 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
djaflyact
Joined: 14 Oct 2013
Posts: 27
|
 Posted: Wed Nov 27, 2013 7:15 pm Post subject: More Mod 78 Fun! |
 |
|
Today, I have determined that the next wing to go into the fuselage will not work. I made a board the right thickness and did a trial run. It looked like it it wasn't going to fit and the board verified. The problem is the aileron control arm bolts (CS08). It looks like it might clear the CS08 arm, but not the bolt heads.
There are some possibilities to address this new problem. Replace the AN bolts with counter sunk screws. That might not be enough and the CS08 bracket might be too close to the spar.
How about bending (adjusting) the CS08 bracket? The starboard CS08 has plenty of clearance and could be bent forward to allow more clearance of the cross link with the fuel tank. The port S08 could be bent toward the rear to allow more clearance to the new spar. It has plenty of clearance with the fuel tank.
Anybody know if the CS08 arms can be removed? That would make modifying them easier. Any ideas for tweaking them in place?
As Rozanna Rozanna Danna used to say - "If its not one thing, its something else!"
Thanks,
Dave
A227
Mini U2
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
peterz(at)zutrasoft.com
Guest
|
| Posted: Thu Nov 28, 2013 8:29 am Post subject: More Mod 78 Fun! |
|
|
Hi Dave,
Sorry to hear of your fitment challenges RRD indeed!
Just curious if you heard back from Charlie regarding his ballpark figure?
Cheers and blue skies,
Pete
On Wed, Nov 27, 2013 at 10:15 PM, djaflyact <djaflyact(at)gmail.com (djaflyact(at)gmail.com)> wrote:
[quote]--> Europa-List message posted by: "djaflyact" <djaflyact(at)gmail.com (djaflyact(at)gmail.com)>
Today, I have determined that the next wing to go into the fuselage will not work. I made a board the right thickness and did a trial run. It looked like it it wasn't going to fit and the board verified. The problem is the aileron control arm bolts (CS08). It looks like it might clear the CS08 arm, but not the bolt heads.
There are some possibilities to address this new problem. Replace the AN bolts with counter sunk screws. That might not be enough and the CS08 bracket might be too close to the spar.
How about bending (adjusting) the CS08 bracket? The starboard CS08 has plenty of clearance and could be bent forward to allow more clearance of the cross link with the fuel tank. The port S08 could be bent toward the rear to allow more clearance to the new spar. It has plenty of clearance with the fuel tank.
Anybody know if the CS08 arms can be removed? That would make modifying them easier. Any ideas for tweaking them in place?
As Rozanna Rozanna Danna used to say - "If its not one thing, its something else!"
Thanks,
Dave
A227
Mini U2
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=414373#414373
===========
="_blank">www.aeroelectric.com
ooks.com" target="_blank">www.buildersbooks.com
et="_blank">www.homebuilthelp.com
et="_blank">www.mypilotstore.com
"_blank">www.mrrace.com
="_blank">http://www.matronics.com/contribution
le, List Admin.
===========
target="_blank">http://www.matronics.com/Navigator?Europa-List
===========
http://forums.matronics.com
===========
[b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
djaflyact
Joined: 14 Oct 2013
Posts: 27
|
| Posted: Fri Nov 29, 2013 6:56 pm Post subject: Re: More Mod 78 Fun! |
|
|
More information on the dreaded Mod 78. It looks like the interference is the bolt heads on the top of the CS08 brackets. By going with countersunk screws, the spar should clear. Stay tuned.
I have not gotten the asking price for Charlie Bock's Tri-gear classic. I think it is around $40K, but I need to verify that.
Dave
A227
Mini U2
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
