Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Kolb Mk3 POH/checklist

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
rowedenny



Joined: 09 Mar 2008
Posts: 338
Location: Western PA

PostPosted: Wed Nov 27, 2013 5:47 pm    Post subject: Kolb Mk3 POH/checklist Reply with quote

Mike,
Here is the front and back sides of my laminated sheets. These passed my airworthiness inspection as a POH. My engine is single ignition so you will have to edit in your dual ignition check, and you may not want to turn on your EIS (if you use one) until after the engine is started to avoid inductive spikes from the starter motor and solenoid coil that could harm your electronics.
I hope this helps.

Dennis "Skid" Rowe
Mk3, 690L-70, Leechburg, PA


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List



photo_1.JPG
 Description:
 Filesize:  544.82 KB
 Viewed:  4803 Time(s)

photo_1.JPG



photo_2.JPG
 Description:
 Filesize:  651.83 KB
 Viewed:  4803 Time(s)

photo_2.JPG


Back to top
View user's profile Send private message Send e-mail
lownslow



Joined: 19 May 2013
Posts: 15

PostPosted: Wed Nov 27, 2013 6:27 pm    Post subject: Re: Kolb Mk3 POH/checklist Reply with quote

awesome! thanks Denny! I appreciate it

- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
Mike Welch



Joined: 13 Feb 2011
Posts: 272

PostPosted: Sat Nov 30, 2013 10:08 am    Post subject: Kolb Mk3 POH/checklist Reply with quote

Denny,

Is it possible for you to scan and save your POH as a PDF file? That way we could make our
own unique changes and print the POH. It would be much easier than retyping your entire manual.

Thanks,
Mike Welch
do not archive


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message Send e-mail
rlaird



Joined: 10 Jan 2006
Posts: 373
Location: Houston

PostPosted: Sat Nov 30, 2013 10:29 am    Post subject: Kolb Mk3 POH/checklist Reply with quote

I have an unfinished (about 80% done) POH I created for my Kolb, in Microsoft Word format.

If anyone wants it, please send me a private email:  rlaird(at)cavediver.com (rlaird(at)cavediver.com)


It's nothing special, and probably begs for improvement, but it was accepted at the time I got my N-number as being adequate.
It was based on a POH I wrote for the Aventura II that I used to own, and the content needs to be reviewed to make sure something leftover from the previous POH didn't get overlooked and included.  Plus, the Appendix needs to be finished (diagrams/photos), which would have to be done by each individual since most of the Kolbs built are a little different.


  -- Robert

On Sat, Nov 30, 2013 at 12:08 PM, Mike Welch <mdnanwelch7(at)hotmail.com (mdnanwelch7(at)hotmail.com)> wrote:
[quote]--> Kolb-List message posted by: Mike Welch <mdnanwelch7(at)hotmail.com (mdnanwelch7(at)hotmail.com)>

Denny,

     Is it possible for you to scan and save your POH as a PDF file?  That way we could make our
own unique changes and print the POH.  It would be much easier than retyping your entire manual.

Thanks,
Mike Welch
do not archive

===========
="_blank">www.aeroelectric.com
ooks.com" target="_blank">www.buildersbooks.com
et="_blank">www.homebuilthelp.com
et="_blank">www.mypilotstore.com
"_blank">www.mrrace.com
="_blank">http://www.matronics.com/contribution
le, List Admin.
===========
arget="_blank">http://www.matronics.com/Navigator?Kolb-List
===========
http://forums.matronics.com
===========



[b]


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List

_________________
~~~~~~~~~~~~~~~~~~~
Robert Laird
formerly: MkIIIc w/ 912ULS & Gyrobee
current: Autogyro Cavalon w/ 914ULS
Houston, TX area
http://www.Texas-Flyer.com
Back to top
View user's profile Send private message Visit poster's website AIM Address
rowedenny



Joined: 09 Mar 2008
Posts: 338
Location: Western PA

PostPosted: Sat Nov 30, 2013 11:49 am    Post subject: Kolb Mk3 POH/checklist Reply with quote

Mike,
I'll try that when I get a chance, never made a PDF file in my life, but hey, can't be that hard. I'll try to get to it later today.

Dennis "Skid" Rowe
Mk3, 690L-70, Leechburg, PA

Quote:
On Nov 30, 2013, at 1:08 PM, Mike Welch <mdnanwelch7(at)hotmail.com> wrote:



Denny,

Is it possible for you to scan and save your POH as a PDF file? That way we could make our
own unique changes and print the POH. It would be much easier than retyping your entire manual.

Thanks,
Mike Welch
do not archive






- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group