fri Jan 19, 2007 7:15 am Post subject: Liquid Cooling

Building a one time mold isn't expensive if you  just use typical one inch blue board foam then cover it with glass.  When  it's set up remove the foam and you have a scoop.  It almost requires the  airplane be upside down though, but when the wings and engine are removed it  isn't too difficult with Somme help.

 I'm going to attach a photo of mine.  It's on  Sportflight, but the site is down temporarily so I can't send a link.  I'll  try an attachment.

 Deke

 scroll down

  

  	  Quote: 	
		      

   As a few know I'm the one who    has been asking about the HKS engine (700E).  I definitely won't be    replacing my engine for at least a year.

    

   In the meantime I'd like to    clean up the plane a bit. and the first thing I noticed was the rad hanging    off the belly.  This must have the aerodynamic stability of a brick or    less.  

    

   I have noticed on some of the    pictures here that some of the planes have what looks to be a very nice scoop    mounted to the belly of the plane and could offer a streamlining effect,    directed airflow through the rad and possibly even offer a damper of sorts    for winter flying.  I haven't seen anything like this scoop    available on line and such a scoop isn't mentioned in my construction    manual.  Building a mould to fabricate one scoop seems kind of    expensive.

    

   Three     questions.

    

   Are these scoops    available?

   If they are   where    do you get one?

   How much will it    cost?

    

   

Noel

S5c.jpg

Description:

Filesize:

222.43 KB

Viewed:

602 Time(s)

lcfitt(at)sbcglobal.net
Guest

Posted: Fri Jan 19, 2007 8:11 am Post subject: Liquid Cooling

Noel,



I have the scoop offered in the Model IV Speedster kit.  I picked it up from 

a builder in Alaska that didn't want to use it.  Others have gone the hard 

way and built their own.  I don't think the Speedster scoup is still 

available.  Contact John to make sure of that.



Regarding winter flying, the scoop actually enhances cooling.



Lowell



---

Lynn Matteson

Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan

Posted: Fri Jan 19, 2007 9:15 am Post subject: Liquid Cooling

Noel-

I've got a scoop from my IV that I'm not using. It's yours for the  

postage...or actually I owe Deke a lunch for an owed postage deal, so  

you and he could... oh, never mind...let me know where you are.



Lynn

On Jan 19, 2007, at 9:18 AM, Noel Loveys wrote:



 	  Quote: 	
		   As a few know I'm the one who has been asking about the HKS engine  

 (700E).  I definitely won't be replacing my engine for at least a  

 year.



 In the meantime I'd like to clean up the plane a bit. and the first  

 thing I noticed was the rad hanging off the belly.  This must have  

 the aerodynamic stability of a brick or less.



 I have noticed on some of the pictures here that some of the planes  

 have what looks to be a very nice scoop mounted to the belly of the  

 plane and could offer a streamlining effect, directed airflow  

 through the rad and possibly even offer a damper of sorts for  

 winter flying.  I haven't seen anything like this scoop available  

 on line and such a scoop isn't mentioned in my construction  

 manual.  Building a mould to fabricate one scoop seems kind of  

 expensive.



 Three  questions.



 Are these scoops available?

 If they are   where do you get one?

 How much will it cost?



 Noel

 www.matronics.com/Navigator?Kitfox-List _- 

 ============================================================

_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM

Sjklerks(at)aol.com
Guest

Posted: Fri Jan 19, 2007 9:24 am Post subject: Liquid Cooling

Hi Lynn, How much speed would you gain by adding the rad scoop that was  available from skystar.  Jim

  [quote][b]

msm_9949(at)yahoo.com
Guest

Posted: Fri Jan 19, 2007 9:29 am Post subject: Liquid Cooling

Noel,

   

  You have a Model 2, right? As slow (Vne 100) and draggy as the Mod 2 is, do you think the extra weight is justified by the extra couple cruise mph you're likely to gain? 



Lowell Fitt <lcfitt(at)sbcglobal.net> wrote:

  [quote]--> Kitfox-List message posted by: "Lowell Fitt" 



Noel,



I have the scoop offered in the Model IV Speedster kit. I picked it up from 

a builder in Alaska that didn't want to use it. Others have gone the hard 

way and built their own. I don't think the Speedster scoup is still 

available. Contact John to make sure of that.



Regarding winter flying, the scoop actually enhances cooling.



Lowell



---

jdmcbean(at)cableone.net
Guest

Posted: Fri Jan 19, 2007 11:19 am Post subject: Liquid Cooling

Noel,  

            The scoops are available…   

<![if !supportEmptyParas]> <![endif]>  

 AUTOTEXTLIST \s "E-mail Signature" <![endif]-->Fly Safe !!  

John & Debra McBean  

208.337.5111  

www.kitfoxaircraft.com    

"It's not how Fast... It's how Fun!"  

