Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

AN3 Nut Torque Values…….or any Torque Values depending on

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
rparigoris



Joined: 24 Nov 2009
Posts: 796
PostPosted: Tue Oct 29, 2013 10:57 am    Post subject: AN3 Nut Torque Values…….or any Torque Values depending on Reply with quote
Hi Group
Quick note on breaking AN bolts, if the surface the nut is contacting is not perpendicular to the shank of the bolt, it will load sideways and quite easily break. For instance on my tiebar, and flap drive holes I did a poor job of drilling at 90 degrees to the surface. I am sure if I tightened the hardware to maximum rated spec they would break. I used these to compensate for my sins
http://www.mcmaster.com/#self-aligning-washers/=p5ec85
Note you can get #10 with a maximum correction of 4 degrees and also 5 degrees, the 5 degree is larger. I think I only used the 5 degree on 1 of my tiebar bolts, it needed just a slight bit more ability to correct so I Reduxed with Flox and let set before full tightening.
Ron Parigoris [quote][b]

- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group