 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
bob88
Joined: 24 Feb 2013
Posts: 99
|
 Posted: Tue Dec 17, 2013 10:40 pm Post subject: Wire labels |
 |
|
Anyone out there have a good system or product for labeling wires. I'm starting to lose track of which goes where...
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
glastar(at)gmx.net
Guest
|
| Posted: Wed Dec 18, 2013 12:15 am Post subject: Wire labels |
|
|
Bob,
on my last project I produced wire labels out of an Excel sheet (very
tiny font) cut it and did put it on the wire with some clear heatshrink.
Worked out fine, however there are as well nice labeling units around
(check in google for wire label printer.
Cheers Werner
On 18.12.2013 07:40, bob88 wrote:
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rick.mcbride(at)me.com
Guest
|
| Posted: Wed Dec 18, 2013 2:47 am Post subject: Wire labels |
|
|
I've used this system from Hawk Labeling on three airplanes. With the cost of the machine and the heat shrink tubing it's certainly not the least expensive option. But it produces an exceptionally nice wire labels that looks very professional and are easy to produce and read.
http://www.hawklabeling.com/store/department.php?cPath=3_495
Rick
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
flying-nut(at)cfl.rr.com
Guest
|
| Posted: Wed Dec 18, 2013 5:50 am Post subject: Wire labels |
|
|
I bought white heat-shrink and wrote the info on before shrinking. Use
the ultra fine sharpie. In places where the wire was smaller than the
heated shrink I put on a couple layers of blue painters tape. I have a
couple sizes of drift pins/nail sets that I used to hold the heat shrink
while marking.
Linn
On 12/18/2013 1:40 AM, bob88 wrote:
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
cjhukill(at)cox.net
Guest
|
| Posted: Wed Dec 18, 2013 7:31 am Post subject: wire labels |
|
|
I use white, blue and yellow heat shrink tubing, write the label on the tubing with a sharpie and then shrink. The writing shrinks down with the tubing and is very legible. It actually looks cool, (like how did you write so small?!?).
The color of the tubing can be coded as well. Yellow is power from CB to switch, Blue is power from switch to devise, as an example.
Using a sharpie makes a very permanent label, and if you use the correct size tubing, the label is difficult to slide off the wire, but can be slid down to the terminal after crimping. Initially shrink the label back about six inches so it won’t slide off until you final trim the wire, then move it down to the terminal.
Been doing it this way for many years and the labels still look like the day they were done.
Chris Hukill
finishing up wiring and getting ready to hang the motor
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
dave.saylor.aircrafters(a
Guest
|
| Posted: Wed Dec 18, 2013 8:38 am Post subject: Wire labels |
|
|
The sharpie method is quick and easy, as others are describing. Works great. One thing about every label printer I've used is that they waste a lot of tubing. I buy white tubing on a reel and just snip each piece as needed.
Dave Saylor
831-750-0284 CL
On Tue, Dec 17, 2013 at 10:40 PM, bob88 <marty.crooks(at)comcast.net (marty.crooks(at)comcast.net)> wrote:
[quote] --> RV10-List message posted by: "bob88" <marty.crooks(at)comcast.net (marty.crooks(at)comcast.net)>
Anyone out there have a good system or product for labeling wires. I'm starting to lose track of which goes where...
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=415805#415805
===========
target="_blank">www.aeroelectric.com
ldersbooks.com" target="_blank">www.buildersbooks.com
" target="_blank">www.homebuilthelp.com
" target="_blank">www.mypilotstore.com
get="_blank">www.mrrace.com
t="_blank">http://www.matronics.com/contribution
-Matt Dralle, List Admin.
===========
" target="_blank">http://www.matronics.com/Navigator?RV10-List
===========
MS -
k">http://forums.matronics.com
===========
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26320
Location: Livermore CA USA
|
| Posted: Wed Dec 18, 2013 9:59 am Post subject: Wire labels |
|
|
At 10:40 PM 12/17/2013 Tuesday, you wrote:
| Quote: |
Anyone out there have a good system or product for labeling wires. I'm starting to lose track of which goes where...
|
I use this product and love it:
<http://www.mattsrv8.com/users/display_log.php?user=MattsRV8&project=2273&category=9044&log=173811&row=1>http://www.mattsrv8.com/users/display_log.php?user=MattsRV8&project=2273&category=9044&log=173811&row=1
Attached are a few samples of what they look like in action.
Matt
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 180+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
Matt's Livermore Airport Live ATC Stream!
Check out the live ATC stream directly from my hangar at the Livermore
Airport. Includes both Tower and Ground transmissions. Archives too!
For entertainment purposes only. http://klvk.matronics.com
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
397.06 KB |
| Viewed: |
10686 Time(s) |
|
| Description: |
|
| Filesize: |
1.15 MB |
| Viewed: |
10686 Time(s) |
|
| Description: |
|
| Filesize: |
759.42 KB |
| Viewed: |
10686 Time(s) |
|
| Description: |
|
| Filesize: |
212.71 KB |
| Viewed: |
10686 Time(s) |
|
| Description: |
|
| Filesize: |
134.52 KB |
| Viewed: |
10686 Time(s) |
|
| Description: |
|
| Filesize: |
256.92 KB |
| Viewed: |
10686 Time(s) |
|
| Description: |
|
| Filesize: |
668.42 KB |
| Viewed: |
10686 Time(s) |
|
| Description: |
|
| Filesize: |
772.96 KB |
| Viewed: |
10686 Time(s) |
|
| Description: |
|
| Filesize: |
493.09 KB |
| Viewed: |
10686 Time(s) |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
bob88
Joined: 24 Feb 2013
Posts: 99
|
| Posted: Wed Dec 18, 2013 10:27 am Post subject: Re: Wire labels |
|
|
Matt:
Your labels look great but you didn't mention what you use to do them...
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26320
Location: Livermore CA USA
|
|
| Back to top |
|
|
woxofswa
Joined: 12 Aug 2008
Posts: 349
Location: AZ
|
| Posted: Thu Dec 19, 2013 9:17 am Post subject: Re: Wire labels |
|
|
I bought a gadget called a Bee3. It was pretty cheap and easy to use with nice results, but I do have probably $50 into the cartridges.
http://www.ksun.com/label-printers/labelshop/BEE3.html
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Myron Nelson
Mesa, AZ
Flew May 10 2014
Last edited by woxofswa on Thu Dec 19, 2013 9:20 am; edited 1 time in total |
|
| Back to top |
|
|
mds4878
Joined: 09 Feb 2009
Posts: 48
Location: Mound, MN.
|
| Posted: Thu Dec 19, 2013 10:01 am Post subject: Re: Wire labels |
|
|
I use a BRADY BMP21 label printer that sells for around 200.00.
With it you can print wire marker sleeves that slide on the wire and shrink
with heat. They have 4 sizes and you can also buy 3 sizes of flat label
tape. The system works great.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
RV-10 #40447
Fuselage almost done. |
|
| Back to top |
|
|
johngoodman
Joined: 18 Sep 2006
Posts: 530
Location: GA
|
|
| Back to top |
|
|
rleffler
Joined: 05 Nov 2006
Posts: 680
|
| Posted: Thu Dec 19, 2013 12:52 pm Post subject: Wire labels |
|
|
John,
You just need a larger monitor and/or phone! :^)
Bob
Sent from my iPhone
On Dec 19, 2013, at 3:37 PM, "johngoodman" <johngoodman(at)earthlink.net> wrote:
Matt,
You should be ashamed [Laughing] Putting on photos so big that we have to scroll left to right to read even one sentence.
John
--------
#40572 Phase One complete and flying.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=415872#415872
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
|
Matt Dralle
Site Admin
Joined: 08 Nov 2005
Posts: 26320
Location: Livermore CA USA
|
| Posted: Fri Dec 20, 2013 9:53 am Post subject: Wire labels |
|
|
Yeah, you're totally right, John. I feel guilty! I was going to use my normal scaled versions but the detail of the lettering wasn't good enough to show them off. So I took the full-resolution versions and just cropped down to the detail I wanted. Trouble is, those were STILL too huge! Darn that 36MP Nikon D800! 
Matt
At 12:37 PM 12/19/2013 Thursday, you wrote:
| Quote: |
Matt,
You should be ashamed [Laughing] Putting on photos so big that we have to scroll left to right to read even one sentence.
John
--------
#40572 Phase One complete and flying.
|
-
Matt Dralle
RV-8 #82880 N998RV "Ruby Vixen"
http://www.mattsrv8.com - Matt's Complete RV-8 Construction Log
http://www.mattsrv8.com/Mishap - Landing Mishap Rebuild Log
http://www.youtube.com/MattsRV8 - Matt's RV-8 HDTV YouTube Channel
Status: 172+ Hours TTSN - Rebuilding Fuselage After Landing Mishap...
RV-6 #20916 N360EM "The Flyer"
http://www.mattsrv6.com - Matt's RV-6 Revitalization Log
Status: 180+ Hours Since Purchase - Upgrades Complete; Now In Full Flyer Mode
Matt's Livermore Airport Live ATC Stream!
Check out the live ATC stream directly from my hangar at the Livermore
Airport. Includes both Tower and Ground transmissions. Archives too!
For entertainment purposes only. http://klvk.matronics.com
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Matt Dralle
Matronics Email List Administrator |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
Putting on photos so big that we have to scroll left to right to read even one sentence.