<![endif]--><![if !supportEmptyParas]> <![endif]>  

-----Original Message-----

 From: owner-kitfox-list-server(at)matronics.com [mailto:owner-kitfox-list-server(at)matronics.com]On Behalf Of Noel Loveys

 Sent: Friday, January 19, 2007 7:19 AM

 To: kitfox-list(at)matronics.com

 Subject: Liquid Cooling  

<![if !supportEmptyParas]> <![endif]>  

As a few know I'm the one who has been asking about the HKS engine (700E).  I definitely won't be replacing my engine for at least a year.  

   

In the meantime I'd like to clean up the plane a bit. and the first thing I noticed was the rad hanging off the belly.  This must have the aerodynamic stability of a brick or less.    

   

I have noticed on some of the pictures here that some of the planes have what looks to be a very nice scoop mounted to the belly of the plane and could offer a streamlining effect, directed airflow through the rad and possibly even offer a damper of sorts for winter flying.  I haven't seen anything like this scoop available on line and such a scoop isn't mentioned in my construction manual.  Building a mould to fabricate one scoop seems kind of expensive.  

   

Three  questions.  

   

Are these scoops available?  

If they are   where do you get one?  

How much will it cost?  

   

Noel  

   [quote]<![if !supportEmptyParas]> <![endif]><![if !supportEmptyParas]> <![endif]>          - The Kitfox-List Email Forum -   --> http://www.matronics.com/Navigator?Kitfox-List              - NEW MATRONICS WEB FORUMS -   --> http://forums.matronics.com<![if !supportEmptyParas]> <![endif]>[b]

Float Flyr

Joined: 19 Jul 2006
Posts: 2704
Location: Campbellton, Newfoundland

Posted: Fri Jan 19, 2007 12:02 pm Post subject: Liquid Cooling

It is a very draggy Model II...  very late numbers (736).  It is on a nice sleek set of Aerocet straight  floats.  As I was saying I've been doing a bit of work on the plane  the past few days and would like to clean it up a bit.  Also dragging those  floats up hill does require the engine to do 1quite a bit of work.   I  thought I could install some kind of shutter in the intake of a scoop to cut  down the airflow through the scoop in the winter.  To be honest an extra  mile or two per hour really doesn't interest me too much on this kind of plane  but if I can improve the cooling efficiency in the summer and control the air  through the rad in the winter I think it will be worth it.

  

 I am also considering trying  some plastic fairings on the wing struts.

  

 It seems there are a few of  those scoops around and several of them are on planes.  I'll post some  measurements and see what fits.

  

  

 

Noel [quote]   

   --

_________________
Noel Loveys
Kitfox III-A
Aerocet 1100 Floats

Float Flyr

Joined: 19 Jul 2006
Posts: 2704
Location: Campbellton, Newfoundland

Posted: Fri Jan 19, 2007 12:32 pm Post subject: Liquid Cooling

Thanks Lowell.  I expect if John has one in stock he'll post it.  That way

if any one wants to install a scoop they will know where to get them.



Noel



[quote] --

_________________
Noel Loveys
Kitfox III-A
Aerocet 1100 Floats

Lynn Matteson

Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan

Posted: Fri Jan 19, 2007 2:11 pm Post subject: Liquid Cooling

Beats me...I'm aircooled, so I've never looked into the scoop  

situation. But this (the one that I have) is the one that Skystar  

provided.



Lynn

On Jan 19, 2007, at 12:23 PM, Sjklerks(at)aol.com wrote:



 	  Quote: 	
		   Hi Lynn, How much speed would you gain by adding the rad scoop that  

 was available from skystar.  Jim

 www.matronics.com/Navigator?Kitfox-List _- 

 ============================================================

_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM

jdmcbean(at)cableone.net
Guest

Posted: Fri Jan 19, 2007 4:07 pm Post subject: Liquid Cooling

Thought I did... they are available...



Fly Safe !!

John & Debra McBean

208.337.5111

www.kitfoxaircraft.com

"It's not how Fast... It's how Fun!"



--

Float Flyr

Joined: 19 Jul 2006
Posts: 2704
Location: Campbellton, Newfoundland

Posted: Fri Jan 19, 2007 8:02 pm Post subject: Liquid Cooling

Great!   The next questions are how heavy and how much.  



Noel



[quote] --

_________________
Noel Loveys
Kitfox III-A
Aerocet 1100 Floats

Kfyellowbird(at)cs.com
Guest

Posted: Mon Jan 22, 2007 10:00 pm Post subject: Liquid Cooling

I purchased one from Skystar.  I would think the new Kitfox would have them available.

 

 Lowell 560KF  [quote][b]

avtar412

Joined: 15 Nov 2006
Posts: 22
Location: New Zealand

Posted: Mon Jan 22, 2007 10:57 pm Post subject: Re: Liquid Cooling

http://ph.groups.yahoo.com/group/airsoob/photos/browse/32fc

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum